[4cfd bmr]

So about 2 weeks ago I had the opportunity to go visit Josh at CP-E in Beltsville, MD and meet him and the rest of the engineers at CP-E to see what they were all about. For those of you that don't know, CP-E is huge in the Mazda speed series aftermarket [Mazdaspeed 3, Mazdaspeed6, and even the CX-7(turbo)] producing high quality intakes, intercoolers, exhausts, and intercooler piping and most notably their StandBack software. They're even bidding to take over Racing Beat who is Mazda USA's aftermarket manufacturer to give you an idea of they're OEM fitment and quality.

On to the good news for us BMW (more specifically 335i) owners. They needed a prototype for the 335i coupes so I volunteered my car and below you'll see the results of their prototype exhaust - The quality is unparalelled to any exhaust I've seen yet on the forums. The fitment is perfect and the exhaust note is a nice deep smooth tone. I'll have videos/soundclips when the production exhaust gets fitted. These guys are no joke and have a lot instore for the 335i. Anyway on to the pictures from their shop and of the exhaust.

The CNC machine


Some post-production CNC'd MAF housings for Mazdaspeed 3 (i think)


Some post-production CNC'd 335 throttle body adapters


Their welder hand welding a CX-7 exhaust in their exhaust jig/template


Stock 335i exhaust off the car


CP-E Exhaust bolted up to the downpipes (notice it still fits all of the stock mounting points through out the whole exhaust - with no modification)



All exhaust joints fit together (no flanges) and will clamp together


Exhaust under rear axles


Before (stock under car)


After (CP-E under car)


Rear Shots




All piping on the CP-E exhaust will be 2.5" stainless mandrel-bent piping with two hand welded CP-E mufflers.

When I spoke with Josh he mentioned that the MSRP will be in the $1800 area and he will be offering an introductory price signifcantly lower for the first few production runs. All in all I was very impressed with the shop and their attention to detail and quality. Their website so you can take a preliminary look is www.cp-e.com

He also told me that they plan to produce BOV pipes which utilize the stock throttle body coupling and fit perfectly with the stock piping that goes to the intercooler. He said they plan to use Tial and HKS SSQV blow off valve flanges. Additionally they are developing their StandBack software which will have user-configurability through a USB interface. I met the lead software programmer and he is currently developing all of the StandBack programming. Lastly, I believe they're also going to develop an intercooler as well.

[Fubarsky]

Nice thanks for sharing, interested in the sound clips. Looks like a clean install. I am interested in upgrading my exhaust but definetly don't want a buzzing drone sound while doing long hwy trips.

[Garrett]

Originally Posted by bora1point8t

So about 2 weeks ago I had the opportunity to go visit Josh at CP-E in Beltsville, MD and meet him and the rest of the engineers at CP-E to see what they were all about. For those of you that don't know, CP-E is huge in the Mazda speed series aftermarket [Mazdaspeed 3, Mazdaspeed6, and even the CX-7(turbo)] producing high quality intakes, intercoolers, exhausts, and intercooler piping and most notably their StandBack software. They're even bidding to take over Racing Beat who is Mazda USA's aftermarket manufacturer to give you an idea of they're OEM fitment and quality.

On to the good news for us BMW (more specifically 335i) owners. They needed a prototype for the 335i coupes so I volunteered my car and below you'll see the results of their prototype exhaust - The quality is unparalelled to any exhaust I've seen yet on the forums. The fitment is perfect and the exhaust note is a nice deep smooth tone. I'll have videos/soundclips when the production exhaust gets fitted. These guys are no joke and have a lot instore for the 335i. Anyway on to the pictures from their shop and of the exhaust.

The CNC machine


Some post-production CNC'd MAF housings for Mazdaspeed 3 (i think)


Some post-production CNC'd 335 throttle body adapters


Their welder hand welding a CX-7 exhaust in their exhaust jig/template


Stock 335i exhaust off the car


CP-E Exhaust bolted up to the downpipes (notice it still fits all of the stock mounting points through out the whole exhaust - with no modification)



All exhaust joints fit together (no flanges) and will clamp together


Exhaust under rear axles


Before (stock under car)


After (CP-E under car)


Rear Shots




All piping on the CP-E exhaust will be 2.5" stainless mandrel-bent piping with two hand welded CP-E mufflers.

When I spoke with Josh he mentioned that the MSRP will be in the $1800 area and he will be offering an introductory price signifcantly lower for the first few production runs. All in all I was very impressed with the shop and their attention to detail and quality. Their website so you can take a preliminary look is www.cp-e.com

He also told me that they plan to produce BOV pipes which utilize the stock throttle body coupling and fit perfectly with the stock piping that goes to the intercooler. He said they plan to use Tial and HKS SSQV blow off valve flanges. Additionally they are developing their StandBack software which will have user-configurability through a USB interface. I met the lead software programmer and he is currently developing all of the StandBack programming. Lastly, I believe they're also going to develop an intercooler as well.

wha..

This is the funnies thread I've ever seen.. is this a joke..?





-Garrett

[Swoop]

Looks great!!! I can't wait for mine to go on.......

[Swoop]

Originally Posted by Fubarsky

Nice thanks for sharing, interested in the sound clips. Looks like a clean install. I am interested in upgrading my exhaust but definetly don't want a buzzing drone sound while doing long hwy trips.

NO DRONE!!!! at least from the e90 exhaust!!!

[Mr. 5]

Originally Posted by Garrett

wha..

This is the funnies thread I've ever seen.. is this a joke..?





-Garrett

Why is this funny? Am I missing something?

[Swoop]

Originally Posted by Garrett

wha..

This is the funnies thread I've ever seen.. is this a joke..?





-Garrett

Huh??? did you have a retard sandwich for breakfast? Why would you think it's a joke???

[Sniz]

I see no photos

[LKNDC]

sound clips? and
needs better rear pics.

[ADHD]

want e90 prototype pics not e92

[Swoop]

Originally Posted by ADHD

want e90 prototype pics not e92

Hey Tyler,

I had some pics of it installed on my car awhile back...here are a couple
i promise you would love the way it looks and the sound...

http://www.e90post.com/forums/showth...highlight=cp-e

http://www.e90post.com/forums/showth...highlight=cp-e

http://www.e90post.com/forums/showth...highlight=cp-e

http://www.e90post.com/forums/showth...highlight=cp-e

[4cfd bmr]

Originally Posted by Garrett

wha..

This is the funnies thread I've ever seen.. is this a joke..?





-Garrett

Whats so funny about it?

If I had the exhaust on the car still there would be videos/soundclips but that was the original prototype and it hasn't been produced yet.

[dinkoh]

Originally Posted by ADHD

want e90 prototype pics not e92

I believe they are the same. No difference in design, and fits both perfectly.

[4cfd bmr]

Sidenote:
i'm wondering why they moved this thread from the 335i engine tuning forum to the engine (NA) drivetrain, exhaust forum??? Correct me if i'm wrong, but isn't that for 325,328,330 (naturally aspirated BMWs)??

[dinkoh]

Originally Posted by bora1point8t

Sidenote:
i'm wondering why they moved this thread from the 335i engine tuning forum to the engine (NA) drivetrain, exhaust forum??? Correct me if i'm wrong, but isn't that for 325,328,330 (naturally aspirated BMWs)??

Nah, it was the right move. Your post is about the CP-E EXHAUST. So, it's in the "Under the Hood (NA-Engine) / Drivetrain / Exhaust Modifications" forum.

[judec]

Originally Posted by Garrett

wha..

This is the funnies thread I've ever seen.. is this a joke..?





-Garrett

This is definitely one of the dumbest replies I've seen here. Why? So:
- nothing funny in the thread, just pure info with pics
- I know a few jokes, this is absolutely not like a joke
- how can U be so lame to put the whole post including all pictures in the quote?

I've seen some posts regarding your lame replies, maybe I also made some by myself before, but I have to repost it: Garrett - the turbo manufacturer - should sue U for misusing and ashaming his name.

[judec]

Well, having a player like CP-E in the ring is a great thing. Really looking forward to see/hear it.

Thx for info, great thread/post

[Kiemyster]

Originally Posted by Garrett

wha..

This is the funnies thread I've ever seen.. is this a joke..?





-Garrett

maybe hes taling about jap tuning on a euro car? thats the only thing i could think of....

[andrewflk]

Have any production versions been released yet?

[4cfd bmr]

I just spoke with Josh from CP-E today and the latest word from him is that they have 15 exhausts ready for shipment post-SEMA (10/29-11/4). I believe these are for E92 coupes they may also compatible on the E90 sedan as well - don't quote me on that. He said there are already 4 of the 15 first production exhausts spoken for. I'm not certain on the 'introductory pricing' but he also let on that the CP-E StandBack ECU should be completed and ready for vehicle testing in about 3 weeks. I'll try and keep you guys posted. For those looking for soundclips go to their website here --> http://www.cp-e.com/2043.html and they have a couple soundclips to hold you over for now.

[dinkoh]

Originally Posted by bora1point8t

I just spoke with Josh from CP-E today and the latest word from him is that they have 15 exhausts ready for shipment post-SEMA (10/29-11/4). I believe these are for E92 coupes they may also compatible on the E90 sedan as well - don't quote me on that. He said there are already 4 of the 15 first production exhausts spoken for. I'm not certain on the 'introductory pricing' but he also let on that the CP-E StandBack ECU should be completed and ready for vehicle testing in about 3 weeks. I'll try and keep you guys posted. For those looking for soundclips go to their website here --> http://www.cp-e.com/2043.html and they have a couple soundclips to hold you over for now.

Swoop's car!

[Swoop]

Thanks, Dink.....Oh, I can't wait.......