How will this setup do?

AU335 · 04-02-2009, 02:11 PM

Just got a new set of Linea Corse Dyna's in today and will putting my existing tires from my CSLs on them....

Will this setup be fine?

Without fender modification
dropped on H&R Sports

Front - 19 x 8.5 , offset 30 , tire set up 235/35/19 (Falken 452)
Rear - 19 x 10 , offset 37, tire set up 265/30/19 (Falken 452)

Should i get 275's for the rear and roll the fenders, or is the setup okay as-is?

Nikos335i · 04-02-2009, 02:13 PM

It will work as long as you don't mind the stretched look of the rears!

AU335 · 04-02-2009, 05:00 PM

Quote:

Originally Posted by Nikos335i

It will work as long as you don't mind the stretched look of the rears!

hmmm... anyone have a picture of a 265 on a 10in rear?

remmib · 04-02-2009, 05:04 PM

Quote:

Originally Posted by AU335

Just got a new set of Linea Corse Dyna's in today and will putting my existing tires from my CSLs on them....

Will this setup be fine?

Without fender modification
dropped on H&R Sports

Front - 19 x 8.5 , offset 35 , tire set up 235/35/19 (Falken 452)
Rear - 19 x 10 , offset 30, tire set up 265/30/19 (Falken 452)

Should i get 275's for the rear and roll the fenders, or is the setup okay as-is?

I thought the offset was ET30 in the front and ET37 in the rear.

AU335 · 04-02-2009, 05:21 PM

Quote:

Originally Posted by remmib

I thought the offset was ET30 in the front and ET37 in the rear.

You are 100% right... my mistake

...fixed OP

MyE92 · 04-02-2009, 05:23 PM

Yeah, your offsets are switched I think... Should the front be 30, and the rear 35?
Anyways, I think you should get 275's because I've seen 265's on an ET35/37, and it sticks out a bit. From far, you can hardly notice the rim sticking out. But from up close, its really noticable.

AU335 · 04-02-2009, 05:35 PM

Quote:

Originally Posted by MyE92

Yeah, your offsets are switched I think... Should the front be 30, and the rear 35?
Anyways, I think you should get 275's because I've seen 265's on an ET35/37, and it sticks out a bit. From far, you can hardly notice the rim sticking out. But from up close, its really noticable.

yeh..i dont want the rim sticking out like that...hmmm.. what to do

Shop is putting the tires on the rims tomorrow morning. Might just go ahead and see how the 265's turn out and if its not to my liking then ill cross that road then.

Might be seeing (2) 265 Falken 452's in the FS section soon

, one of them being brand spankin' new....

info@VMRWheels · 04-02-2009, 05:52 PM

19x10 with a 265... it'll work just fine.

MyE92 · 04-02-2009, 05:55 PM

Quote:

Originally Posted by AU335

yeh..i dont want the rim sticking out like that...hmmm.. what to do

Shop is putting the tires on the rims tomorrow morning. Might just go ahead and see how the 265's turn out and if its not to my liking then ill cross that road then.

Might be seeing (2) 265 Falken 452's in the FS section soon

, one of them being brand spankin' new....

One of the members on here (LuL77) just put new 265 Falken 452's on his LC Lemans. And now he just put them up for sale.

He decided to go with 275's instead. PM him, he has pictures of his 265s on his lemans.

AU335 · 04-02-2009, 06:00 PM

Quote:

Originally Posted by ty@VMRWheels

19x10 with a 265... it'll work just fine.

Thats not that bad. Tires/Rims should be mounted by tomorrow, so ill know then i guess.

Zoeb@WheelDude.com · 04-02-2009, 07:21 PM

Quote:

Originally Posted by AU335

Thats not that bad. Tires/Rims should be mounted by tomorrow, so ill know then i guess.

The ones pictures are a General UHP, but those have a more square sidewall....the Falkens are definitely more rounded.

Zoeb

AU335 · 04-02-2009, 07:28 PM

Quote:

Originally Posted by Zoeb@WheelDude.com

The ones pictures are a General UHP, but those have a more square sidewall....the Falkens are definitely more rounded.

Zoeb

so you will the 265 Falken do on the 10" rear? Should i go with a 275 and roll the fenders, or will the 265's work? A little stretch is okay, but i would prefer not to have a noticeable gap between the tire/rim.

Zoeb@WheelDude.com · 04-02-2009, 07:39 PM

horrible picture, but this is a 265.30.19 FK452 on a 10"

I say give it a shot...you can put a larger spacer on with a 265 if you decide to

aut0sh0cker · 04-02-2009, 08:19 PM

I have a 265 on a 10" and it looks perfect (no stretch at all) but the tire is a GY F1 asymmetric. not sure about a 452, but i bet its similar

AU335 · 04-02-2009, 09:47 PM

Im gonna give it go. Dont need to convince myself otherwise before even seeing them in person. Ill know by tomorrow when i pick up my car.. Thanks guys for all your help

Nikos335i · 04-03-2009, 08:22 AM

Quote:

Originally Posted by Zoeb@WheelDude.com

The ones pictures are a General UHP, but those have a more square sidewall....the Falkens are definitely more rounded.

Zoeb

+1

Nikos335i · 04-03-2009, 08:23 AM

Quote:

Originally Posted by AU335

Im gonna give it go. Dont need to convince myself otherwise before even seeing them in person. Ill know by tomorrow when i pick up my car.. Thanks guys for all your help

I'll snap a pic of my 275's Falken 452's on 10" wheels for you later today!

Craig@SupremePower · 04-03-2009, 09:33 AM

Worx just fine bro...

04-02-2009, 02:11 PM	#1
AU335 Colonel 192 Rep 2,443 Posts Drives: 2007 e92 335i Join Date: Mar 2007 Location: Southeast iTrader: (7) Garage List 2007 335i [0.00]	How will this setup do? Just got a new set of Linea Corse Dyna's in today and will putting my existing tires from my CSLs on them.... Will this setup be fine? Without fender modification dropped on H&R Sports Front - 19 x 8.5 , offset 30 , tire set up 235/35/19 (Falken 452) Rear - 19 x 10 , offset 37, tire set up 265/30/19 (Falken 452) Should i get 275's for the rear and roll the fenders, or is the setup okay as-is? Last edited by AU335; 04-02-2009 at 05:21 PM..
	Appreciate 0 Tweet Quote

04-02-2009, 02:13 PM	#2
Nikos335i Brigadier General 92 Rep 3,822 Posts Drives: 2012 B8 S4 & 2013 F30 328xi Join Date: Nov 2007 Location: Montreal, Canada iTrader: (13) Garage List 2012 Audi S4 [9.00] 2007 E90 335i [9.00] 2011 Audi A4 Avant [10.00]	It will work as long as you don't mind the stretched look of the rears! __________________ *'12 B8 S4 Ice Silver on Black/Premium/DSG/Sport Diff/Nav/Carbon Inlays/19' Titanium Wheels/RS4 Grill/AWE exhaust/Alu Kreuz/H&R OE/Pagid RS19* '13 F30 328xi Sapphire Black/Coral Red/Sportline/gloss black with matte red/Style 397 18" wheels gone: '07 E90 335i, Alpine White/Black with aluminum/sport/ steptronic/paddles/premium/Logic7 gone: '06 E61 530xi Sapphire Black/Black with aluminum/premium/panoramic sunroof/Logic7/PDC
	Appreciate 0 Quote

04-02-2009, 05:23 PM	#6
MyE92 El Presidente 278 Rep 6,962 Posts Drives: your mom wild. Join Date: May 2007 Location: NJ iTrader: (24)	Yeah, your offsets are switched I think... Should the front be 30, and the rear 35? Anyways, I think you should get 275's because I've seen 265's on an ET35/37, and it sticks out a bit. From far, you can hardly notice the rim sticking out. But from up close, its really noticable.
	Appreciate 0 Quote

04-02-2009, 05:52 PM	#8
info@VMRWheels BimmerPost Supporting Vendor 31 Rep 326 Posts Drives: BMW Join Date: Mar 2009 Location: Anaheim, CA iTrader: (0)	19x10 with a 265... it'll work just fine.
	Appreciate 0 Quote

04-02-2009, 07:39 PM	#13
Zoeb@WheelDude.com 379 Rep 11,992 Posts Drives: M3 (e92), X5 (E70), 428i (F32) Join Date: Nov 2006 Location: Fremont, CA iTrader: (45) Garage List 1995 BMW M3 [0.00] 2008 BMW M3 [8.00]	horrible picture, but this is a 265.30.19 FK452 on a 10" I say give it a shot...you can put a larger spacer on with a 265 if you decide to
	Appreciate 0 Quote

04-02-2009, 08:19 PM	#14
aut0sh0cker meh 123 Rep 1,756 Posts Drives: E92 335i, 997.2 C4S Join Date: Jan 2008 Location: 91362 iTrader: (2)	I have a 265 on a 10" and it looks perfect (no stretch at all) but the tire is a GY F1 asymmetric. not sure about a 452, but i bet its similar
	Appreciate 0 Quote

04-02-2009, 09:47 PM	#15
AU335 Colonel 192 Rep 2,443 Posts Drives: 2007 e92 335i Join Date: Mar 2007 Location: Southeast iTrader: (7) Garage List 2007 335i [0.00]	Im gonna give it go. Dont need to convince myself otherwise before even seeing them in person. Ill know by tomorrow when i pick up my car.. Thanks guys for all your help
	Appreciate 0 Quote

04-03-2009, 09:33 AM	#18
Craig@SupremePower G.O.A.T.! 1000 Rep 74,998 Posts Drives: '18 GMC Yukon XL Join Date: Mar 2008 Location: New Jersey iTrader: (14)	Worx just fine bro...
	Appreciate 0 Quote