|
|
|
02-11-2011, 02:37 AM | #1 |
Enlisted Member
0
Rep 39
Posts |
JB+ reliability and codes at max
Just wondering who has experience running JB+ at the maximum setting and whether or not you threw any codes. I have a 2008 running at about 75% right now and would like to turn it to 100% if it won't throw any codes. Also would the max setting be ok for the turbos/engine long term? I run 93 octane only, if it matters. Thanks in advance to anyone who shares.
[u2b]<iframe title="YouTube video player" width="480" height="390" src="http://www.youtube.com/embed/CSvgaSo_xUY?rel=0" frameborder="0" allowfullscreen></iframe>[/u2b] Last edited by calhounboi; 02-12-2011 at 04:29 PM.. |
02-11-2011, 06:39 AM | #2 |
First Lieutenant
6
Rep 340
Posts |
I ran mine on a 100% with solenoid by-pass for about 6 months (before up grading to JB4) and never threw any tune-related codes. The only codes I show are related to the DPs. I have BT cable to scan and clear codes. I recommend having the BT cable.
__________________
2019 911 GTS
2017 M4 CV 2017 Mini JCW |
Appreciate
0
|
02-11-2011, 07:36 AM | #3 |
Enlisted Member
0
Rep 39
Posts |
Finally found the answers I was looking for after searching enough. Thanks for the info on the solenoid bypass, that's what I searched to find all the answers that I couldn't find before.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|