Need help with right size spacers

afshin · 03-17-2012, 07:34 PM

I have fit a square set up on my pre lci e90xi 328, they are 18 by 8.5 vmr 710 with an offset of 35 , tires are 235 40 , I don't like how the rims are sitting in the back, what is the biggest size spacer I can put in the back to push them out? Thanks in advance

Dr. G · 03-17-2012, 08:55 PM

Quote:

Originally Posted by afshin

I have fit a square set up on my pre lci e90xi 328, they are 18 by 8.5 vmr 710 with an offset of 35 , tires are 235 40 , I don't like how the rims are sitting in the back, what is the biggest size spacer I can put in the back to push them out? Thanks in advance

15mm would make them equivalent to what most vendors sell on here.

PR3CI5N · 03-17-2012, 09:04 PM

You should go 18mm from BMS. Maybe 5-10mm in front. 10 might be pushing it tho

Dr. G · 03-17-2012, 09:22 PM

Quote:

Originally Posted by PR3CI5N

You should go 18mm from BMS. Maybe 5-10mm in front. 10 might be pushing it tho

10mm up front will be fine.

neilvosko · 07-07-2012, 01:45 PM

i had a 12 mm and a 18 mm in rear with the 718s ET35, but feel like 15mm would be optimum.

neilvosko · 07-07-2012, 01:46 PM

i personally like the way this setup handles w/o spacers, eventhough the rear is tucked in, i can slide around corners better, but then i have the LSD as well.

neilvosko · 07-07-2012, 01:47 PM

i had this setup and found there was absolutely no room left up front without rolling fenders.

bmw325i · 07-07-2012, 03:02 PM

Triple post on old thread = fail

03-17-2012, 07:34 PM	#1
afshin Private 30 Rep 87 Posts Drives: 2023 bmw m850i GC Join Date: Dec 2011 Location: Orangeville iTrader: (0)	Need help with right size spacers I have fit a square set up on my pre lci e90xi 328, they are 18 by 8.5 vmr 710 with an offset of 35 , tires are 235 40 , I don't like how the rims are sitting in the back, what is the biggest size spacer I can put in the back to push them out? Thanks in advance
	Appreciate 0 Tweet Quote

03-17-2012, 09:04 PM	#3
PR3CI5N need4speed 510 Rep 1,903 Posts Drives: 2010 E90 M 335i Join Date: Jun 2010 Location: West Coast iTrader: (24)	You should go 18mm from BMS. Maybe 5-10mm in front. 10 might be pushing it tho __________________ N54
	Appreciate 0 Quote

07-07-2012, 01:45 PM	#5
neilvosko Lieutenant Colonel 89 Rep 1,529 Posts Drives: 335i e92 FBO Join Date: Dec 2011 Location: miami iTrader: (19)	i had a 12 mm and a 18 mm in rear with the 718s ET35, but feel like 15mm would be optimum.
	Appreciate 0 Quote

07-07-2012, 01:46 PM	#6
neilvosko Lieutenant Colonel 89 Rep 1,529 Posts Drives: 335i e92 FBO Join Date: Dec 2011 Location: miami iTrader: (19)	i personally like the way this setup handles w/o spacers, eventhough the rear is tucked in, i can slide around corners better, but then i have the LSD as well.
	Appreciate 0 Quote

07-07-2012, 01:47 PM	#7
neilvosko Lieutenant Colonel 89 Rep 1,529 Posts Drives: 335i e92 FBO Join Date: Dec 2011 Location: miami iTrader: (19)	i had this setup and found there was absolutely no room left up front without rolling fenders.
	Appreciate 0 Quote

07-07-2012, 03:02 PM	#8
bmw325i Major General 223 Rep 5,120 Posts Drives: 2006 BMW 325i Join Date: Oct 2010 Location: United States iTrader: (8)	Triple post on old thread = fail
	Appreciate 0 Quote