▀▄ eas | Rogue Engineering S65 Underdrive Pulley - Free Install

david @ eas · 08-31-2009, 12:34 PM

We're proud to announce that Rogue Engineering's M3 Power Pulleys just got better. For this week only buy your Rogue Engineering Power Pulley and get a complimentary install per your appointment. All you need to do is purchase this week, by calling directly, or sending me a PM, set up an appointment time at your convenience, stop by and drive home with some new added power.

Please note that this is compatible for Manual E9X M3's and DCT E9X M3's as well.

Heart of a BMW
As most know, the heart of every BMW is its engine. When you blip the throttle to ask for power, the engine responds with the power that BMW designed into it. Well, almost all of the power.

The engine is also asked to drive specific accessories in the vehicle such as the A/C compressor, alternator, power steering pump and water pump. All of these crank pulley driven accessories inherently affect the engine's efficiency.

Underdriving the Overachievers
Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand of power is requested, the power pulley kit allows for the freed power to become apparent.

Rogue Engineering Power Pullies are machined from 6061-T6 heat treated aluminum and specially coated with a MIL-A-8625 Type III hardcoat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, black, blue, silver, green, etc.). The hardcoat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.

Until now, MIL-A-8625 Type III hardcoat anodize was not available in a deep, rich, black color. By working with their anodizing vendors, RE has been able to implement a hardcoat anodize finish that we are proud to phase into our product line. This unique gloss, jet black anodize finish is unlike the "dark greyish-brown" of other dark hardcoat finishes. This unique finish is now standard on all Rogue Engineering pulleys.

Its all in the R&D
Rogue Engineering is proud of its motorsport association with its racing team partner ships which allow us to offer products used in professional racing. This association allows us to offer the BMW enthusiast the same parts being used in motorsport endurance racing. For example, our E46 M3 RACE pulley kit is a direct result of our involvement with Automatic Racing since 2005. Similar associations with Bimmerworld Racing continue to allow Rogue Engineering to develop parts that work in racing environments, not just bullet points on an internet based website.

Expect an approx 8hp gain on top end after installation. As always, local e9X m3 owners are welcomed to stop by our facility to see or pickup in person.

Rogue Engineering - Power Pulleys - e9X M3
http://www.europeanautosource.com/pr...oducts_id=1952

This offer ends Friday 9/4/2009!

david @ eas · 08-31-2009, 12:34 PM

2008-5/08 6SPD models (non DCT) belts included, not shown

6/08+ and all DCT models belts included, not shown

powertrip · 08-31-2009, 01:00 PM

This is a $150 savings..people should JUMP on this

.

MrHarris · 09-01-2009, 07:32 AM

Oh wow, I think the time has come to do this mod!

Vic55 · 09-01-2009, 10:02 AM

Quote:

Originally Posted by MrHarris

Oh wow, I think the time has come to do this mod!

I concur, made my appt already. Its a cheap investment for incremental HP on our S65 cars. I did the same with my S85 M6 too.

tom @ eas · 09-01-2009, 11:59 AM

Quote:

Originally Posted by Vic55

I concur, made my appt already. Its a cheap investment for incremental HP on our S65 cars. I did the same with my S85 M6 too.

Appointment confirmed - we'll see you on Friday.

For others, week is filling up fast.

Alias · 09-01-2009, 01:31 PM

Sooo I can purchase this today and have it installed in 2 weeks?

david @ eas · 09-01-2009, 01:37 PM

Quote:

Originally Posted by Alias

Sooo I can purchase this today and have it installed in 2 weeks?

Not a problem at all as long as it's purchased this week. Just make sure to PM me or call me directly, if you haven't already, to set up the appointment first

Vic55 · 09-01-2009, 02:14 PM

Quote:

Originally Posted by tom @ eas

Appointment confirmed - we'll see you on Friday.

For others, week is filling up fast.

Thanks Tom, probably gonna get some MS filters too---- if you dont mind

You guys do V1 installs?

MrHarris · 09-02-2009, 03:25 AM

Getting mine installed later today

noxredna · 09-02-2009, 06:10 AM

Bummer I'm not a local.. maybe free shipping for non locals on this product? hehehe

david @ eas · 09-02-2009, 11:38 AM

Quote:

Originally Posted by noxredna

Bummer I'm not a local.. maybe free shipping for non locals on this product? hehehe

Sent you a PM

david @ eas · 09-02-2009, 12:34 PM

Quote:

Originally Posted by MrHarris

Getting mine installed later today

KWY91 · 09-04-2009, 06:41 AM

Wow this is awesome! Can u give me a shipping Quote to Singapore?

Cheers!

tom @ eas · 09-04-2009, 11:11 AM

Quote:

Originally Posted by M3_Kidracer

Wow this is awesome! Can u give me a shipping Quote to Singapore?

Cheers!

You have PM.

Gentlemen, this special ends at end of business day today. Call in to make your appointment right away.

tom @ eas · 09-06-2009, 08:47 PM

Thanks to everyone that participated - special is now over.

08-31-2009, 12:34 PM	#1
david @ eas BimmerPost Supporting Vendor 254 Rep 4,048 Posts Drives: BMW Join Date: Mar 2008 Location: Anaheim iTrader: (5)	▀▄ eas \| Rogue Engineering S65 Underdrive Pulley - Free Install - This Week Only! We're proud to announce that Rogue Engineering's M3 Power Pulleys just got better. For this week only buy your Rogue Engineering Power Pulley and get a complimentary install per your appointment. All you need to do is purchase this week, by calling directly, or sending me a PM, set up an appointment time at your convenience, stop by and drive home with some new added power. Please note that this is compatible for Manual E9X M3's and* DCT E9X M3's as well.* Heart of a BMW As most know, the heart of every BMW is its engine. When you blip the throttle to ask for power, the engine responds with the power that BMW designed into it. Well, almost all of the power. The engine is also asked to drive specific accessories in the vehicle such as the A/C compressor, alternator, power steering pump and water pump. All of these crank pulley driven accessories inherently affect the engine's efficiency. Underdriving the Overachievers Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand of power is requested, the power pulley kit allows for the freed power to become apparent. Rogue Engineering Power Pullies are machined from 6061-T6 heat treated aluminum and specially coated with a MIL-A-8625 Type III hardcoat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, black, blue, silver, green, etc.). The hardcoat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear. Until now, MIL-A-8625 Type III hardcoat anodize was not available in a deep, rich, black color. By working with their anodizing vendors, RE has been able to implement a hardcoat anodize finish that we are proud to phase into our product line. This unique gloss, jet black anodize finish is unlike the "dark greyish-brown" of other dark hardcoat finishes. This unique finish is now standard on all Rogue Engineering pulleys. Its all in the R&D Rogue Engineering is proud of its motorsport association with its racing team partner ships which allow us to offer products used in professional racing. This association allows us to offer the BMW enthusiast the same parts being used in motorsport endurance racing. For example, our E46 M3 RACE pulley kit is a direct result of our involvement with Automatic Racing since 2005. Similar associations with Bimmerworld Racing continue to allow Rogue Engineering to develop parts that work in racing environments, not just bullet points on an internet based website. Expect an approx 8hp gain on top end after installation. As always, local e9X m3 owners are welcomed to stop by our facility to see or pickup in person. Rogue Engineering - Power Pulleys - e9X M3 http://www.europeanautosource.com/pr...oducts_id=1952 This offer ends Friday 9/4/2009!
	Appreciate 0 Tweet Quote

08-31-2009, 12:34 PM	#2
david @ eas BimmerPost Supporting Vendor 254 Rep 4,048 Posts Drives: BMW Join Date: Mar 2008 Location: Anaheim iTrader: (5)	2008-5/08 6SPD models (non DCT) belts included, not shown 6/08+ and all DCT models belts included, not shown
	Appreciate 0 Quote

08-31-2009, 01:00 PM	#3
powertrip Scared money don't make money. 67 Rep 1,449 Posts Drives: 2009 E92 M3 DCT Join Date: Apr 2009 Location: Irvine, CA iTrader: (3) Garage List 2009 E92 M3 [0.00]	This is a $150 savings..people should JUMP on this . __________________ 2009 E92 M3/DCT/Alpine White/Fox Red/Carbon Leather OE Tuned 402 whp & 303 wtq/Gintani X-pipe/MXP Axle Back/Rogue Pulley/AFE Stage 2/Cosmetics By IND & EAS HUGE THANKS: Gintani, OE Tuning, and EAS
	Appreciate 0 Quote

09-01-2009, 07:32 AM	#4
MrHarris yodog 197 Rep 5,026 Posts Drives: '86 Corolla Join Date: Jun 2007 Location: Diamond Bar, Ca iTrader: (5) Garage List 2009 BMW [10.00]	Oh wow, I think the time has come to do this mod! __________________ 2009 E92 M3 \| Alpine White \| Black Extended \| Advan RS \| Turner Test Pipes \| Dinan Axle-Back \| OETuning \| Eibach Springs \| UUC SSK \| VRS Front Lip \| VRS Type I Diffuser \| Matte Black \| RPi Scoops \| MS Filter \| Yokohama AD08 \| F1 Pinnacle Special Thanks: Gintani \| OETuning \| eAs
	Appreciate 0 Quote

09-01-2009, 01:31 PM	#7
Alias dork 38 Rep 477 Posts Drives: //M Join Date: Jul 2007 Location: so cal iTrader: (3)	Sooo I can purchase this today and have it installed in 2 weeks?
	Appreciate 0 Quote

09-02-2009, 03:25 AM	#10
MrHarris yodog 197 Rep 5,026 Posts Drives: '86 Corolla Join Date: Jun 2007 Location: Diamond Bar, Ca iTrader: (5) Garage List 2009 BMW [10.00]	Getting mine installed later today __________________ 2009 E92 M3 \| Alpine White \| Black Extended \| Advan RS \| Turner Test Pipes \| Dinan Axle-Back \| OETuning \| Eibach Springs \| UUC SSK \| VRS Front Lip \| VRS Type I Diffuser \| Matte Black \| RPi Scoops \| MS Filter \| Yokohama AD08 \| F1 Pinnacle Special Thanks: Gintani \| OETuning \| eAs
	Appreciate 0 Quote

09-02-2009, 06:10 AM	#11
noxredna Captain 63 Rep 672 Posts Drives: E92 M3, E30 M3, 1M, F10 M5 Join Date: Sep 2008 Location: Singapore & San Fransisco iTrader: (0)	Bummer I'm not a local.. maybe free shipping for non locals on this product? hehehe
	Appreciate 0 Quote

09-04-2009, 06:41 AM	#14
KWY91 Major 36 Rep 1,297 Posts Drives: 2015 BMW M3 (on order), 458 Join Date: Sep 2008 Location: Exeter, Devon iTrader: (3)	Wow this is awesome! Can u give me a shipping Quote to Singapore? Cheers! __________________ Wanna know my mods for my 335i? It's here! http://www.e90post.com/forums/showth...ght=blue+water Lamborghini's Mica Orange E93 M3 Akrapovic Exhaust //Challenge Rear CF diffuser//ESS VT-575 Supercharger
	Appreciate 0 Quote

09-06-2009, 08:47 PM	#16
tom @ eas BimmerPost Supporting Vendor 8108 Rep 18,798 Posts Drives: BMW Join Date: Nov 2005 Location: Anaheim, CA iTrader: (19) Garage List 2018 BMW i3s [0.00] 2010 BMW M3 [6.50] 2015 BMW M4 [5.25]	Thanks to everyone that participated - special is now over. __________________ Tom G. \| european auto source (eas) email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22 GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
	Appreciate 0 Quote