[OpenFlash]

Hi guys,
Things have been really busy over here these last few weeks. Here are some updates:

1) The PROcede for the 535i is done. Here are the before and after results. As tested on the same dyno, same day, within minutes of each other:



The stock car make 272whp and 275lbft of torque which is slightly less than most 335is we've seen. This is probably due to a slightly more restrictive (and quieter) exhaust system. Then again, the car only has 900 miles on the clock and should make a few more hp when it loosens up a bit. With the PROcede, power jumped as high as 315whp and 340+lbft of torque. Needless to say, the on the road performance is substantially better than it was when it was stock. Most notable is the midrange grunt and power response which makes the car feel much lighter than it really is. Very enjoyable. The map we are using is different than the maps we are using for the 335i.


2) As for the 335i, we have just released a new map (v1.47). This map eliminates any misfire related codes that a few people have triggered running older maps. Other than that, it offers the same performance as the 1.45 map that hasn't disappointed anyone on the dyno. Also released is a Lower Boost Target (LBT) version of this map for those who live in high altitude and/or can't hit the boost targets in the non-LBT map. Both maps, as well as a stock/valet map, have been posted in the "What's New" section of our PROcede support forum (http://www.vishnutuningforum.com/for...isplay.php?f=7)

3) PROcede v2 update: Things are going very well. We've been adding new features every week it seems. One of which involves finally using the PROcede's on-board memory to keep track of how hard the car is driven, the driving conditions, etc,. and to adjust power output accordingly. What this means is that we are able to achieve v1 levels of max thermal loads (which has proven to be bulletproof) while still allowing v2 levels of power when the conditions are appropriate. This is just one of the 4 new features offered in v2. You guys will like it. Should start local trials next week. Then non-local beta trials the following week and then production soon after.

Cheers,
shiv

[RiXst3r]

Cool!

[533ogetnom]

what about shipment time? i'm ready to order right now but i wont be in one place for very long, and do you offer overnight (which is important since overnight would be useless if your still backlogged)

[sflgator]

Originally Posted by shiv@vishnu

Hi guys,
Things have been really busy over here these last few weeks. Here are some updates:

2) As for the 335i, we have just released a new map (v1.47). This map eliminates any misfire related codes that a few people have triggered running older maps. Other than that, it offers the same performance as the 1.45 map that hasn't disappointed anyone on the dyno. Also released is a Lower Boost Target (LBT) version of this map for those who live in high altitude and/or can't hit the boost targets in the non-LBT map. Both maps, as well as a stock/valet map, have been posted in the "What's New" section of our PROcede support forum (http://www.vishnutuningforum.com/for...isplay.php?f=7)

3) PROcede v2 update: Things are going very well. We've been adding new features every week it seems. One of which involves finally using the PROcede's on-board memory to keep track of how hard the car is driven, the driving conditions, etc,. and to adjust power output accordingly. What this means is that we are able to achieve v1 levels of max thermal loads (which has proven to be bulletproof) while still allowing v2 levels of power when the conditions are appropriate. This is just one of the 4 new features offered in v2. You guys will like it. Should start local trials next week. Then non-local beta trials the following week and then production soon after.

Cheers,
shiv

AWESOME!!! Thanks for the update, Shiv. I will download and install v1.47 soon. Looking forward to v2.0...can't wait!!!! :rocks:

[mesier1111]

Damn, wish my business would take off already so I can justify the 1300 for Procede.........damn, just a few more months and SHE WILL BE MINE!!!!

[jon@themshop]

Good job on completing the 535i PROcede kit. I'm sure after a few driving cycles the DME will adapt and should yield more power.

[DrewKo]

Great, tx very much Shiv.

[NateNYE90]

v.2 will raise boost level?

[OpenFlash]

Originally Posted by NateNYE90

v.2 will raise boost level?

With v2, peak boost will still max out at 13-14psi.

Shiv

[533ogetnom]

Originally Posted by shiv@vishnu

With v2, peak boost will still max out at 13-14psi.

Shiv

i got denied <_<

[sflgator]

Originally Posted by shiv@vishnu

With v2, peak boost will still max out at 13-14psi.

Shiv

And it's still looking like a bump in WHP by ~ 40WHP?

[jon@themshop]

Originally Posted by sflgator

And it's still looking like a bump in WHP by ~ 40WHP?

changes in ignition or even VANOS timing can really alter the power curves.

[533ogetnom]

Originally Posted by sflgator

And it's still looking like a bump in WHP by ~ 40WHP?

probably advancing timing or something; boost isnt the only way to tune an engine... he was talking about controlling power output depending on how hard your driving (presumably for temp reasons) so that might be part of it

[OpenFlash]

Originally Posted by 533ogetnom

what about shipment time? i'm ready to order right now but i wont be in one place for very long, and do you offer overnight (which is important since overnight would be useless if your still backlogged)

We do offer overnight delivery but it only makes sense when we don't have a 1-2 week backorder (as we do now). We have PROcedes units in stock, preprogrammed and ready to go-- but we are still waiting on our harness where should have been here by now. According to the manufacturer, we're looking at early this upcoming week for delivery. Once they come in, another 40 or 50 kits will ship out, leaving 10-15 kits in stock for a few days/hours/etc,.

shiv

[533ogetnom]

Originally Posted by shiv@vishnu

We do offer overnight delivery but it only makes sense when we don't have a 1-2 week backorder (as we do now). We have PROcedes units in stock, preprogrammed and ready to go-- but we are still waiting on our harness where should have been here by now. According to the manufacturer, we're looking at early this upcoming week for delivery. Once they come in, another 40 or 50 kits will ship out, leaving 10-15 kits in stock for a few days/hours/etc,.

shiv

/pout must have proceed for 1400 mile drive

[NateNYE90]

Originally Posted by 533ogetnom

unless shiv or someone gets back to me i might have to take that, how much for overnight?

cool, you would really help me out plus my price is cheap lol and Shiv is already turning rich i need the money more

[e.n335]

Hi Shiv

Thank you for the updates ! I tested v1.47 briefly and had no issues at all.

Cheers
Eugen

[1BAD535]

The torque curve looks a lot better, Thanks a lot Shiv, cant wait to pick up the car tomorrow.

[1clean335i]

thanks for the updates

[chbrules]

[schneid4323]

boost gauge installed and ready for beta

[techlogik]

40-50*1300=65K

Good for you.

Just have these ready for the 135i when it gets here.