How much RWHP is your 335i Procede putting down?

E90ice · 06-09-2007, 02:22 AM

Just curious to see what is the low and high-end of the Procede output.
Please vote ONLY if you had an actual dyno done on your car.

zenmaster · 06-09-2007, 07:27 AM

Wouldn't it be helpful to include things like octane map and type of exhaust?

PresaMat · 06-09-2007, 10:17 AM

Quote:

Originally Posted by zenmaster

Wouldn't it be helpful to include things like octane map and type of exhaust?

My car is dynoing 347RWHP and 402 RWTQ. 93 oct STOCK exhaust.

E90ice · 06-09-2007, 10:24 AM

Quote:

Originally Posted by zenmaster

Wouldn't it be helpful to include things like octane map and type of exhaust?

I don't think there are too many people with exhausts yet.

LACA335i · 06-09-2007, 10:26 AM

Quote:

Originally Posted by E90ice

I don't think there are too many people with exhausts yet.

i have exhaust system but no procede. i will dyno soon once i get it

zenmaster · 06-09-2007, 11:10 AM

How difficult would it be to also graph boost level and A/F through the power range?

Cadence · 06-09-2007, 11:52 AM

Quote:

Originally Posted by PresaMat

My car is dynoing 347RWHP and 402 RWTQ. 93 oct STOCK exhaust.

Is this for real

That is a ton of power and torque for just some extra boost. What other parameters does the PROcede change?

tek818 · 06-09-2007, 04:36 PM

Quote:

Originally Posted by PresaMat

My car is dynoing 347RWHP and 402 RWTQ. 93 oct STOCK exhaust.

wipes eyes

-Ryan- · 06-09-2007, 04:40 PM

Quote:

Originally Posted by AB Tek 818

shiiit... nice. what kind of exhaust u got?

Sorry that made me laugh.

BMWPower06 · 06-10-2007, 03:30 AM

Quote:

Originally Posted by PresaMat

My car is dynoing 347RWHP and 402 RWTQ. 93 oct STOCK exhaust.

that seems excessively high, unless ur running the V2.0 which i doubt you are.

Carnage · 06-10-2007, 03:33 AM

Quote:

Originally Posted by BMWPower06

that seems excessively high, unless ur running the V2.0 which i doubt you are.

look at the dates on the dyno sheet for the answer to that.

///AFRO · 06-10-2007, 03:59 AM

Quote:

Originally Posted by PresaMat

My car is dynoing 347RWHP and 402 RWTQ. 93 oct STOCK exhaust.

Sorry, new here. What does 347RWHP mean???

Carnage · 06-10-2007, 04:02 AM

RWHP- Rear Wheel Horse Power

achien · 06-10-2007, 11:03 AM

Quote:

Originally Posted by PresaMat

My car is dynoing 347RWHP and 402 RWTQ. 93 oct STOCK exhaust.

I hope you upgraded your brakes too, I recommend ones made in carbon-ceramic ...

P.S. while you are at it, don't forget to upgrade those tires, rims, and suspensions too.

just4kickz · 06-10-2007, 12:08 PM

Quote:

Originally Posted by BMWPower06

that seems excessively high, unless ur running the V2.0 which i doubt you are.

its probably just the dyno... this thread is kinda useless unless everybody uses the same dyno

Driver72 · 06-11-2007, 07:23 PM

Quote:

Originally Posted by just4kickz

its probably just the dyno... this thread is kinda useless unless everybody uses the same dyno

Or just posts their stock (before PROcede installation) dyno results.
It's the increase that's important, not the overall numbers.
Many dynos read high and some read low so it's impossible to compare one dyno to another...even if they're both dynojets.

My steptronic sedan did on 91 Octane

Stock: 266 rwhp / 277 rwtq

PROcede v1.4 : 314 rwhp / 359 rwtq

+48 rwhp
+82 rwtq

SoCal335i · 06-11-2007, 09:08 PM

This was on Harman Motives Dyno in Torrance CA.

Stock: 280 rwhp / 282 rwtq

PROcede v1.45 : 339 rwhp / 377 rwtq

+59 rwhp
+95 rwtq

just4kickz · 06-11-2007, 09:15 PM

Quote:

Originally Posted by Driver72

Or just posts their stock (before PROcede installation) dyno results.
It's the increase that's important, not the overall numbers.
Many dynos read high and some read low so it's impossible to compare one dyno to another...even if they're both dynojets.

My steptronic sedan did on 91 Octane

Stock: 266 rwhp / 277 rwtq

PROcede v1.4 : 314 rwhp / 359 rwtq

+48 rwhp
+82 rwtq

if your just looking at the delta... couldnt the increase still be higher/lower because of the particular dyno?

PresaMat · 06-11-2007, 09:31 PM

Quote:

Originally Posted by just4kickz

its probably just the dyno... this thread is kinda useless unless everybody uses the same dyno

Actually... I dont think it was the dyno. Shiv has said on multiple occations my car is a very very high dynoer. Everyone else with MT that day made about 330hp/380tq. This is the secound dyno day at different dynos that mine made about 20hp/tq more then everyone else. Lookup dallas dyno day for more info.

SteveMD · 06-11-2007, 09:39 PM

Quote:

Originally Posted by Cadence

Is this for real

That is a ton of power and torque for just some extra boost. What other parameters does the PROcede change?

Oh boy! Looks like you got some reading up to do.

max boost · 06-11-2007, 10:25 PM

dont know dont care dont give a shit!

12.54

ill leave the dyno # for my c5 vette and the new 427 twin turbos that ll be in by this weekend. 1000rwhp @ 12-14psi

is what i am shooting for.

i am though excited to see that 2.0 picked up a nice chuck of hp

IMJUSS2NASTY · 06-11-2007, 10:29 PM

Most of Shiv's dyno results are done with 91 octane. 350whp and 400wtq does not seem unreasonable at all with 93 octane with v1.45.

View Poll Results: How much RWHP is you 335 Procede putting down?
310 - 320 RWHP	16	21.62%
320 - 330 RWHP	25	33.78%
Over 330 RWHP	33	44.59%
Voters: 74. You may not vote on this poll

06-09-2007, 02:22 AM	#1
E90ice Banned 205 Rep 2,002 Posts Drives: 2008 335xi Coupe Join Date: May 2006 Location: WA iTrader: (0)	How much RWHP is your 335i Procede putting down? Just curious to see what is the low and high-end of the Procede output. Please vote ONLY if you had an actual dyno done on your car. __________________
	Appreciate 0 Tweet Quote

06-09-2007, 07:27 AM	#2
zenmaster Brigadier General 1577 Rep 3,888 Posts Drives: '17 M2 Join Date: Mar 2007 Location: Atlanta iTrader: (1)	Wouldn't it be helpful to include things like octane map and type of exhaust?
	Appreciate 0 Quote

06-09-2007, 11:10 AM	#6
zenmaster Brigadier General 1577 Rep 3,888 Posts Drives: '17 M2 Join Date: Mar 2007 Location: Atlanta iTrader: (1)	How difficult would it be to also graph boost level and A/F through the power range?
	Appreciate 0 Quote

06-10-2007, 04:02 AM	#13
Carnage Lieutenant General 341 Rep 16,407 Posts Drives: people insane Join Date: Jun 2005 Location: classified iTrader: (2)	RWHP- Rear Wheel Horse Power
	Appreciate 0 Quote

06-11-2007, 09:08 PM	#17
SoCal335i Banned 14 Rep 768 Posts Drives: 2007 E92-TT Jet Blk Coral Red Join Date: Jan 2007 Location: Cali iTrader: (2)	This was on Harman Motives Dyno in Torrance CA. Stock: 280 rwhp / 282 rwtq PROcede v1.45 : 339 rwhp / 377 rwtq +59 rwhp +95 rwtq
	Appreciate 0 Quote

06-11-2007, 10:25 PM	#21
max boost Lieutenant 40 Rep 408 Posts Drives: 07 335i Join Date: Nov 2006 Location: east side iTrader: (1)	dont know dont care dont give a shit! 12.54 ill leave the dyno # for my c5 vette and the new 427 twin turbos that ll be in by this weekend. 1000rwhp @ 12-14psi is what i am shooting for. i am though excited to see that 2.0 picked up a nice chuck of hp
	Appreciate 0 Quote

06-11-2007, 10:29 PM	#22
IMJUSS2NASTY Banned 22 Rep 579 Posts Drives: BMW 335I MONTEGO BLUE Join Date: Dec 2006 Location: NYC iTrader: (0)	Most of Shiv's dyno results are done with 91 octane. 350whp and 400wtq does not seem unreasonable at all with 93 octane with v1.45.
	Appreciate 0 Quote