7th Gear Pull on Dynapack

Richy Rich · 03-16-2015, 01:00 PM

Only dyno I can find available today around 12-1 is a dynapack, I know a 7th gear pull on a dynojet will allow me to see if speed limiter is removed or not.

Will this work with a dynapack also, being a hub vs roller?

Don't really want to waste the time if not.

tom @ eas · 03-16-2015, 01:08 PM

Quote:

Originally Posted by Richy Rich

Only dyno I can find available today around 12-1 is a dynapack, I know a 7th gear pull on a dynojet will allow me to see if speed limiter is removed or not.

Will this work with a dynapack also, being a hub vs roller?

Don't really want to waste the time if not.

Dynapacks seem to have a really hard time dynoing JB4-equipped cars when loaded up causing in all sorts of misfires, we saw this at the last European Car Challenge dyno event at Church. It might work if all you're looking to do is see if the speed limiter has been removed.

Your best bet is a chassis dyno, but make sure to ask the operator if their dyno is capable of reaching those speeds safely beforehand.

Richy Rich · 03-16-2015, 01:09 PM

Quote:

Originally Posted by tom @ eas

Dynapacks seem to have a really hard time dynoing JB4-equipped cars when loaded up causing in all sorts of misfires, we saw this at the last European Car Challenge dyno event at Church. It might work if all you're looking to do is see if the speed limiter has been removed.

Your best bet is a chassis dyno, but make sure to ask the operator if their dyno is capable of reaching those speeds safely beforehand.

So in other words, I need to stop being lazy make the hour and a half drive to EAS? Lol

Green-Eggs · 03-16-2015, 01:20 PM

On a dynapack, I have seen speeds close to 200mph on a 1300whp+ GT-R

Vectors2final · 03-16-2015, 10:36 PM

Quote:

Originally Posted by Richy Rich

So in other words, I need to stop being lazy make the hour and a half drive to EAS? Lol

Pretty much.

NorCal f80 · 03-16-2015, 10:43 PM

Quote:

Originally Posted by tom @ eas

Dynapacks seem to have a really hard time dynoing JB4-equipped cars when loaded up causing in all sorts of misfires, we saw this at the last European Car Challenge dyno event at Church. It might work if all you're looking to do is see if the speed limiter has been removed.

Your best bet is a chassis dyno, but make sure to ask the operator if their dyno is capable of reaching those speeds safely beforehand.

Tom are you guys not installing or selling JB4 anymore?

Vectors2final · 03-16-2015, 10:44 PM

I don't think so... there's a thread for that somewhere around here.

03-16-2015, 01:00 PM	#1
Richy Rich Colonel 3169 Rep 2,135 Posts Drives: F80 \| MKIV Supra \| Aventador S Join Date: Jan 2014 Location: Los Angeles iTrader: (0)	7th Gear Pull on Dynapack Only dyno I can find available today around 12-1 is a dynapack, I know a 7th gear pull on a dynojet will allow me to see if speed limiter is removed or not. Will this work with a dynapack also, being a hub vs roller? Don't really want to waste the time if not. __________________ For Sale: 2017 740whp Frozen White M3 \| 5900 Miles [sold] 'GR3MLIN' - Satin Mineral Grey M3 Build Thread
	Appreciate 0 Tweet Quote

03-16-2015, 01:20 PM	#4
Green-Eggs Lieutenant Colonel 1440 Rep 1,614 Posts Drives: BMW Join Date: Jul 2007 Location: Los Angeles iTrader: (3)	On a dynapack, I have seen speeds close to 200mph on a 1300whp+ GT-R
	Appreciate 0 Quote

03-16-2015, 10:44 PM	#7
Vectors2final Brigadier General 1405 Rep 3,365 Posts Drives: 2018 F80 YMB/SS ZCP Join Date: May 2011 Location: Austin, Tx iTrader: (0)	I don't think so... there's a thread for that somewhere around here. __________________ 2019 Ruby GT350 - Gen 5 Whipple on corn making 855RWHP. Sold: 2018 F80 Part Deux /DCT /YMB /Full SS /CF Trim /ZCP /ZEC w/Black 666M Sold: 2015 F80 /DCT /YMB /Full SS /CF Trim /ZEC /ZLP /HK /S&TVC- 18''///M
	Appreciate 0 Quote