N54 Charge pipe question (aftermarket)

suni_335 · 11-01-2018, 08:04 AM

Hey guys.

Bought aftermarket charge pipe which has Tial BOV flange + 2 diverter valves (Example on the attached image). So my question is since.. I'll be using Tial BOV, what should happen with the two valves? Should I bung them with something or there are better ways to use them?

Name: Screen Shot 2018-11-01 at 14.57.35.png
Views: 328
Size: 152.8 KB

Name: Screen Shot 2018-11-01 at 14.57.35.png
Views: 328
Size: 152.8 KB

tony55343 · 11-01-2018, 10:15 AM

Cover them with the same method you are using for the stock holes. Chair foot caps from home depot etc and hose clamp is what most people, including myself use for the factory ones.

Snypa · 11-01-2018, 03:13 PM

Chair foot caps with zip tie.

suni_335 · 11-06-2018, 07:55 AM

Thanks!

11-01-2018, 08:04 AM	#1
suni_335 New Member 2 Rep 17 Posts Drives: BMW E92 335i Join Date: Dec 2017 Location: Bulgaria iTrader: (0)	N54 Charge pipe question (aftermarket) Hey guys. Bought aftermarket charge pipe which has Tial BOV flange + 2 diverter valves (Example on the attached image). So my question is since.. I'll be using Tial BOV, what should happen with the two valves? Should I bung them with something or there are better ways to use them?
	Appreciate 0 Tweet Quote

11-01-2018, 10:15 AM	#2
tony55343 First Lieutenant 104 Rep 330 Posts Drives: 08 335i coupe 6mt Join Date: Jul 2018 Location: MN iTrader: (1)	Cover them with the same method you are using for the stock holes. Chair foot caps from home depot etc and hose clamp is what most people, including myself use for the factory ones.
	Appreciate 1 TemjinX2520.50 Quote

11-01-2018, 03:13 PM	#3
Snypa Captain 37 Rep 656 Posts Drives: Like a mahdman ! Join Date: May 2013 Location: I-75 iTrader: (3)	Chair foot caps with zip tie. __________________ SUPER SLOW E90
	Appreciate 0 Quote

11-06-2018, 07:55 AM	#4
suni_335 New Member 2 Rep 17 Posts Drives: BMW E92 335i Join Date: Dec 2017 Location: Bulgaria iTrader: (0)	Thanks!
	Appreciate 0 Quote