Coding out Airbag and Seat belt warning and dash lights

[Russell263]

Has anyone successfully removed the airbag and seat belt warnings on the iDrive screen and the airbag and seat belt icons on the dash?

After installing aftermarket seats, we tried to code these warnings out without any luck.

There are multiple places that we think could be causing the error codes to come up but after deactivating many of them all errors are still present.

Any help would be appreciated

[bb1857]

Yup did it on mine the other night and it worked perfect.

ACSM Module

SeatBelt Reminder Lights OFF: set all to nicht_aktiv – werte=00
3000→Gurtzustandsanzeige_Beifahrer_GFW_GZA_BF
3000→Gurtzustandsanzeige_Fahrer_GFW_GZA_FA

Turn Off Seat-Belt Reminder Chimes:
3000 → SeatBeltReminder_SBR_Fahrer = nicht_aktiv
3000 → SeatBeltReminder_SBR_Beifahrer = nicht_aktiv

Edit* I only did the seatbelt warnings and lights not the airbags. Sorry about that

[banff]

That will get the warnings but not the airbag.

If you did the passenger seat you will need to code out the occupancy sensor as well.

[Russell263]

Originally Posted by bb1857

Yup did it on mine the other night and it worked perfect.

ACSM Module

SeatBelt Reminder Lights OFF: set all to nicht_aktiv – werte=00
3000→Gurtzustandsanzeige_Beifahrer_GFW_GZA_BF
3000→Gurtzustandsanzeige_Fahrer_GFW_GZA_FA

Turn Off Seat-Belt Reminder Chimes:
3000 → SeatBeltReminder_SBR_Fahrer = nicht_aktiv
3000 → SeatBeltReminder_SBR_Beifahrer = nicht_aktiv

Edit* I only did the seatbelt warnings and lights not the airbags. Sorry about that

Thanks for the help

We did try both of these with no luck. I did not have any warning chimes going off before hand either.

We poked around for a while and tried a lot of different things (I was just observing so I am not positive on the specific wording of what we tried)