jb3 install help!!!!

skater335 · 09-24-2009, 12:50 PM

I just started to install my jb3 pinout and got to the first wire that is in the large black connector and the #10 pin yellow wire for boost and noticed that it is just an open spot. Has anyone had this issue. the jb3 has a male and female wire for the spot. is there another spot for the boost wire?

cu_north · 09-24-2009, 12:58 PM

There's a good chance that you are reading the numbers wrong on the oem connector. Make sure that you are counting in the right direction too. It's hard to read the numbers on the connectors without a good light source. Triple check! Good Luck.

skater335 · 09-24-2009, 01:01 PM

i counted them correctly. I have all the other wires correct except for just this one is not there. I have no idea what to do at this point.

OpenFlash · 09-24-2009, 01:04 PM

Quote:

Originally Posted by cu_north

There's a good chance that you are reading the numbers wrong on the oem connector. Make sure that you are counting in the right direction too. It's hard to read the numbers on the connectors without a good light source. Triple check! Good Luck.

+1. Also a very good idea to go with a PnP harness. Your sanity and DME pins will thank you for it in the long run

Shiv

cu_north · 09-24-2009, 01:08 PM

Quote:

Originally Posted by skater335

i counted them correctly. I have all the other wires correct except for just this one is not there. I have no idea what to do at this point.

I'd say contact BMS, Terry usually replies very quickly. Or you could post a pic up of the large black suconnector, maybe we can identify what's going on. I'd say contact Terry first.

skater335 · 09-24-2009, 01:17 PM

i did terry took care of it! awesome response time! got it taken care of

cu_north · 09-24-2009, 01:19 PM

Perfect! Have fun!

Mike@N54Tuning.com · 09-24-2009, 01:43 PM

Quote:

Originally Posted by skater335

I just started to install my jb3 pinout and got to the first wire that is in the large black connector and the #10 pin yellow wire for boost and noticed that it is just an open spot. Has anyone had this issue. the jb3 has a male and female wire for the spot. is there another spot for the boost wire?

Glad you figured it out

Mike

Jonny550 · 09-24-2009, 01:54 PM

chances were you was reading the numbers in the wrong direction

J-boogey · 09-30-2009, 06:03 PM

was it an easy installation or do you recommend a tech to do it?

Terrance28 · 09-30-2009, 06:35 PM

Its an easy installation just take your time.

x7original4x · 10-01-2009, 04:28 AM

easy install just take your time and double check if you dont want any codes

09-24-2009, 12:50 PM	#1
skater335 sergeant 4 Rep 53 Posts Drives: 2003 e39 m5, turbo e36 m3 Join Date: Apr 2009 Location: oldsmar, FL iTrader: (0)	jb3 install help!!!! I just started to install my jb3 pinout and got to the first wire that is in the large black connector and the #10 pin yellow wire for boost and noticed that it is just an open spot. Has anyone had this issue. the jb3 has a male and female wire for the spot. is there another spot for the boost wire?
	Appreciate 0 Tweet Quote

09-24-2009, 12:58 PM	#2
cu_north Seasoned Lurker 4 Rep 160 Posts Drives: 2007 E90 335i Black/Black Join Date: Sep 2008 Location: AZ iTrader: (0)	There's a good chance that you are reading the numbers wrong on the oem connector. Make sure that you are counting in the right direction too. It's hard to read the numbers on the connectors without a good light source. Triple check! Good Luck.
	Appreciate 0 Quote

09-24-2009, 01:01 PM	#3
skater335 sergeant 4 Rep 53 Posts Drives: 2003 e39 m5, turbo e36 m3 Join Date: Apr 2009 Location: oldsmar, FL iTrader: (0)	i counted them correctly. I have all the other wires correct except for just this one is not there. I have no idea what to do at this point.
	Appreciate 0 Quote

09-24-2009, 01:17 PM	#6
skater335 sergeant 4 Rep 53 Posts Drives: 2003 e39 m5, turbo e36 m3 Join Date: Apr 2009 Location: oldsmar, FL iTrader: (0)	i did terry took care of it! awesome response time! got it taken care of
	Appreciate 0 Quote

09-24-2009, 01:19 PM	#7
cu_north Seasoned Lurker 4 Rep 160 Posts Drives: 2007 E90 335i Black/Black Join Date: Sep 2008 Location: AZ iTrader: (0)	Perfect! Have fun!
	Appreciate 0 Quote

09-24-2009, 01:54 PM	#9
Jonny550 Brigadier General 241 Rep 4,936 Posts Drives: 2012 550i Xdrive Join Date: Feb 2009 Location: Jersey Shore iTrader: (14)	chances were you was reading the numbers in the wrong direction __________________ [SIGPIC][/SIGPIC] .
	Appreciate 0 Quote

09-30-2009, 06:03 PM	#10
J-boogey Major 70 Rep 1,339 Posts Drives: F30 335xi Msport Join Date: Sep 2009 Location: Oceanside, New York iTrader: (3)	was it an easy installation or do you recommend a tech to do it?
	Appreciate 0 Quote

09-30-2009, 06:35 PM	#11
Terrance28 Brigadier General 109 Rep 3,334 Posts Drives: Crimson Red E92 Join Date: Nov 2007 Location: Killeen, TX iTrader: (17)	Its an easy installation just take your time. __________________ Mods list got too long, lets just say more than enough.
	Appreciate 0 Quote

10-01-2009, 04:28 AM	#12
x7original4x Private First Class 3 Rep 194 Posts Drives: 335i Join Date: Nov 2006 Location: South Florida iTrader: (0)	easy install just take your time and double check if you dont want any codes __________________ Legal Disclaimer: Anything I or anyone else says about my vehicle on this website(e90post.com or any affiliated sites), pertaining to modifications, is only to gain acceptance from my/our peers, and does not actually represent anything actually existing on my car, and thus, cannot be held against me in any issues, i.e. warranty claims, that may arise.
	Appreciate 0 Quote