[caliguy562]

Can someone please confirm that two black wire were inside of this solenoid. I recently removed the fast acting valve to remove the locktite from the threads in order to get a snugger fit. After I reinstall everything, I had no meth flow. I removed the valve again and saw a long black wire just hanging by itself. My guess is that it goes inside the black box.

[OpenFlash]

Originally Posted by caliguy562

Can someone please confirm that two black wire were inside of this solenoid. I recently removed the fast acting valve to remove the locktite from the threads in order to get a snugger fit. After I reinstall everything, I had no meth flow. I removed the valve again and saw a long black wire just hanging by itself. My guess is that it goes inside the black box.

There are two wires that should go into that connector so it looked like one popped out. When you open up the connector, you will see 3 terminals. Two are parallel and one is perpendicular. Just connect the wires to the two terminals that are parallel to each other. Polarity doesn't matter. Very simple. There is a spring loaded screw type terminal so need to solder or crimp anything.

shiv

[caliguy562]

And we're back in the game. For a min I thought I killed my valve as i had to apply heat to remove the locktite.

[OpenFlash]

Excellent.

[caliguy562]

Thanks for the quick response. Even on stage 2, these new maps are insane. Chirped going into third merging onto the highway without meth. Smh. Intercooler and clutch are next on the to buy list.