9-Second Part Out

[TPG Tuning]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

In preparation for our next project we are beginning the disassembly and part out of our BMW M4. All parts are used and are sold AS IS. We can disclose any blemishes or defect in the pieces however the prices will reflect if something isn't perfect.

All prices are OBO. Cash, check , credit card, wire transfer is accepted. Paypal is also accepted however the buyer must include paypal fees in purchase price. Shipping is available for all parts at additional costs.

More parts to be added at a later date. Pictures can be provided as parts are removed and packaged. If you have any questions let me know!

TPG Built S55 Long Block w/ Ported Race Head. Motor currently being checked over / refreshed before shipping to insure perfect working order. We will take a deposit to hold motor and once give the "OK" from machine shop the remainder will be due before shipping - $10,000.00 + Good Core

Pure Turbos Stage 2 Hi Flow - $3,000.00 + Good Core - SOLD

TPG Race Exhaust ( Proto-type, Not perfect but works well.) True dual 3" from the downpipes back. Extremely loud. No returns. - $1,000.00

TPG DSS Rear Axles - $800.00 + Good Cores.

Burger Tuning Intakes - $250.00

Weld RTS Wheels W/ Mickey Thompson Slicks - $600.00 - SOLD

Bolt On Parachute Mount Kit W/ Release Handle - $850.00

S55 JB4 W/ Bluetooth - $500.00 - SOLD

Burger Tuning Charge Pipes - $250.00

Proto-type S55 Single Turbo Hot Parts Kit. This is a hot parts kit there will be additional parts needed. Message for details. - $3,000.00

Burger Tuning Aluminum Exhaust - $600.00

AEM Methanol Kit - $250.00

Fuel-It N55 PI Spacer. Will need to piece together a DIY kit from Fuel-It. Can be used on F8X if you modify the HPFP line. - $375.00

View post on imgur.com

[FriedPiston]

GLWS, that's a lot of goodies at very reasonable prices!

Thank you for all the hard work in pushing the limits on the F8x platform!

[Sultanmk]

Do the Welds fit fine? Or do you have to modify something for them to fit?

[rph_gunner]

Is the BMS exhaust full catback or axleback?

[FriedPiston]

Originally Posted by Sultanmk

Do the Welds fit fine? Or do you have to modify something for them to fit?

Just FYI, you're going to need the DSS axles if you're planning on running full slicks.

[TPG Tuning]

Originally Posted by rph_gunner

Is the BMS exhaust full catback or axleback?

Full Catback. It needed some modifying when we received it. It also has the billet tips on it.

[TX PETE]

Does it still need to be modified or is the fitment good now?

Originally Posted by TPG Tuning

Full Catback. It needed some modifying when we received it. It also has the billet tips on it.

[Sultanmk]

Originally Posted by nars3000

Just FYI, you're going to need the DSS axles if you're planning on running full slicks.

I already have DSS axles. I'm asking about the fitment because if the Welds are 17's I don't think they'll fit that easily.

[TPG Tuning]

Originally Posted by TX PETE

Does it still need to be modified or is the fitment good now?

Fitment is great now. We had this on our car for probably 600 miles before setting it up for track use again and it hasn't been back on since.

[TPG Tuning]

Turbos Sold

[F80_M]

Originally Posted by Sultanmk

I already have DSS axles. I'm asking about the fitment because if the Welds are 17's I don't think they'll fit that easily.

Originally Posted by TPG Tuning

In preparation for our next project we are beginning the disassembly and part out of our BMW M4. All parts are used and are sold AS IS. We can disclose any blemishes or defect in the pieces however the prices will reflect if something isn't perfect.

All prices are OBO. Cash, check , credit card, wire transfer is accepted. Paypal is also accepted however the buyer must include paypal fees in purchase price. Shipping is available for all parts at additional costs.

More parts to be added at a later date. Pictures can be provided as parts are removed and packaged. If you have any questions let me know!

TPG Built S55 Long Block w/ Ported Race Head. Motor currently being checked over / refreshed before shipping to insure perfect working order. We will take a deposit to hold motor and once give the "OK" from machine shop the remainder will be due before shipping - $10,000.00 + Good Core

Pure Turbos Stage 2 Hi Flow - $3,000.00 + Good Core - SOLD

TPG Race Exhaust ( Proto-type, Not perfect but works well.) True dual 3" from the downpipes back. Extremely loud. No returns. - $1,000.00

TPG DSS Rear Axles - $800.00 + Good Cores.

Burger Tuning Intakes - $250.00

Weld RTS Wheels W/ Mickey Thompson Slicks - $600.00 - SOLD

Bolt On Parachute Mount Kit W/ Release Handle - $850.00

S55 JB4 W/ Bluetooth - $500.00 - SOLD

Burger Tuning Charge Pipes - $250.00

Proto-type S55 Single Turbo Hot Parts Kit. This is a hot parts kit there will be additional parts needed. Message for details. - $3,000.00

Burger Tuning Aluminum Exhaust - $600.00

AEM Methanol Kit - $250.00

Fuel-It N55 PI Spacer. Will need to piece together a DIY kit from Fuel-It. Can be used on F8X if you modify the HPFP line. - $375.00

View post on imgur.com

Originally Posted by Sultanmk

I already have DSS axles. I'm asking about the fitment because if the Welds are 17's I don't think they'll fit that easily.

One day you'll get an answer on the wheels :

[Barone///M]

i pm'ed you about burger stuff

[BayAreaF80]

Fitment is okay on the race exhaust? Will it fit an f80 m3? Very interested!

[Mikecom32]

Are you guys moving away from the F8x platform?

I was hoping to see some more stuff coming out, since I'm local to you.

GLWS!

[madnessm4]

pm'd !

[GlazierGlaze]

I'll take charge pipes if available.

[GokuSS4]

Do the axles fit f80 m3?

[razy]

Are the chargepipes still available? Condition? Are they the black BMS ones? Thanks!

[24k-m4]

Still have the intakes??

[Defense]

I pmd you for the intakes.

[FattyF80]

Originally Posted by TPG Tuning

In preparation for our next project we are beginning the disassembly and part out of our BMW M4. All parts are used and are sold AS IS. We can disclose any blemishes or defect in the pieces however the prices will reflect if something isn't perfect.

All prices are OBO. Cash, check , credit card, wire transfer is accepted. Paypal is also accepted however the buyer must include paypal fees in purchase price. Shipping is available for all parts at additional costs.

More parts to be added at a later date. Pictures can be provided as parts are removed and packaged. If you have any questions let me know!

TPG Built S55 Long Block w/ Ported Race Head. Motor currently being checked over / refreshed before shipping to insure perfect working order. We will take a deposit to hold motor and once give the "OK" from machine shop the remainder will be due before shipping - $10,000.00 + Good Core

Pure Turbos Stage 2 Hi Flow - $3,000.00 + Good Core - SOLD

TPG Race Exhaust ( Proto-type, Not perfect but works well.) True dual 3" from the downpipes back. Extremely loud. No returns. - $1,000.00

TPG DSS Rear Axles - $800.00 + Good Cores.

Burger Tuning Intakes - $250.00

Weld RTS Wheels W/ Mickey Thompson Slicks - $600.00 - SOLD

Bolt On Parachute Mount Kit W/ Release Handle - $850.00

S55 JB4 W/ Bluetooth - $500.00 - SOLD

Burger Tuning Charge Pipes - $250.00

Proto-type S55 Single Turbo Hot Parts Kit. This is a hot parts kit there will be additional parts needed. Message for details. - $3,000.00

Burger Tuning Aluminum Exhaust - $600.00

AEM Methanol Kit - $250.00

Fuel-It N55 PI Spacer. Will need to piece together a DIY kit from Fuel-It. Can be used on F8X if you modify the HPFP line. - $375.00

View post on imgur.com

So you still have the axles?

[m2cWW]

Hey! What sort of methanol kit is it?