PRICE DROP - FS: Vorshlag Camber Plates for E9x M3 or E82 1M running OEM springs

jphughan · 10-26-2015, 02:07 PM

BIMMERPOST / Classifieds

Asking Price:

Sold

Or Best Offer

Location:

✓ Will Ship

Item Interest

Selling my set of Vorshlag Adjustable Camber Plates for E9x M3s and E82 1Ms with stock springs. They work with both EDC and non-EDC cars, but probably not with cars that have aftermarket springs or coilovers. Vorshlag can make a perch that will adapt this set of plates to your aftermarket setup if you're able to supply certain measurements, but that would obviously be additional cost and complexity. They also note that they MAY work with some lowering springs and coilovers, but since I am not a camber plate expert, I recommend calling them if you have any fitment questions before buying from me.

With these plates installed on my M3 with otherwise completely stock EDC suspension, my camber adjustment range was about -1.3 to -2.8. Unlike some other camber plates, these did not change ride height at all and made ZERO noise while I had them installed, although achieving the latter requires that they be installed properly, which includes buzzing the top nut with an air impact gun rather than an electric gun or hand tools -- Vorshlag stresses this in their instructions.

Here's Vorshlag's product page for more info: http://www.vorshlag.com/product_info...roducts_id=535.

Had them installed on my car for ~2.5 years and a little over 20K miles. Located in North Austin.

jphughan · 11-03-2015, 01:27 AM

Bump

Leglessracing · 11-04-2015, 05:36 PM

Got any pics?

jphughan · 11-04-2015, 05:38 PM

Quote:

Originally Posted by Leglessracing

Got any pics?

Not at the moment, didn't really think they were necessary for something like this. They look just like the much better photographed plates you can see on the product page except not as shiny. Is there some particular aspect of my example you want to see?

Leglessracing · 11-05-2015, 05:26 AM

Oh ok, I would like to see what is actually for sale before offering if that's ok? I've been burnt before so I'm extra cautious and get pics now. I hope that's ok?

jphughan · 11-05-2015, 07:38 AM

Quote:

Originally Posted by Leglessracing

Oh ok, I would like to see what is actually for sale before offering if that's ok? I've been burnt before so I'm extra cautious and get pics now. I hope that's ok?

Fair enough. Here you go. I'll also include some instructions that came from Vorshlag's site but that I've improved on based on a little bit (clarifications, emphasis, etc).

Name: IMG_1621.JPG
Views: 350
Size: 463.5 KB

Name: IMG_1621.JPG
Views: 350
Size: 463.5 KB

Name: IMG_1623.JPG
Views: 364
Size: 552.5 KB

Name: IMG_1622.JPG
Views: 352
Size: 442.6 KB

jphughan · 11-09-2015, 07:53 PM

Bump

jphughan · 11-16-2015, 02:36 PM

Bump

jphughan · 11-24-2015, 06:09 PM

Bump

10-26-2015, 02:07 PM	#1
jphughan Brigadier General 594 Rep 4,488 Posts Drives: '16 Cayman GT4 Join Date: Mar 2011 Location: Austin, TX iTrader: (0)	PRICE DROP - FS: Vorshlag Camber Plates for E9x M3 or E82 1M running OEM springs BIMMERPOST / Classifieds Asking Price: Sold Or Best Offer Location: ✓ Will Ship Item Interest Selling my set of Vorshlag Adjustable Camber Plates for E9x M3s and E82 1Ms with stock springs. They work with both EDC and non-EDC cars, but probably not with cars that have aftermarket springs or coilovers. Vorshlag can make a perch that will adapt this set of plates to your aftermarket setup if you're able to supply certain measurements, but that would obviously be additional cost and complexity. They also note that they MAY work with some lowering springs and coilovers, but since I am not a camber plate expert, I recommend calling them if you have any fitment questions before buying from me. With these plates installed on my M3 with otherwise completely stock EDC suspension, my camber adjustment range was about -1.3 to -2.8. Unlike some other camber plates, these did not change ride height at all and made ZERO noise while I had them installed, although achieving the latter requires that they be installed properly, which includes buzzing the top nut with an air impact gun rather than an electric gun or hand tools -- Vorshlag stresses this in their instructions. Here's Vorshlag's product page for more info: http://www.vorshlag.com/product_info...roducts_id=535. Had them installed on my car for ~2.5 years and a little over 20K miles. Located in North Austin. __________________ '16 Cayman GT4 (delivery pics, comparison to E92 M3 write-up) Gone but not forgotten: '11.75 M3 E92 Le Mans \| Black Nov w/ Alum \| 6MT (owned 5/2011 - 11/2015) Last edited by jphughan; 11-25-2015 at 12:10 PM..
	Appreciate 0 Tweet Quote

11-03-2015, 01:27 AM	#2
jphughan Brigadier General 594 Rep 4,488 Posts Drives: '16 Cayman GT4 Join Date: Mar 2011 Location: Austin, TX iTrader: (0)	Bump __________________ '16 Cayman GT4 (delivery pics, comparison to E92 M3 write-up) Gone but not forgotten: '11.75 M3 E92 Le Mans \| Black Nov w/ Alum \| 6MT (owned 5/2011 - 11/2015)
	Appreciate 0 Quote

11-04-2015, 05:36 PM	#3
Leglessracing Lieutenant 121 Rep 551 Posts Drives: M3 E92 Join Date: Jan 2015 Location: Cider muncher iTrader: (3)	Got any pics?
	Appreciate 0 Quote

11-05-2015, 05:26 AM	#5
Leglessracing Lieutenant 121 Rep 551 Posts Drives: M3 E92 Join Date: Jan 2015 Location: Cider muncher iTrader: (3)	Oh ok, I would like to see what is actually for sale before offering if that's ok? I've been burnt before so I'm extra cautious and get pics now. I hope that's ok?
	Appreciate 0 Quote

11-09-2015, 07:53 PM	#7
jphughan Brigadier General 594 Rep 4,488 Posts Drives: '16 Cayman GT4 Join Date: Mar 2011 Location: Austin, TX iTrader: (0)	Bump __________________ '16 Cayman GT4 (delivery pics, comparison to E92 M3 write-up) Gone but not forgotten: '11.75 M3 E92 Le Mans \| Black Nov w/ Alum \| 6MT (owned 5/2011 - 11/2015)
	Appreciate 0 Quote

11-16-2015, 02:36 PM	#8
jphughan Brigadier General 594 Rep 4,488 Posts Drives: '16 Cayman GT4 Join Date: Mar 2011 Location: Austin, TX iTrader: (0)	Bump __________________ '16 Cayman GT4 (delivery pics, comparison to E92 M3 write-up) Gone but not forgotten: '11.75 M3 E92 Le Mans \| Black Nov w/ Alum \| 6MT (owned 5/2011 - 11/2015)
	Appreciate 0 Quote

11-24-2015, 06:09 PM	#9
jphughan Brigadier General 594 Rep 4,488 Posts Drives: '16 Cayman GT4 Join Date: Mar 2011 Location: Austin, TX iTrader: (0)	Bump __________________ '16 Cayman GT4 (delivery pics, comparison to E92 M3 write-up) Gone but not forgotten: '11.75 M3 E92 Le Mans \| Black Nov w/ Alum \| 6MT (owned 5/2011 - 11/2015)
	Appreciate 0 Quote