Sponsored by The Tire Rack

[AcE90]

http://www.**********s.com/BMW-CSL-S...nd-M3-cars.htm

I wanted to buy these rims but it says et 40 in the front which is fine but it says for E90 it is +22. I have an e90 dropped on H&R sport and will this fit? Thinking about running 255/35 and 225/40.

[edirtaynine]

roll your fenders and you'll have no problems.

[AcE90]

They are already rolled in the rear. You think it will rub still?

[ModBargains.com]

We do have multiple listings on the website specific to each chassis and there is a mistake on the drop down menu (The listing that you've linked is specific for the E36/E46 chassis). Please see below for the recommended fitment for your E90:

18x8.5 ET40 - 225/40/18
18x9.5 ET33 - 255/35/18
18x9.5 ET22 - 255/35/18 (fender roll required)

[AcE90]

Are you serious?? You guys might want to fix that...... I just bought these wheels from a member...i hope u fix it and im lucky im already rolled in the rear. VMR eh

[landonvan]

I have VMR 710 et 22 with 275's rolled fenders and I only rub with full passengers. If your run a 265 you'll be fine. A 255 IMO will be too stretched.

[ModBargains.com]

Originally Posted by AcE90

Are you serious?? You guys might want to fix that...... I just bought these wheels from a member...i hope u fix it and im lucky im already rolled in the rear. VMR eh

The VMR VB3 listings on our site for the E90/E92/E93 are correct. You were viewing a listing that was for the E36/E46. The request has already been sent to the web team to remove the E90 from the drop down menu as it should not be there. Again, we do have multiple listings on the website specific to certain chassis. The main VMR VB3 18" staggered listing can be found here.

Originally Posted by landonvan

I have VMR 710 et 22 with 275's rolled fenders and I only rub with full passengers. If your run a 265 you'll be fine. A 255 IMO will be too stretched.

The 255 or 265 will work without any issues so long as the fenders are rolled with the 18x9.5 ET22 rears.