|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
VPA-B222R -wiring diagrams for idrive ?
|
|
10-13-2009, 06:19 PM | #1 |
New Member
0
Rep 6
Posts |
VPA-B222R -wiring diagrams for idrive ?
Hello,
I have problems with instaling a Alpine VPA-B222R into my car. (e91 - with idrive) Does anyone knew the wiring diagram of the CCC module ? The colours and description of wires? (I have basic audio) There are lot of wires from alpine that I need to connect to stock system. Regards, Chris |
10-13-2009, 06:33 PM | #2 |
New Member
0
Rep 6
Posts |
From the Alpine there are 2 wires:
From the alpine there are two harnes: (so I have to connect them somewere...?) First: (the description on the wires is in / / : yellow /batt/ - yellow-green /parking brake/ pink-black /in int/ red /acc/ blue /p.ant/ - black // blue-white /remo/ white + white/black /f-lch/ grey + grey-black /f-rch/ green + green-black /r-lch/ violet + violet-black /r-rch 2. second white-brown /rem out aux1/ white-brown /rem out aux2/ white-green /guide cont/ orange /illm/ grey-red /sp input front right (-)/ white-red /sp input front left (-)/ white /sp input front left (+)/ grey /sp input front right (+)/ Does Anyone know where to connect them with stock idrive HU ? |
Appreciate
0
|
10-13-2009, 08:14 PM | #3 |
Brigadier General
289
Rep 3,201
Posts |
You should buy a Quadlink adapter. There are several sources in the EU (Dietz is one I know). http://www.dietzshop.biz/
There are problems with US-spec cars when the HU is removed. You may have problems updating the SW in future if you do not install BMW HU somewhere (in storage bin?) |
Appreciate
0
|
10-14-2009, 03:36 PM | #4 | |
New Member
0
Rep 6
Posts |
Quote:
The only one thing I dont knew is the names of the wires going to the HU - and where to connect those two Alpine harness. (the wires and names of them I have written in the last post) |
|
Appreciate
0
|
Bookmarks |
|
|