FS: Swift Spec-R M4 Springs Used ~3k miles

[Redacre]

BIMMERPOST / Classifieds

Asking Price:

Sold

Item Interest

I bought these used from a local forum member (here's the original post https://f80.bimmerpost.com/forums/sh....php?t=1650695) with 1K miles on them and I put an additional 2K miles on them including one track session. Great stance and awesome performance, but they were too low for my steep driveway with a passenger in the car. They were professionally installed and are being professionally removed this weekend for a HAS kit instead. I do not have the original box anymore.

$150 picked up / 210 shipped within CONUS.

Pics on the car are below and pics of springs themselves will be uploaded on Sunday.

[mrjsmith88]

Originally Posted by Redacre

I bought these used from a local forum member (here's the original post https://f80.bimmerpost.com/forums/sh....php?t=1650695) with 1K miles on them and I put an additional 2K miles on them including one track session. Great stance and awesome performance, but they were too low for my steep driveway with a passenger in the car. They were professionally installed and are being professionally removed this weekend for a HAS kit instead. I do not have the original box anymore.

$175 + shipping (should be around $30). Local pickup gets a free beer.

Pics on the car are below and pics of springs themselves will be uploaded on Sunday.

Can these fit an f80?

[EGbeater]

Originally Posted by mrjsmith88

Can these fit an f80?

Yes, but Swift makes a different kit/part # for the F80 for a reason... the spring rates are a little different, but the biggest difference is the rear spring length/ride height change:

https://www.swiftsprings.com/product...prings-spec-r/

[Walmart Parking Lot]

Just sent this to my friend, he might buy. But what kind of side skirt is that?

[Redacre]

Here are pictures of the springs themselves, but they are dirty. I'll clean them up tomorrow and post more pics.




///

Originally Posted by mrjsmith88

Can these fit an f80?

These are specifically designed for the F82 as was helpfully posted already. They might physically fit but you're better off buying F80 specific springs.

Originally Posted by Walmart Parking Lot

Just sent this to my friend, he might buy. But what kind of side skirt is that?

Thanks! Side skirts are just eBay skirts that I bought based on research from the eBay product rating thread.

[m4dman]

Originally Posted by Redacre

Here are pictures of the springs themselves, but they are dirty. I'll clean them up tomorrow and post more pics.




///



These are specifically designed for the F82 as was helpfully posted already. They might physically fit but you're better off buying F80 specific springs.



Thanks! Side skirts are just eBay skirts that I bought based on research from the eBay product rating thread.

Can you pm me the link to those sideskirts? Any fitment issues ?

[Redacre]

More pictures posted below. I have a much smaller box now and will not reuse the massive HAS kit package.

[Redacre]

BUMP

Price dropped to $150 local pickup / $210 shipped within CONUS (if paying with PayPal please add fees too)

[AMGHUNTR]

@Redacre
What HAS kit did you go with and do you have EDC?

[Blanco_M4]

Originally Posted by Redacre

BUMP

Price dropped to $150 local pickup / $210 shipped within CONUS (if paying with PayPal please add fees too)

So $170?? I kinda want to drive up from LA for that free beer... 🤔

[Alpine_F82]

Bump these are great springs anyone wanting them I ran with 437m wheels and yes it is low but it is the perfect stance all around, I ran 12mm all around on Michelin pilot 4s tires stock sizes, Doesn't rub but it is low expect sideways over speed bumps etc. but it's worth it. The car rides better in my opinion if you like a more straight forward feel as the stock seems much to bouncy when going over bumps and around corners. Would highly recommend the upgrade. I'm now currently running on 20inch HRE's with wider tires and still no problem. I have the EDC

[Redacre]

PMs sent and replied to!

These will be gone by tomorrow so if you are interested please send an offer in

I had almost the same setup as BimmerChris: 437s with 12/10mm spacers and didn't experience any rub or grinding. I also have EDC and these worked just fine with it.

One more picture with an almost matching Clownshoe.

[ShoNufff]

Still have them or are they sold?

[Redacre]

SOLD!