[Ptoscano911]

Does anyone know if you code the anti dazzle do you lose the coding for the lci taillights ?

[Maverik259]

Originally Posted by Ptoscano911

Does anyone know if you code the anti dazzle do you lose the coding for the lci taillights ?

Considering 1 is headlight and the other tail lights. Why would you.

[Ptoscano911]

Originally Posted by Maverik259

Considering 1 is headlight and the other tail lights. Why would you.

Originally Posted by Maverik259

Considering 1 is headlight and the other tail lights. Why would you.

Don't know. One of the coders I spoke to said it erases it. I was just seeing if anyone had done it before w tails coded.

[kubax86]

Originally Posted by Ptoscano911

Don't know. One of the coders I spoke to said it erases it. I was just seeing if anyone had done it before w tails coded.

Yes, no issues about it.
Just need manual coding.

[Maverik259]

Originally Posted by Ptoscano911

Don't know. One of the coders I spoke to said it erases it. I was just seeing if anyone had done it before w tails coded.

Need a new coder.

[RalphT5]

Is it possible to code the anti dazzle headlights with BimmerCode in Expert mode?

[kubax86]

Originally Posted by RalphT5

Is it possible to code the anti dazzle headlights with BimmerCode in Expert mode?

Technically yes, but too much work

[Almaretto]

Originally Posted by Ptoscano911

Does anyone know if you code the anti dazzle do you lose the coding for the lci taillights ?

VO coding resets modules to factory. But, can easily FDL code or restore LCI taillight coding.

[CrashCade]

Originally Posted by Almaretto

VO coding resets modules to factory. But, can easily FDL code or restore LCI taillight coding.

Technically speaking once you add HO-Wort: HELC and code it, it should stay correct? So when you remove 5AP from the VO it shouldn’t delete HELC.

[kubax86]

Originally Posted by CrashCade

Technically speaking once you add HO-Wort: HELC and code it, it should stay correct? So when you remove 5AP from the VO it shouldn’t delete HELC.

It won't delete it although HELC is not valid for us spec lights (for eu works)

[Almaretto]

Originally Posted by CrashCade

Technically speaking once you add HO-Wort: HELC and code it, it should stay correct? So when you remove 5AP from the VO it shouldn’t delete HELC.

HELC and removing 5AP are not competing codes. Plus it does not work that way unless I am not following correctly.

[Almaretto]

Originally Posted by CrashCade

Technically speaking once you add HO-Wort: HELC and code it, it should stay correct? So when you remove 5AP from the VO it shouldn’t delete HELC.

That depends on if you wrote changes to VCM or not. Car does not car what is in Vehicle Order unless you are using to apply FDL changes.