Anyone dyno with these mods?

thurstonhowelltha3rd · 03-22-2017, 02:41 AM

Anyone dyno an n54 with DCI, inlets, catless downpipes, MHD, and e30?
Or similar?

BSM n54iS · 03-22-2017, 11:17 AM

Yes

thurstonhowelltha3rd · 03-22-2017, 11:23 AM

Quote:

Originally Posted by BdSM n54iS

Yes

What was your HP and tq? If you can upload a graph, I'd appreciate it

BSM n54iS · 03-22-2017, 11:41 AM

Quote:

Originally Posted by thurstonhowelltha3rd

What was your HP and tq? If you can upload a graph, I'd appreciate it

Oh, I haven't personally...I was just being a d*ck and answering your original question

sorry. But really... What octane? No ic? Custom tune? Ots e30 mhd map, or which map you running? Need more info... Plus

you can find others' with similar mods posting their figures and deduce around what you have, or just go to the dyno yourself, otherwise don't worry so much about your figures... It's fast, enjoy

thurstonhowelltha3rd · 03-22-2017, 11:47 AM

I have not installed my MHD yet. I was just looking for a little insight before I do. I've searched but did not find many dyno numbers on cars with inlets+e85

Unknown_Car · 03-22-2017, 12:00 PM

Probably around 430whp

thurstonhowelltha3rd · 03-22-2017, 12:06 PM

Its a 6AT with Alpina TCU. If that matters

jwebb335xi · 03-22-2017, 02:32 PM

Quote:

Originally Posted by Roma_335i

Probably around 430whp

I went to a dyno day a while back. e30 cars were round 400-420 whp. With inlets and adjusted tune I'd bet you'd a bit more.. Duty cycle and stress on turbos is supposed to fall a bit as well.

Unknown_Car · 03-22-2017, 06:31 PM

Quote:

Originally Posted by jwebb335xi

I went to a dyno day a while back. e30 cars were round 400-420 whp. With inlets and adjusted tune I'd bet you'd a bit more.. Duty cycle and stress on turbos is supposed to fall a bit as well.

I will dyno my car this spring. I am fbo With inlets and running e60 jb4 with mhd. I am hoping to be over 470whp.

thurstonhowelltha3rd · 03-22-2017, 07:31 PM

Quote:

Originally Posted by Roma_335i

I will dyno my car this spring. I am fbo With inlets and running e60 jb4 with mhd. I am hoping to be over 470whp.

You must have 6MT. I heard that 6AT will slip at around 450whp. Is this true?

Unknown_Car · 03-22-2017, 08:37 PM

Quote:

Originally Posted by thurstonhowelltha3rd

You must have 6MT. I heard that 6AT will slip at around 450whp. Is this true?

I am auto. I have a friend who is jest under 500whp he had that set up for probably 2 years without any problems, and he tracks his car also. His is auto as well.

thurstonhowelltha3rd · 03-22-2017, 10:01 PM

Quote:

Originally Posted by Roma_335i

I am auto. I have a friend who is jest under 500whp he had that set up for probably 2 years without any problems, and he tracks his car also. His is auto as well.

That's good info. Because those transmission upgrade prices are just ridiculous.

AK. · 03-23-2017, 01:19 AM

This was on FBO MHD V5 E40 map from a while ago. Stock inlets/stock fueling at the time.

Unknown_Car · 03-23-2017, 06:32 AM

Quote:

Originally Posted by AK.

This was on FBO MHD V5 E40 map from a while ago. Stock inlets/stock fueling at the time.

Nice. So with inlets and e60 should be easy 450+whp.

Antetokounmpo · 03-23-2017, 06:43 AM

Quote:

Originally Posted by Roma_335i

Nice. So with inlets and e60 should be easy 450+whp.

Easy, no. 450whp is probably about right.

thurstonhowelltha3rd · 03-23-2017, 06:47 AM

I see BQ tuning putting some really good numbers with Factory turbos. I assume those are just Dyno Glory runs. Does anyone have experience with a tune from them that is a daily driver

AK. · 03-23-2017, 10:57 AM

Quote:

Originally Posted by Roma_335i

Quote:

Originally Posted by AK.

This was on FBO MHD V5 E40 map from a while ago. Stock inlets/stock fueling at the time.

Nice. So with inlets and e60 should be easy 450+whp.

Yes, I'm sure that's 100% possible to hit 450whp on E60. I just went with the full 100% E85 route as I didn't want to bother with mixing every time.

LMB335IS · 03-23-2017, 05:31 PM

Quote:

Originally Posted by thurstonhowelltha3rd

I see BQ tuning putting some really good numbers with Factory turbos. I assume those are just Dyno Glory runs. Does anyone have experience with a tune from them that is a daily driver

I've been running his tunes for almost 2 1/2 yrs now. No dyno glory here. My DD tune before inlets/outlets put down 460whp/533wtq and ran high 11's with street tires and no launch (2.15 60ft). Haven't been back to the 1/4 since adding inlets/outlets but my 1/2 mile traps are up 3-5 mph depending on the DA.

thurstonhowelltha3rd · 03-23-2017, 05:56 PM

Quote:

Originally Posted by LMB335IS

I've been running his tunes for almost 2 1/2 yrs now. No dyno glory here. My DD tune before inlets/outlets put down 460whp/533wtq and ran high 11's with street tires and no launch (2.15 60ft). Haven't been back to the 1/4 since adding inlets/outlets but my 1/2 mile traps are up 3-5 mph depending on the DA.

Nice. E85?

LMB335IS · 03-23-2017, 07:08 PM

Quote:

Originally Posted by thurstonhowelltha3rd

Quote:

Originally Posted by LMB335IS

I've been running his tunes for almost 2 1/2 yrs now. No dyno glory here. My DD tune before inlets/outlets put down 460whp/533wtq and ran high 11's with street tires and no launch (2.15 60ft). Haven't been back to the 1/4 since adding inlets/outlets but my 1/2 mile traps are up 3-5 mph depending on the DA.

Nice. E85?

Yep, E60.

Unknown_Car · 03-23-2017, 10:52 PM

Quote:

Originally Posted by AK.

Yes, I'm sure that's 100% possible to hit 450whp on E60. I just went with the full 100% E85 route as I didn't want to bother with mixing every time.

How long have you bean running full e85?

thurstonhowelltha3rd · 03-23-2017, 11:16 PM

@AK. What all do you need to install to run 100% e85?

03-22-2017, 02:41 AM	#1
thurstonhowelltha3rd Private First Class 36 Rep 167 Posts Drives: n54 335i Join Date: Oct 2015 Location: Murrieta, CA iTrader: (0)	Anyone dyno with these mods? Anyone dyno an n54 with DCI, inlets, catless downpipes, MHD, and e30? Or similar? __________________ RB2s-MHD-FBO-INLETS-C/Os-SWAYS-BBK
	Appreciate 0 Tweet Quote

03-22-2017, 11:17 AM	#2
BSM n54iS Brigadier General 2685 Rep 4,202 Posts Drives: '11 335is \| '16 Macan Turbo Join Date: Aug 2015 Location: Everywhere and Nowhere iTrader: (7)	Yes __________________ '11 335is BSM MT "BMW Performance Editon" \| '16 Porsche Macan Turbo GruppeM CF Intake \| AR Resonated DP \| ER CP \| Turbosmart RacePort BOV \| Cobb FMIC \| RB Inlets \| RB External Mishi/Turner OCC \| Michelin PS4 \| BMW Performance Springs/Bilstein B8 + Dinan & M3 bits \| BMW Brembo BBK \| BMW Performance CF Spoiler \| BMW Performance CF Lip \| BMW Performance Alcantara \| PS Designs GTS Armrest \| AG H6-40 \| Rear Seat Delete
	Appreciate 1 Antetokounmpo1551.50 Quote

03-22-2017, 11:47 AM	#5
thurstonhowelltha3rd Private First Class 36 Rep 167 Posts Drives: n54 335i Join Date: Oct 2015 Location: Murrieta, CA iTrader: (0)	I have not installed my MHD yet. I was just looking for a little insight before I do. I've searched but did not find many dyno numbers on cars with inlets+e85
	Appreciate 0 Quote

03-22-2017, 12:00 PM	#6
Unknown_Car Major 447 Rep 1,060 Posts Drives: Few and diffrent Join Date: May 2015 Location: All over iTrader: (0)	Probably around 430whp __________________ JB4 Tune, MHD backend flash, E85 VRSF 7" Intercooler, BMS OCC VRSF CP & TIAL 50mm BOV, BMP PI DocRace 6266 single turbo.
	Appreciate 0 Quote

03-22-2017, 12:06 PM	#7
thurstonhowelltha3rd Private First Class 36 Rep 167 Posts Drives: n54 335i Join Date: Oct 2015 Location: Murrieta, CA iTrader: (0)	Its a 6AT with Alpina TCU. If that matters
	Appreciate 0 Quote

03-23-2017, 01:19 AM	#13
AK. Lieutenant 137 Rep 589 Posts Drives: E90 M3/E92 M3 Join Date: Jan 2015 Location: California iTrader: (3) Garage List 2010 E90 335i [10.00]	This was on FBO MHD V5 E40 map from a while ago. Stock inlets/stock fueling at the time. Attached Images
	Appreciate 1 Unknown_Car447.00 Quote

03-23-2017, 06:47 AM	#16
thurstonhowelltha3rd Private First Class 36 Rep 167 Posts Drives: n54 335i Join Date: Oct 2015 Location: Murrieta, CA iTrader: (0)	I see BQ tuning putting some really good numbers with Factory turbos. I assume those are just Dyno Glory runs. Does anyone have experience with a tune from them that is a daily driver __________________ RB2s-MHD-FBO-INLETS-C/Os-SWAYS-BBK
	Appreciate 0 Quote

03-23-2017, 11:16 PM	#22
thurstonhowelltha3rd Private First Class 36 Rep 167 Posts Drives: n54 335i Join Date: Oct 2015 Location: Murrieta, CA iTrader: (0)	@AK. What all do you need to install to run 100% e85? __________________ RB2s-MHD-FBO-INLETS-C/Os-SWAYS-BBK
	Appreciate 0 Quote