Fujita Dyno Results for e90 330i

Lucid4000 · 05-09-2006, 08:26 PM

Found this on the Fujita Website and just figured that some of you people would like to know the info. Don't know how true it is but looks pretty damn accurate to me.

ksfrogman · 05-09-2006, 08:31 PM

I'd like to see this on a 6MT.

Lucid4000 · 05-09-2006, 08:38 PM

Me too. I might have to pick up one of these intakes. I wish other companies had intakes. Hopefully soon.

Hunter399 · 05-09-2006, 08:48 PM

hmmm my dyno showed different

arcrox · 05-09-2006, 09:02 PM

Funny how a steptronic 330i is dynoing about the same numbers as Guess' 325i manual. Is the 2nd gear test affecting the results?

Driv3r · 05-09-2006, 09:33 PM

arent you supposed to pick a gear which ratio is closer to 1?? wouldnt that be 3rd gear? im not 100% sure but thats what i thought. anyways this pulls the same as stock 325 maual

GO 325!

ward · 05-09-2006, 10:25 PM

wierd their own company shows that it increases HP

I trust independant tests more

like hunters, where he lost power

ksfrogman · 05-10-2006, 12:07 AM

too bad we don't have any pre-install dynos on hunter's car. we don't know if it actually caused a gain or loss. we are looking at rear wheel HP not flywheel HP right?

diesel007 · 05-10-2006, 12:25 AM

No dyno results are going to show the correct numbers with Steptronic cars. The gain (or losses) are accurate but the numbers are off because you cannot get a full 4th gear run from the car. For some reason the car kicks the gear down before redline in 4th gear. You can get a full run in 2nd gear and 3rd however they will show incorrect TQ and HP numbers.

Hunters results are just as faulty as anyone else because he did not do a stock pre-install run on the dyno for comparison. My TQ numbers were off because we could only do 3rd gear pulls.

We need someone with a stock MT E90 to purchase an intake and do before and after runs, only then can we make judgments of these products.

ksfrogman · 05-10-2006, 01:19 AM

I won't mention names, but it's too bad Fujita retracted their offer to sponsor a couple of e90post members who had manual transmissions (325i and 330i), both of whom would have offered their cars for pre- and post-install dynos. The company's insincerity to follow-through with it's promise has not helped its reputation.

tl_boy · 05-10-2006, 01:31 AM

after Hunter's thread, the fajita jokes, and what not, Fujita is probably pretty pissed off at us...

lol...

Quote:

Originally Posted by ksfrogman

I won't mention names, but it's too bad Fujita retracted their offer to sponsor a couple of e90post members who had manual transmissions (325i and 330i), both of whom would have offered their cars for pre- and post-install dynos. The company's insincerity to follow-through with it's promise has not helped its reputation.

Carnage · 05-10-2006, 07:35 AM

Quote:

Originally Posted by diesel007

No dyno results are going to show the correct numbers with Steptronic cars. The gain (or losses) are accurate but the numbers are off because you cannot get a full 4th gear run from the car. For some reason the car kicks the gear down before redline in 4th gear. You can get a full run in 2nd gear and 3rd however they will show incorrect TQ and HP numbers.

Hunters results are just as faulty as anyone else because he did not do a stock pre-install run on the dyno for comparison. My TQ numbers were off because we could only do 3rd gear pulls.

We need someone with a stock MT E90 to purchase an intake and do before and after runs, only then can we make judgments of these products.

Just out curiousty, have people been completely shutting down the DTC/DSC (holding the DTC button for 3+ seconds) when trying to run dyno's on a steptronic? I'm only asking because I don't believe I'll seen any mention of it. If not since that is supposed to help with the kickdown I wonder it that will help the car gets a full run in 4th gear? Just a thought......

ward · 05-10-2006, 10:27 AM

Quote:

Originally Posted by ksfrogman

I won't mention names, but it's too bad Fujita retracted their offer to sponsor a couple of e90post members who had manual transmissions (325i and 330i), both of whom would have offered their cars for pre- and post-install dynos. The company's insincerity to follow-through with it's promise has not helped its reputation.

yeah, thanks hunter, now I have to go buy my own fajitas

dkizerian · 05-10-2006, 11:35 AM

Quote:

Originally Posted by ward

wierd their own company shows that it increases HP

I trust independant tests more

like hunters, where he lost power

Hunter's doesn't show anything other than what he made with the intae on. He didn't get his car dyno'd before on the same dyno without the intake, so we DO NOT and CAN NOT know if he lost or gained power!

Driv3r · 05-10-2006, 03:37 PM

Quote:

Originally Posted by diesel007

No dyno results are going to show the correct numbers with Steptronic cars. The gain (or losses) are accurate but the numbers are off because you cannot get a full 4th gear run from the car. For some reason the car kicks the gear down before redline in 4th gear. You can get a full run in 2nd gear and 3rd however they will show incorrect TQ and HP numbers.

Hunters results are just as faulty as anyone else because he did not do a stock pre-install run on the dyno for comparison. My TQ numbers were off because we could only do 3rd gear pulls.

We need someone with a stock MT E90 to purchase an intake and do before and after runs, only then can we make judgments of these products.

WHAT IF! we made a fund. on this forum and people could each give in a few bucks. Then i would have some money to dyno before and after on my MT 325i..

Ryan@Motorwerks · 05-10-2006, 05:35 PM

Quote:

Originally Posted by dkizerian

Hunter's doesn't show anything other than what he made with the intae on. He didn't get his car dyno'd before on the same dyno without the intake, so we DO NOT and CAN NOT know if he lost or gained power!

Yes we do, w/ Fujita=he loses to stock 325, w/o Fujita he beats stock 325. End of story.

rtakashima · 01-02-2007, 03:32 PM

We would love to bring in the 330 and 325 manuals to do a before and after test. It would allow us to do more research and look for improvements. I have asked others here if they recall getting any calls about test pieces and nobody has heard anything. If anybody is interested in bringing their stock vehicle to Temecula, CA, we can do a before and after dyno run for you. As for the 2nd gear test in the automatic, we could not get the vehicle to hold gear. However, the stock intake and modified intake were both done in the same gear. Please email me at ryan@f5air.com if you are interested. The intake will be free for you as well as the dyno time.

rtakashima · 02-08-2007, 06:45 PM

We would love to bring in the 330 and 325 manuals to do a before and after test. It would allow us to do more research and look for improvements. I have asked others here if they recall getting any calls about test pieces and nobody has heard anything. If anybody is interested in bringing their stock vehicle to Temecula, CA, we can do a before and after dyno run for you. As for the 2nd gear test in the automatic, we could not get the vehicle to hold gear. However, the stock intake and modified intake were both done in the same gear. Please email me at ryan@f5air.com if you are interested. The intake will be free for you as well as the dyno time.

05-09-2006, 08:26 PM	#1
Lucid4000 Major 57 Rep 1,190 Posts Drives: 335i AW Sport 6MT Join Date: Jan 2006 Location: NYC!! iTrader: (5) Garage List 2006 330i Sport [0.00]	Fujita Dyno Results for e90 330i Found this on the Fujita Website and just figured that some of you people would like to know the info. Don't know how true it is but looks pretty damn accurate to me.
	Appreciate 0 Tweet Quote

05-09-2006, 08:31 PM	#2
ksfrogman Major General 570 Rep 6,750 Posts Drives: E90 330i 6MT Join Date: Nov 2005 Location: Torrance, CA iTrader: (12) Garage List 2006 330i [0.00] 2006 330i [0.00]	I'd like to see this on a 6MT. __________________
	Appreciate 0 Quote

05-09-2006, 08:38 PM	#3
Lucid4000 Major 57 Rep 1,190 Posts Drives: 335i AW Sport 6MT Join Date: Jan 2006 Location: NYC!! iTrader: (5) Garage List 2006 330i Sport [0.00]	Me too. I might have to pick up one of these intakes. I wish other companies had intakes. Hopefully soon.
	Appreciate 0 Quote

05-09-2006, 08:48 PM	#4
Hunter399 Major General 323 Rep 8,091 Posts Drives: F90M5 Join Date: Apr 2005 Location: Houston, TX iTrader: (33)	hmmm my dyno showed different
	Appreciate 0 Quote

05-09-2006, 09:02 PM	#5
arcrox E90post addict 15 Rep 489 Posts Drives: 2024 G20 M340i Join Date: Sep 2005 Location: Scottsdale, AZ iTrader: (0) Garage List 2006 325i [0.00]	Funny how a steptronic 330i is dynoing about the same numbers as Guess' 325i manual. Is the 2nd gear test affecting the results?
	Appreciate 0 Quote

05-09-2006, 09:33 PM	#6
Driv3r Colonel 177 Rep 2,355 Posts Drives: 2006 E46 M3 ZCP Join Date: May 2005 Location: Miami Beach, FL iTrader: (8) Garage List 2006 325i [0.00]	arent you supposed to pick a gear which ratio is closer to 1?? wouldnt that be 3rd gear? im not 100% sure but thats what i thought. anyways this pulls the same as stock 325 maual GO 325! __________________ 2006 E46 M3 ZCP 6SPD-Interlagos Blue - 6SPD - SSK - AA Headers -AA Tune - Navigation w/ Splashscreen Mod - 3M Crystalline Series 60 - Carbon Splitters - Swissvax Treated - Bridgestone 2012 Yamaha FZ8 - Matte Black/Grey - Michelin Pilot Pure 2CT - Vortex Rear Sets - Yoshimura R-77D & Fender Delete - Spectro Race Oil - GP Reverse Shifting
	Appreciate 0 Quote

05-09-2006, 10:25 PM	#7
ward Major General 155 Rep 6,158 Posts Drives: F Join Date: May 2005 Location: T iTrader: (0)	wierd their own company shows that it increases HP I trust independant tests more like hunters, where he lost power
	Appreciate 0 Quote

05-10-2006, 12:07 AM	#8
ksfrogman Major General 570 Rep 6,750 Posts Drives: E90 330i 6MT Join Date: Nov 2005 Location: Torrance, CA iTrader: (12) Garage List 2006 330i [0.00] 2006 330i [0.00]	too bad we don't have any pre-install dynos on hunter's car. we don't know if it actually caused a gain or loss. we are looking at rear wheel HP not flywheel HP right? __________________
	Appreciate 0 Quote

05-10-2006, 12:25 AM	#9
diesel007 Not Stock 160 Rep 2,774 Posts Drives: 325I Join Date: Dec 2005 Location: San Diego iTrader: (4) Garage List 2006 325 [0.00]	No dyno results are going to show the correct numbers with Steptronic cars. The gain (or losses) are accurate but the numbers are off because you cannot get a full 4th gear run from the car. For some reason the car kicks the gear down before redline in 4th gear. You can get a full run in 2nd gear and 3rd however they will show incorrect TQ and HP numbers. Hunters results are just as faulty as anyone else because he did not do a stock pre-install run on the dyno for comparison. My TQ numbers were off because we could only do 3rd gear pulls. We need someone with a stock MT E90 to purchase an intake and do before and after runs, only then can we make judgments of these products. __________________ *Wallpaper of the month* 1/1/072/1/07
	Appreciate 0 Quote

05-10-2006, 01:19 AM	#10
ksfrogman Major General 570 Rep 6,750 Posts Drives: E90 330i 6MT Join Date: Nov 2005 Location: Torrance, CA iTrader: (12) Garage List 2006 330i [0.00] 2006 330i [0.00]	I won't mention names, but it's too bad Fujita retracted their offer to sponsor a couple of e90post members who had manual transmissions (325i and 330i), both of whom would have offered their cars for pre- and post-install dynos. The company's insincerity to follow-through with it's promise has not helped its reputation. __________________
	Appreciate 0 Quote

01-02-2007, 03:32 PM	#17
rtakashima New Member 0 Rep 8 Posts Drives: 06 SC IS350 Join Date: Jan 2007 Location: CA iTrader: (0)	We would love to bring in the 330 and 325 manuals to do a before and after test. It would allow us to do more research and look for improvements. I have asked others here if they recall getting any calls about test pieces and nobody has heard anything. If anybody is interested in bringing their stock vehicle to Temecula, CA, we can do a before and after dyno run for you. As for the 2nd gear test in the automatic, we could not get the vehicle to hold gear. However, the stock intake and modified intake were both done in the same gear. Please email me at ryan@f5air.com if you are interested. The intake will be free for you as well as the dyno time.
	Appreciate 0 Quote

02-08-2007, 06:45 PM	#18
rtakashima New Member 0 Rep 8 Posts Drives: 06 SC IS350 Join Date: Jan 2007 Location: CA iTrader: (0)	dyno testing We would love to bring in the 330 and 325 manuals to do a before and after test. It would allow us to do more research and look for improvements. I have asked others here if they recall getting any calls about test pieces and nobody has heard anything. If anybody is interested in bringing their stock vehicle to Temecula, CA, we can do a before and after dyno run for you. As for the 2nd gear test in the automatic, we could not get the vehicle to hold gear. However, the stock intake and modified intake were both done in the same gear. Please email me at ryan@f5air.com if you are interested. The intake will be free for you as well as the dyno time.
	Appreciate 0 Quote