Procede Rev II installation help

e90_guy · 07-10-2009, 11:30 PM

I just tried installing Procede on my e90. I installed the harness but was not able to extract the power pin from the power connector. I watched the video but my connector is different. It cannot be ply open like the one in the video. My car is 2008 335i. So how do I get the pin out. Also there are two pins in the connector, not exactly sure which one to extract. Thanks

ZBMW · 07-11-2009, 08:07 AM

Look at the install video closely. It shows only half of the connector. You are looking at both ends connected.
BTDT

e90_guy · 07-11-2009, 12:58 PM

I figured the problem. I only pull out the top part of the connector. This thing is so damn hard to pull out.

07-10-2009, 11:30 PM	#1
e90_guy Private First Class 13 Rep 158 Posts Drives: 2008 335i Join Date: Jun 2009 Location: Richmond, BC iTrader: (1)	Procede Rev II installation help I just tried installing Procede on my e90. I installed the harness but was not able to extract the power pin from the power connector. I watched the video but my connector is different. It cannot be ply open like the one in the video. My car is 2008 335i. So how do I get the pin out. Also there are two pins in the connector, not exactly sure which one to extract. Thanks
	Appreciate 0 Tweet Quote

07-11-2009, 08:07 AM	#2
ZBMW Black Forest Bimmerphile 2 Rep 137 Posts Drives: 2007 335i Join Date: Jan 2007 Location: Colorado iTrader: (1)	Look at the install video closely. It shows only half of the connector. You are looking at both ends connected. BTDT
	Appreciate 0 Quote

07-11-2009, 12:58 PM	#3
e90_guy Private First Class 13 Rep 158 Posts Drives: 2008 335i Join Date: Jun 2009 Location: Richmond, BC iTrader: (1)	I figured the problem. I only pull out the top part of the connector. This thing is so damn hard to pull out.
	Appreciate 0 Quote