Im gonna give you the gun...

schneid4323 · 09-27-2007, 08:50 PM

.... you do the rest

Govoner Removal on a Procede:
Wire the speed sensor into the harness
To digital input 3
Hopefully you can figure out the output lol

Heres what you are gonna need to figure out how to do this:
A haltech or RD Sport Black Box manual, to figure out which is digital input 3
A diagram of the DME to figure out which wire is the speed sensor

I figure the group of you that figures it out, deserve it, I've done it and tested it, it works.

zenmaster · 09-27-2007, 08:54 PM

Is this all you need: http://www.haltech.com.au/downloads/...tor_mainv5.pdf
?

Beer Goggles · 09-27-2007, 08:55 PM

Why would you want to remove the rev limiter?

satinghostrider · 09-27-2007, 08:58 PM

Does cylinder 5 and 6 overheat ? Its a known issue with Vmax.

WilyB · 09-27-2007, 09:00 PM

Quote:

Originally Posted by elmariachi

Does cylinder 5 and 6 overheat ? Its a known issue with Vmax.

Any road in SG where you may sustain max speed?

Beer Goggles · 09-27-2007, 09:01 PM

Oh, I think I read that wrong. Realistically you never will go that fast. I went 150mph in my 350Z once, and that's good enough for my curiosity of how that felt.

schneid4323 · 09-27-2007, 09:03 PM

Quote:

Originally Posted by zenmaster

Is this all you need: http://www.haltech.com.au/downloads/...tor_mainv5.pdf
?

somebody is on the right track.

zenmaster · 09-27-2007, 09:09 PM

BTW, is it possible to simply make the speed sensor provide a more accurate reading through the PROcede? i.e. have PROcede calibrate it.

satinghostrider · 09-27-2007, 09:21 PM

Quote:

Originally Posted by WilyB

Any road in SG where you may sustain max speed?

Not in Singapore but driving up to Malaysia on North South Highway, Vmax is more than sustainable not to mention if you do get caught, its easily solved.

sflgator · 09-27-2007, 09:48 PM

I get the feeling that this will be a very popular thread...not sure if that's good or bad.

btw -- where can someone get a diagram of the BMW 335i DME?

Bubbles · 09-27-2007, 09:49 PM

WOW!!!!!NICE!!!

schneid4323 · 09-27-2007, 11:32 PM

Quote:

Originally Posted by sflgator

I get the feeling that this will be a very popular thread...not sure if that's good or bad.

btw -- where can someone get a diagram of the BMW 335i DME?

Ebay maybe.... Terry maybe... Thats the fun part

CrazyHohol · 09-27-2007, 11:36 PM

Quote:

Originally Posted by elmariachi

Not in Singapore but driving up to Malaysia on North South Highway, Vmax is more than sustainable not to mention if you do get caught, its easily solved.

ahh this is what i love about driving in ukraine or russia when im there. (even though the roads are really shitty)

Jonmartin · 09-27-2007, 11:51 PM

Do you have to program it through software or is simply adding the wire to the right location?

schneid4323 · 09-27-2007, 11:59 PM

Quote:

Originally Posted by Jonmartin

Do you have to program it through software or is simply adding the wire to the right location?

Simply wire it up. I may take apart my car sunday if i get bored, if so ill try to do a write up, but also we should respect shivs decission to let people find out for themselves.

533ogetnom · 09-28-2007, 12:26 AM

i wonder if you could go to court and be like "but judge the car only goes 155 no way could i have been going 170"

335iheLLraiseR · 09-28-2007, 12:45 AM

Quote:

Originally Posted by schneid4323

.... you do the rest

Govoner Removal on a Procede:
Wire the speed sensor into the harness
To digital input 3
Hopefully you can figure out the output lol

Heres what you are gonna need to figure out how to do this:
A haltech or RD Sport Black Box manual, to figure out which is digital input 3
A diagram of the DME to figure out which wire is the speed sensor

I figure the group of you that figures it out, deserve it, I've done it and tested it, it works.

Quote:

Originally Posted by schneid4323

Ebay maybe.... Terry maybe... Thats the fun part

ballzy schneid, real ballzy.....

you know Terrys inbox is gonna blow up.....

now, WTF is the DME?

schneid4323 · 09-28-2007, 01:20 AM

Quote:

Originally Posted by 335iheLLraiseR

now, WTF is the DME?

ECU

335iheLLraiseR · 09-28-2007, 01:27 AM

Quote:

Originally Posted by schneid4323

ECU

i knew that.....

335iheLLraiseR · 09-28-2007, 01:31 AM

i thought this was supposed to be more complicated.....Shiv said something about needing 2 dig in and 2 dig out. Your way sounds like its just bypassing the governor, but the car is still gonna know that you went past 155...

i'm not criticizing, just need some more info.

schneid4323 · 09-28-2007, 01:34 AM

Quote:

Originally Posted by 335iheLLraiseR

i thought this was supposed to be more complicated.....Shiv said something about needing 2 dig in and 2 dig out. Your way sounds like its just bypassing the governor, but the car is still gonna know that you went past 155...

i'm not criticizing, just need some more info.

No it wont record it, but you will get it on the speedo.

schneid4323 · 09-28-2007, 01:35 AM

You will need the RD Sport Black Box manual to figure out where on the DME to wire it.

09-27-2007, 08:50 PM	#1
schneid4323 Banned 330 Rep 1,134 Posts Drives: 335i, M6 Join Date: Dec 2006 Location: Dallas TX iTrader: (0)	Im gonna give you the gun... .... you do the rest Govoner Removal on a Procede: Wire the speed sensor into the harness To digital input 3 Hopefully you can figure out the output lol Heres what you are gonna need to figure out how to do this: A haltech or RD Sport Black Box manual, to figure out which is digital input 3 A diagram of the DME to figure out which wire is the speed sensor I figure the group of you that figures it out, deserve it, I've done it and tested it, it works.
	Appreciate 0 Tweet Quote

09-27-2007, 08:54 PM	#2
zenmaster Brigadier General 1577 Rep 3,888 Posts Drives: '17 M2 Join Date: Mar 2007 Location: Atlanta iTrader: (1)	Is this all you need: http://www.haltech.com.au/downloads/...tor_mainv5.pdf ? Last edited by zenmaster; 09-27-2007 at 09:00 PM.. Reason: ah, need ecu diagram
	Appreciate 0 Quote

09-27-2007, 08:55 PM	#3
Beer Goggles First Lieutenant 6 Rep 310 Posts Drives: 2007 335i E92, 6MT, Sport Join Date: Aug 2007 Location: Riverside, CA iTrader: (0)	Why would you want to remove the rev limiter?
	Appreciate 0 Quote

09-27-2007, 08:58 PM	#4
satinghostrider Major 178 Rep 1,432 Posts Drives: 2018 F80 M3 ZCP LCI II Join Date: Jan 2007 Location: Singapore iTrader: (1)	Does cylinder 5 and 6 overheat ? Its a known issue with Vmax.
	Appreciate 0 Quote

09-27-2007, 09:01 PM	#6
Beer Goggles First Lieutenant 6 Rep 310 Posts Drives: 2007 335i E92, 6MT, Sport Join Date: Aug 2007 Location: Riverside, CA iTrader: (0)	Oh, I think I read that wrong. Realistically you never will go that fast. I went 150mph in my 350Z once, and that's good enough for my curiosity of how that felt.
	Appreciate 0 Quote

09-27-2007, 09:09 PM	#8
zenmaster Brigadier General 1577 Rep 3,888 Posts Drives: '17 M2 Join Date: Mar 2007 Location: Atlanta iTrader: (1)	BTW, is it possible to simply make the speed sensor provide a more accurate reading through the PROcede? i.e. have PROcede calibrate it.
	Appreciate 0 Quote

09-27-2007, 09:48 PM	#10
sflgator Major General 148 Rep 5,389 Posts Drives: '09 MB C63 AMG & '08 MB GL450 Join Date: Oct 2006 Location: U.S. iTrader: (1)	I get the feeling that this will be a very popular thread...not sure if that's good or bad. btw -- where can someone get a diagram of the BMW 335i DME? __________________ \|2009 RENNtech MB C63 AMG \| Black/Black Leather/Black Maple \| Premium II \| MultiMedia \| iPod \| \| TeleAid \| Charcoal Filter Delete \| BMC High-Flow Air Filters \| High-Flow Secondary Cats \| Clear Side Markers \|
	Appreciate 0 Quote

09-27-2007, 09:49 PM	#11
Bubbles Brigadier General 2753 Rep 4,445 Posts Drives: Green Bastard Join Date: Jun 2007 Location: Bishop Bend iTrader: (3)	WOW!!!!!NICE!!! __________________
	Appreciate 0 Quote

09-27-2007, 11:51 PM	#14
Jonmartin Banned 123 Rep 2,097 Posts Drives: E90 M3 Join Date: Nov 2005 Location: Los Angles (818) iTrader: (1)	Do you have to program it through software or is simply adding the wire to the right location?
	Appreciate 0 Quote

09-28-2007, 12:26 AM	#16
533ogetnom Banned 95 Rep 1,760 Posts Drives: 335coupe Join Date: Apr 2007 Location: Florida iTrader: (1)	i wonder if you could go to court and be like "but judge the car only goes 155 no way could i have been going 170"
	Appreciate 0 Quote

09-28-2007, 01:35 AM	#22
schneid4323 Banned 330 Rep 1,134 Posts Drives: 335i, M6 Join Date: Dec 2006 Location: Dallas TX iTrader: (0)	You will need the RD Sport Black Box manual to figure out where on the DME to wire it.
	Appreciate 0 Quote