[rex5272]

Hey guys,
Thinking of dropping my car on H&R race.

Currently running 235/35/19F and 265/30/19R and 19" VMR CSLs (probably the least aggressive offset, unsure but its barely concave) Not sure about the front but I was told 19x10 on the rear.

It doesnt really sit flush on the fender, its slightly tucked.

Wondering if I'll have problems dropping the car on H&R race w/o rolled fenders.

Thanks!

PS: Please post pics of E92s with H&R race if you can, did a search and there quite hard to come by.

[rex5272]

Here is a high-res shot to give you guys an idea


These are the rears

[NiVeDh]

All I can tell you is that those aren't 19x10 in the rear. Those don't even look like VMR VB3s. They look like Miros. Got another picture?

[Gavin@MMW]

Originally Posted by NiVeDh

All I can tell you is that those aren't 19x10 in the rear. Those don't even look like VMR VB3s. They look like Miros. Got another picture?

+1
This, Who sold those to you?

a 265/30/19 would be more stretched then that on a 10"

[rex5272]

They are VMRs

The seller wasn't sure if it was 9.5 or 10
If you guys dont think their 10s then Im betting their 9.5s
Offset is most likely et33

[VMRWheels]

OP,

From the look of the spoke design, it doesn't look like they are authentic VMR VB3's.

-Charles@VMRWheels

[rex5272]

Here are pics to help
I'm pretty sure they are VMRs
If not, any Idea what they are?

[rex5272]

[7e90dan]

what you have look like CSL reps from **********s with the ///M stickers and BMW center caps

http://http://www.**********s.com/BM...eels-18-19.htm

[rex5272]

Originally Posted by 7e90dan

what you have look like CSL reps from **********s with the ///M stickers and BMW center caps

http://http://www.**********s.com/BM...eels-18-19.htm

Thanks! makes me feel ripped off that I dont have VMRs but i am pretty happy because the wheels look really good.

DAMN I wish they came in 10" width

Anybody know how to confirm this?

[Gavin@MMW]

Originally Posted by rex5272

Thanks! makes me feel ripped off that I dont have VMRs but i am pretty happy because the wheels look really good.

DAMN I wish they came in 10" width

Anybody know how to confirm this?

Those are probably Miros, so they wont have a 10" option.

To find out, take it to a proper tire shop, and have them measure the beads - not the barrel overall.

[rex5272]

Originally Posted by Gavin@MMW

Those are probably Miros, so they wont have a 10" option.

To find out, take it to a proper tire shop, and have them measure the beads - not the barrel overall.

Thanks, Ill probably have that done when I change tires or something.