|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
n55 Procede v4
|
|
10-26-2010, 09:22 PM | #1 |
52
Rep 428
Posts |
n55 Procede v4
I was told to relay this info to the masses
Below is a picture of the N55 Procede. Installation is straight-forward. With the exception of 12v power and the two CANbus wires, everything just plugs in at the following connectors: Boost Solenoid Crank Sensor TMAP Sensor MAP Sensor MAF Sensor 12v switched power is jumped from one of the fuses in what used to the be ECU box. And the two CANbus wires just tap onto the factory CANbus wires that are wrapped with cloth tape. No wire splicing, no wire cutting. Everything is plug and play. Full dash displays, autotuning, command center, progressive meth, etc,. Virtually the same functionality as our n54 Procede that has been developed for years. Not bad for a first product. And as always, free firmware/map updates to come... We i installed several kits in local 135s and 335s this past week. All with great results. And non-locals are getting kits shipped out to them this week. Price is $845. To order and/or to arrange a FREE install, just call us at our toll free number. Or email us if you don't want to leave a phone bill trail for your wife to find |
10-26-2010, 09:38 PM | #4 |
Major General
3398
Rep 6,589
Posts
Drives: BMW
Join Date: Aug 2007
Location: 49417 and 60610
|
Nice work, the N55 guys are going to be stoked!
|
Appreciate
0
|
10-26-2010, 09:43 PM | #6 |
52
Rep 428
Posts |
IIRC, the last time we hit the dyno (pretty early in development), we baselined at 265whp/275lbft and left with 330whp/375lbft. Since then, we complete throttle control which vastly improved drivability and may have improved dyno numbers by a few ponies. But the car hasn't been back on the rollers to verify. But with meth and a cat-back, it run 117+mph traps. About 12-13mph faster than stock
|
Appreciate
0
|
10-26-2010, 10:13 PM | #7 | |
Lieutenant General
654
Rep 10,587
Posts |
Quote:
good stuff! Thats quick for sure. what boost levels on the 1/4 mile runs w meth? curious how this stock single is running.
__________________
|
|
Appreciate
0
|
10-27-2010, 03:10 AM | #11 |
I don't drive fast , i fly very low
14
Rep 358
Posts |
Great Job guys ,, now I feel comfort jumping to the N55 after this ,,,
when is the N55 harness will be ready for order for N54 Procede Onwers ( estimated Price )?? |
Appreciate
0
|
10-27-2010, 09:28 AM | #13 |
Lieutenant Colonel
30
Rep 1,748
Posts |
That harness Looks familar... (not giving away any secrets)... I'm pretty sure that will work in the X5.... Send me a harness and I'll test that theory... I already have a V4, so, what's a harness going to run me?
__________________
BMW X5 35i: Boopie Exhaust & Intercooler, K&N Drop in Filter, JB3 (3+ psi) 2013 Dodge Challenger R/T: CAI, Catch Can, Custom Exhaust, Headers, 87MM Throttle Body, Diablo Custom 93 OCT Tune |
Appreciate
0
|
10-27-2010, 03:11 PM | #15 |
Lieutenant
34
Rep 522
Posts |
|
Appreciate
0
|
10-27-2010, 04:17 PM | #16 |
First Lieutenant
90
Rep 328
Posts |
Well, I would hope so!
It's kind of weird that we don't see a final tune only dyno graph on pump gas for a product that's been released. Makes me unsure about buying something that I have no sure what the final results are... |
Appreciate
0
|
10-27-2010, 04:28 PM | #17 |
1736
Rep 17,960
Posts
Drives: A Lot
Join Date: Sep 2006
Location: SF Bay, CA
iTrader: (0)
Garage List 2018 Ducati Panigal ... [0.00]
2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00] |
Oh lol.. those dyno numbers are without meth. Just a tune only. We never re-dyno'd the car after adding meth and the exhaust.
As for the 117+mph run, boost was 16psi tapering to 12psi by redline (which seems to be the limit of the turbo/wastegate). I'm guessing power would probably be in the 380-ish whp range. |
Appreciate
0
|
10-27-2010, 04:46 PM | #19 |
Brigadier General
798
Rep 4,784
Posts |
It's a totally different engine.
__________________
ERnie
2016 BSM/f80/ZCP |
Appreciate
0
|
10-28-2010, 01:37 AM | #20 |
USMC Lance corporal
19
Rep 180
Posts |
idk what to do this or bms stage 1....i do want more power...but like vishnu said 16 psi seems like thats all the turbo can handle meaning....im risking alot by putting this tune on the car?...like there is a good chance something will go wrong....im just curious...just wondering....idk..what should i do guys?
input please. Cause im ready to order either one. I no mean tuning my ecu period something could happen. Idk i want a tune def. but i just dont want a serious problem.. Eric
__________________
N55 6spd, M-sport nav,ipod,BMW kidney grills,amber gones,GP H8 8500k,GP H3 4500k,6k headlight bulbs, de-badged, 20 % tints, icarbon spoiler. AFE air scoops,Berk full sport exhaust, CDV mod, BMS stage 1, Berk down pipe, injen intake,carbon splitters, carbon mirror caps. custom black and flat clear interior trim pieces. interior mods. eibach lowering springs, nitto 555 tires.
|
Appreciate
0
|
10-28-2010, 01:51 AM | #21 | |
52
Rep 428
Posts |
Quote:
In terms of performance, functionality and drivability, there's really no comparison between this tune and the other one. If you can even consider it a tune given that it only raises boost. |
|
Appreciate
0
|
10-28-2010, 02:03 AM | #22 |
Brigadier General
798
Rep 4,784
Posts |
I'm happy with my jb3 stage 1 but I'm not going to start a war here. They are very different tunes. If I could buy the procede I would, not like I'm going to be using meth anytime soon, but yeah.
Unless Vishnu cares to sponsor me I don't see myself trading anytime soon
__________________
ERnie
2016 BSM/f80/ZCP |
Appreciate
0
|
Bookmarks |
|
|