Help..JB4 code deleting...

kelvin2010 · 12-06-2011, 10:01 PM

Hey guys,

I am going to take my car into service because the passenger seat sensor doesn't work well.
I want to clear all the codes before I put my car into service to avoid any chance to get my warranty voided...
I have been searching around, but there is no instruction about how to deleting the code, but only reading the codes...
Can you guys please give me some help?
Thank you!

335i101 · 12-06-2011, 10:28 PM

1-2 on the tach and speedo

kelvin2010 · 12-07-2011, 03:49 AM

Quote:

Originally Posted by 335i101

1-2 on the tach and speedo

After chose that 1-2 on the tach and speedo, then I can shut down the car like usual...And unplug the JB4 from the ECU bay?
Thank you!

JTO24 · 12-07-2011, 05:43 AM

That's what I do right before I shut it off to take out the tune....never had a problem and I've had the injector recall w/ software update done.

kelvin2010 · 12-07-2011, 06:01 AM

Quote:

Originally Posted by JTO24

That's what I do right before I shut it off to take out the tune....never had a problem and I've had the injector recall w/ software update done.

How would I know the JB4 has cleared all the codes or not before I shut the car down?

JTO24 · 12-07-2011, 06:12 AM

Quote:

Originally Posted by kelvin2010

How would I know the JB4 has cleared all the codes or not before I shut the car down?

I guess the only way to know for sure would be to have a bt scan tool but I just delete them and after the blinkers flash the 4 times I turn the ignition off and go from there. It's worked for me so far after a half dozen service visits and a couple misc. visits (i.e. injector recall, adaptive headlight error, etc) They didn't even say anything about having the LUX in there when the headlight malfunctioned haha

Mike@N54Tuning.com · 12-07-2011, 11:16 AM

Quote:

Originally Posted by kelvin2010

How would I know the JB4 has cleared all the codes or not before I shut the car down?

After the delete it then does a read. If you get 2 flashers followed by 4 flashers there are no codes. It's all in the documentation on BMS' forum.

Mike

kelvin2010 · 12-08-2011, 01:17 PM

Quote:

Originally Posted by Mike@N54Tuning.com

After the delete it then does a read. If you get 2 flashers followed by 4 flashers there are no codes. It's all in the documentation on BMS' forum.

Mike

Thank you guys!
Do I have to turn it to the "stock mode" before I delete the code?
Thanks!

By the way, where is the BMS forum? I could not find it on BMS website...
thanks!

12-06-2011, 10:01 PM	#1
kelvin2010 Lieutenant 33 Rep 497 Posts Drives: E92 335i, E82 1M Join Date: Nov 2010 Location: Oregon iTrader: (8)	Help..JB4 code deleting... Hey guys, I am going to take my car into service because the passenger seat sensor doesn't work well. I want to clear all the codes before I put my car into service to avoid any chance to get my warranty voided... I have been searching around, but there is no instruction about how to deleting the code, but only reading the codes... Can you guys please give me some help? Thank you!
	Appreciate 0 Tweet Quote

12-06-2011, 10:28 PM	#2
335i101 Lieutenant 79 Rep 586 Posts Drives: 2008 E60 M5 Join Date: Dec 2010 Location: ND iTrader: (2)	1-2 on the tach and speedo __________________ 2021 Mercedes G550 2015 X5M 2020 Supra-JB4, DP 2008 M5 with muffler delete-sold 2007 650i-sold 2008 335i-JB4, DP, Meth-sold
	Appreciate 0 Quote

12-07-2011, 05:43 AM	#4
JTO24 never could compete with Lloyd Braun 5276 Rep 5,378 Posts Drives: 2022 G80 M3 6MT Join Date: Feb 2011 Location: South Jersey iTrader: (7)	That's what I do right before I shut it off to take out the tune....never had a problem and I've had the injector recall w/ software update done. __________________ 2022 G80 M3 6MT \| Skyscraper Gray \| Kyalami Orange 2018 F87 M2 6MT \| Alpine White (sold) 2016 981 Cayman 6MT \| Jet Black (sold) 2015 F80 M3 DCT \| Tanzanite Blue \| Gold Brown (sold) 2013 E92 M3 6MT \| Mineral White \| Fox Red/Black (sold)
	Appreciate 0 Quote