[Dawko]

I can't seem to find any information on the diameter of the pipes on which the tips are attached - not the exhaust pipe itself to be clear. Does anyone have this information or know where this could be found?

I'm looking for this information to see if the M3/4 CP tips could be fitted on the stock exhaust. It may be a long shot but these would actually look really good as there are 1. black chrome and 2. slanted.
I know there are other tips available, (BMS, ebay,..) but I have no interest in buying these tips. I would prefer to have these specific M3/4 tips.
If these do not fit, is welding an option?

I don't have my car yet so not in the possibility to measure these. If anyone would be willing to do so, that would be greatly appreciated!

[BASELINE]

Originally Posted by GregD

I can't seem to find any information on the diameter of the pipes on which the tips are attached - not the exhaust pipe itself to be clear. Does anyone have this information or know where this could be found?

I'm looking for this information to see if the M3/4 CP tips could be fitted on the stock exhaust. It may be a long shot but these would actually look really good as there are 1. black chrome and 2. slanted.
I know there are other tips available, (BMS, ebay,..) but I have no interest in buying these tips. I would prefer to have these specific M3/4 tips.
If these do not fit, is welding an option?

I don't have my car yet so not in the possibility to measure these. If anyone would be willing to do so, that would be greatly appreciated!

Pull your stockers off and measure. Would be great info for everyone.

[Dawko]

Originally Posted by BASELINE

Pull your stockers off and measure. Would be great info for everyone.

Yeah ok.. Thought my last sentences were trying to explain something

[BASELINE]

Originally Posted by GregD

Yeah ok.. Thought my last sentences were trying to explain something

Missed that... my bad

[Wires]

Just because I was in a good mood today, I grabbed the calipers for you.

Not sure what B58 car you are getting, but on my 340, the pipes are 60.0 mm just in front of the tips.

[Dawko]

Originally Posted by Wires

Just because I was in a good mood today, I grabbed the calipers for you.

Not sure what B58 car you are getting, but on my 340, the pipes are 60.0 mm just in front of the tips.

Lucky me, thanks for the effort appreciated!

Too bad these won't fit then, M3/4 has an inner diameter of 70mm so these aren't plug 'n play. Maybe some sort of adapter would work. I'll have to check it out an post results once and if it should be possible.

[Wires]

No problem. Hopefully it will be helpful for the next person as well.

[SingleturboVert]

Originally Posted by Wires

Just because I was in a good mood today, I grabbed the calipers for you.

Not sure what B58 car you are getting, but on my 340, the pipes are 60.0 mm just in front of the tips.

Winner!