| 08-05-2011, 08:03 AM | #1 |
|
SCCA B Street
117
Rep 660
Posts |
Front Camber
Has anyone had the car aligned for max camber on the stock suspension?
Hoping for at least -1.5 a side but would love to hear from anyone that has looked it.
__________________
|
| 08-05-2011, 12:35 PM | #3 |
|
Colonel
 292
Rep 2,898
Posts |
Just did an alignment on mine and, even pulling the pins, couldn't get more than -1.3
 I believe that others, including Dan Parker, were able to get around -1.7. EDIT: My car is at the stock height and is not lowered. Neil Last edited by MDORPHN; 08-05-2011 at 01:56 PM.. |
|
Appreciate
0
|
| 08-05-2011, 01:07 PM | #4 |
78
Rep 684
Posts |
With pins pulled and 1" lowering, you can get 1.7-1.8 degrees of negative front camber.
Rear camber uses an eccentric washer and has a much wider range of adjustment.
__________________
|
|
Appreciate
0
|
| 08-05-2011, 03:58 PM | #5 |
|
SCCA B Street
117
Rep 660
Posts |
SCCA autox stock class rules will not allow for the car to lowered, so I am hoping for -1.3 or better....
__________________
|
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|
