12-05-2012, 08:59 PM | #1 |
New Member
4
Rep 8
Posts |
H&R Super Sport Front Need Low
Any way to me low a lil more front of H&R Super Sport on F30 328i ? I need only like 2cm to be perfect...I mean front and rear at same low...
Thanks |
02-28-2013, 12:50 AM | #2 |
Private First Class
10
Rep 176
Posts |
I noticed this too with my install, the front sits about a half inch higher than the rear.
sorry for the terrible pic
__________________
2019 Ibis White/Red S4
1997 Nissan Skyline GTR V-SPEC |
Appreciate
0
|
02-28-2013, 05:44 AM | #3 |
Captain
37
Rep 668
Posts |
if it's a 335i then the front will sit lower, almost the same as the rear.
since yours is 328 & the engine is lighter so the front will be higher. the only way to go is to cut the spring (Not Recommended) or get some coilover. |
Appreciate
0
|
02-28-2013, 06:37 AM | #4 |
Private First Class
10
Rep 176
Posts |
Yeah its a 328, I have though about cutting some of the coil to level it out but it looks like if its cut, it will not seat on the shock right.
__________________
2019 Ibis White/Red S4
1997 Nissan Skyline GTR V-SPEC |
Appreciate
0
|
03-01-2013, 10:54 AM | #6 |
✚
101
Rep 1,237
Posts |
Rossifumi is correct. Outside the US, H&R offers different spring rates for the 328i.
Cutting coils off the spring will lower the car more, but at the same time it will absolutely ruin the ride quality and performance; it's a very "Honda" thing to do. |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|