Don't know much about wheels, help me choose sizes and offset

tjobeid · 05-18-2013, 01:32 AM

Found a set of wheels I like, will this be aggressive enough to look awesome ?

Size : 20x9 (F) 20x10 (R)
Bolt pattern : 5x120
Offset : 20mm (F) 25mm(R)
Hub Bore : 72.6mm
Lip Size : CONCAVE
Finish : BLACK MACHINED FACE
What tires can I run ?

mlifxs · 05-18-2013, 10:09 AM

I'm running 9 up front with 31 offset and -1.1 camber and I don't have much room to spare. I think you will rub up front with this setup. My guess is you'll rub in the back as well.

tjobeid · 05-18-2013, 10:14 AM

I dont mind rolling the fenders. I just want the car to have nice ass hehe. Some wide tires that dont stick out and look stupid.

kjlogan65 · 05-19-2013, 08:23 PM

I had 20x10.5 with 31 offset with 285s and I rubbed a little in the back (E93). There are some good threads on tips to eliminate the rubbing.

tjobeid · 05-19-2013, 09:32 PM

Quote:

Originally Posted by kjlogan65

I had 20x10.5 with 31 offset with 285s and I rubbed a little in the back (E93). There are some good threads on tips to eliminate the rubbing.

You have pictured from back lower end of car?

King809 · 05-20-2013, 12:30 PM

I have an e90 328xi just bough my rims 8.5 for the front and 9.5 for the back but not sure if I cold use 225/35/19 for the front and 255/35/19 on the back any help!!

VMRWheels · 05-20-2013, 02:16 PM

That sizing is more aggressive than we recommend. You may need some fender work to fit those.

Bonifaxio · 05-20-2013, 02:26 PM

I have the same exact question.

I have a 2006 330Xi (xDrive) and i want to get Avant Garde M359 wheels in a staggered setup. I was recommended 19x9 et35 for the front and 19x10 et38 on the rear.
Will this fit properly without mods or spacers?
Will it rub at all???

Note: I'm also lowering my car with H&R 50494 sport springs (1.3" front, 1.2" rear)
I plan or purchasing this week =)
Please help!

05-18-2013, 01:32 AM	#1
tjobeid Banned 54 Rep 558 Posts Drives: 2007 335i coupe Join Date: May 2013 Location: houston,tx iTrader: (1)	Don't know much about wheels, help me choose sizes and offset Found a set of wheels I like, will this be aggressive enough to look awesome ? Size : 20x9 (F) 20x10 (R) Bolt pattern : 5x120 Offset : 20mm (F) 25mm(R) Hub Bore : 72.6mm Lip Size : CONCAVE Finish : BLACK MACHINED FACE What tires can I run ?
	Appreciate 0 Tweet Quote

05-18-2013, 10:09 AM	#2
mlifxs Diamond Geezer 212 Rep 2,385 Posts Drives: Jet Black 2007 328i Saloon Join Date: Nov 2007 Location: Florida iTrader: (6) Garage List 2016 VW Golf Sportw ... [10.00]	I'm running 9 up front with 31 offset and -1.1 camber and I don't have much room to spare. I think you will rub up front with this setup. My guess is you'll rub in the back as well.
	Appreciate 0 Quote

05-18-2013, 10:14 AM	#3
tjobeid Banned 54 Rep 558 Posts Drives: 2007 335i coupe Join Date: May 2013 Location: houston,tx iTrader: (1)	I dont mind rolling the fenders. I just want the car to have nice ass hehe. Some wide tires that dont stick out and look stupid.
	Appreciate 0 Quote

05-19-2013, 08:23 PM	#4
kjlogan65 Private First Class 5 Rep 123 Posts Drives: 2011 335i E93 Sport Join Date: Sep 2012 Location: Houston iTrader: (0)	I had 20x10.5 with 31 offset with 285s and I rubbed a little in the back (E93). There are some good threads on tips to eliminate the rubbing.
	Appreciate 0 Quote

05-20-2013, 12:30 PM	#6
King809 Registered 0 Rep 3 Posts Drives: 2007 328xi Join Date: May 2013 Location: NY iTrader: (0)	Help I have an e90 328xi just bough my rims 8.5 for the front and 9.5 for the back but not sure if I cold use 225/35/19 for the front and 255/35/19 on the back any help!!
	Appreciate 0 Quote

05-20-2013, 02:16 PM	#7
VMRWheels BimmerPost Supporting Vendor 2048 Rep 25,989 Posts Drives: BMW Join Date: Jun 2007 Location: Anaheim, CA iTrader: (4) Garage List 2013 BMW M3 [10.00] 2015 BMW M4 [0.00] 2013 BMW F30 [0.00] 2014 BMW F22 [0.00] 2013 BMW F06 [0.00]	That sizing is more aggressive than we recommend. You may need some fender work to fit those. __________________ VMR\|Wheels \| 714.442.7916 \| sales@velocitymotoring.com \| www.velocitymotoring.com \| facebook \| flickr \| Instagram
	Appreciate 0 Quote

05-20-2013, 02:26 PM	#8
Bonifaxio New Member 1 Rep 21 Posts Drives: 2006 330Xi Sedan Join Date: Sep 2012 Location: Boston, MA iTrader: (0)	I have the same exact question. I have a 2006 330Xi (xDrive) and i want to get Avant Garde M359 wheels in a staggered setup. I was recommended 19x9 et35 for the front and 19x10 et38 on the rear. Will this fit properly without mods or spacers? Will it rub at all??? Note: I'm also lowering my car with H&R 50494 sport springs (1.3" front, 1.2" rear) I plan or purchasing this week =) Please help!
	Appreciate 0 Quote