[Bishopbiz]

Need a Good place to get it fixed for cheap.. Near nyc

[nelnelxd]

Originally Posted by Bishopbiz

Need a Good place to get it fixed for cheap.. Near nyc

Hey let me know how much this thing is going to cost you when you find a place. I went to BMW and they want to charge me $1177.57. I am thinking of going to Bay Diagnostic in Brooklyn since it isn't too far from my house.

[e92oholic]

Are you a little handy? Try this:

http://www.e90post.com/forums/showthread.php?t=775317

[BoogeyMan'sBMW]

I have a guy that does good work. PM me for his info

[Bishopbiz]

Originally Posted by BoogeyMan'sBMW

I have a guy that does good work. PM me for his info

Where is he located and how much does he charge

[Bishopbiz]

Originally Posted by BoogeyMan'sBMW

I have a guy that does good work. PM me for his info

Pm me having a hard time pm-ing u

[Torres_335i]

call mnc performance 516.764.4662 ask for alex they give you a good price

[Harmander]

had mine changed at cambertoe, its been good ever since. don't try it yourself unless you really know what you're doing, I tried on my n52 and it was a nightmare. got halfway through and couldn't get certain screws off so I ended up having to just put everything back together and then take it to the shop.

[e92oholic]

Originally Posted by Harmander

had mine changed at cambertoe, its been good ever since. don't try it yourself unless you really know what you're doing, I tried on my n52 and it was a nightmare. got halfway through and couldn't get certain screws off so I ended up having to just put everything back together and then take it to the shop.

N52's are easy! Common do those all day long! You must not have the right tools..

[ac09lude]

Originally Posted by Harmander

had mine changed at cambertoe, its been good ever since. don't try it yourself unless you really know what you're doing, I tried on my n52 and it was a nightmare. got halfway through and couldn't get certain screws off so I ended up having to just put everything back together and then take it to the shop.

How much did CamberToe charge for this?

[Harmander]

Originally Posted by e92oholic

N52's are easy! Common do those all day long! You must not have the right tools..

possibly, but I think it was more likely that some of the screws were just a bitch to get to and there was so much stuff to get out of the way. It was also my first attempt at something as big as replacing the vcg.

[Harmander]

Originally Posted by ac09lude

How much did CamberToe charge for this?

don't remember exactly because I had some other stuff done along with it (alignment, brake fluid flush) but I believe it was in the range of $400-500 maybe?