[R32DBP]

I gotta give it up to Enzo for creating a beast of a tune on my car and his team for the hospitality they showed me while I waited. If you are local to his shop, I suggest you get his tune done ASAP. Being able to fully manipulate the timing, ignition, etc parameters to tune the car is honestly the way to go on this car. My car took a bit longer than expected tuning as Enzo kept seeing something he didn't like when tuning and he kept road testing and road testing it til he got it perfect. Enzo's attention to detail to his tune is impeccable. This is no off the shelf tune, which is what I am used to in the VW world for my R32 turbo. He was out for about 3 hours back and forth trying to perfect the tune and I was completely fine with it because I knew it was in good hands.

Like I said, if any of you are in the tri state area I'd suggest you get the tune ASAP. Even if you're too far away just ship the ECU in. You will not be disappointed with it.

I installed a P3Cars Digital Boost gauge before I got the tune and was seeing about 7-9psi on the car stock., with the higher psi level in Sport+ mode. After the tune I'm now around 15psi and it's honestly a different car. It is such a fun drive now especially rowing through the gears and taking corners. I don't have much pics of my car getting tuned but I do have pics of the shop, which is such a clean shop. You will not be disappointed. I will be doing a full video shoot of the car soon and will be sure to get some driving videos up here soon. Until then here are some pics of the shop and my dirty car in one of the pics haha.

[harkes]

You could have saved yourself all that writing if you just posted a before/after dyno run instead Your objective opinion is also nice though.

[R32DBP]

Originally Posted by harkes

You could have saved yourself all that writing if you just posted a before/after dyno run instead Your objective opinion is also nice though.

I could've done that but unfortunately I never had the car dyno'd before. I may have it dyno'd now after the tune but meh. I'm happy with the power and I'm sure it will put down its claimed power. If there is a sale on a dyno session I may get it done. I'm just enjoying the car now as its my daily. My fun/project/track car is my R32 Turbo anyways.

[F80Boost]

Originally Posted by R32DBP

I could've done that but unfortunately I never had the car dyno'd before. I may have it dyno'd now after the tune but meh. I'm happy with the power and I'm sure it will put down its claimed power. If there is a sale on a dyno session I may get it done. I'm just enjoying the car now as its my daily. My fun/project/track car is my R32 Turbo anyways.

Can you post a vid of acceleration ? 0-60
60-80 etx ?

[chutak]

Sounds awesome! Did you get the stage 1 or 2 tune? I really wish there were tuners like Enzo and GSR closer to the DC area.

[R32DBP]

Originally Posted by F80Boost

Can you post a vid of acceleration ? 0-60
60-80 etx ?

I will definitely do that. I have the P3 gauge as well as the M Performance Steering wheel with LED to get 0-60 times.

Originally Posted by chutak

Sounds awesome! Did you get the stage 1 or 2 tune? I really wish there were tuners like Enzo and GSR closer to the DC area.

I don't think they really have different stages to their tune. It is more so just a custom map to your modifications. I know for the VW world a downpipe and tune would classify the car being stage 2. So to me its stage 2 tune haha. You can always ship out your ECU to Enzo and he can map your car like that. While I was there two ECUs actually came in for him to tune. Or just take a nice drive to Long Island, DC isnt toooooo far away haha.

[R32DBP]

Originally Posted by ROBNYC

R32DBP Congrats!
Will be inviting you to the drag-strip meet/roll-out 1 of these nearby friday evenings, along with other 335's, M235, 228, 535, 550, X3's and hopefully some M's.

Welcome to the EnzoTuned crew!

Thanks! What drag strip do you guys roll out to? If I can make it I'd definitely like to swing by and check it out.

[R32DBP]

Originally Posted by ROBNYC

Fun to see how your 335 is against shivaswrath 335 EnzoTuned as well and other 335 with piggybacks =D

We go to Island Dragway (the back roads getting there after highway exit are INSANE FUN) they open from 7-11:30pm.
Been contemplating to go to Raceway in Englishtown but they're open from 6-10 i think and I hear they're usually jammed packed.

I'm sure shivaswrath might have the edge as he has FBO (Dinan Intake/ER CP vs my BMC Drop-in/Stock CP) Either way I would be interested in making the trip if I am free. Both tracks are about an hour away from me.

[Crashnbrn5]

STill waiting on videos, please hook us up. We need to see it so we can all go to Enzo and make some horses

[CJ0920]

Originally Posted by chutak

I really wish there were tuners like Enzo and GSR closer to the DC area.

There is Tuning Tech in MD...talk to Frank Smith. They offer both a piggy back and a ecu flash.

[R32DBP]

Ahh wish I could make it this friday. But I'll be tied up. Thanks for the heads up ROBNYC

[shivaswrath]

Originally Posted by ROBNYC

R32DBP shivaswrath you guys are ready for this Friday Oct 9th?

I'm out of town this weekend for work, was so annoyed with the rain on 10/2 for this reason!

[PabloK]

I have my car coded.

Will my new enzo tune clear my coding?

Thanks

[G30 B58]

Originally Posted by ROBNYC

All good we're on for the following week too

FUDGE!!!

I'm hosting an S2000 meet at my place that whole weekend.



That Sat./Sun. @ Pocono: http://www.slipstreamre.com/ecco-rol...aceway-roster/

FYI

[IndotagSwizz]

[QUOTE=R32DBP;18625328]I gotta give it up to Enzo for creating a beast of a tune on my car and his team for the hospitality they showed me while I waited. If you are local to his shop, I suggest you get his tune done ASAP. Being able to fully manipulate the timing, ignition, etc parameters to tune the car is honestly the way to go on this car. My car took a bit longer than expected tuning as Enzo kept seeing something he didn't like when tuning and he kept road testing and road testing it til he got it perfect. Enzo's attention to detail to his tune is impeccable. This is no off the shelf tune, which is what I am used to in the VW world for my R32 turbo. He was out for about 3 hours back and forth trying to perfect the tune and I was completely fine with it because I knew it was in good hands.

Like I said, if any of you are in the tri state area I'd suggest you get the tune ASAP. Even if you're too far away just ship the ECU in. You will not be disappointed with it.

I installed a P3Cars Digital Boost gauge before I got the tune and was seeing about 7-9psi on the car stock., with the higher psi level in Sport+ mode. After the tune I'm now around 15psi and it's honestly a different car. It is such a fun drive now especially rowing through the gears and taking corners. I don't have much pics of my car getting tuned but I do have pics of the shop, which is such a clean shop. You will not be disappointed. I will be doing a full video shoot of the car soon and will be sure to get some driving videos up here soon. Until then here are some pics of the shop and my dirty car in one of the pics haha.


you said he had to drive the car a couple of times because there was something he didn't like, so if I ship my ECU how will they know whether they got it right or not??

[R32DBP]

Originally Posted by ROBNYC

Whats up bro how's the car doing?

Hey what's up. Cars doing good! Around 5k miles on my setup and no complaints at all. Always has the power I want/need. Would definitely like to see what it puts down on the dyno. I installed a ER cp since my last update and not sure if I feel a difference power wise but piece of mind is at ease now that the stock plastic piece is out haha

[ronanz]

Originally Posted by R32DBP

Hey what's up. Cars doing good! Around 5k miles on my setup and no complaints at all. Always has the power I want/need. Would definitely like to see what it puts down on the dyno. I installed a ER cp since my last update and not sure if I feel a difference power wise but piece of mind is at ease now that the stock plastic piece is out haha

Not much for power gains, but definitely one of the best peace of mind mods money can buy!

.

[CIWS]

Originally Posted by ronanz

Not much for power gains, but definitely one of the best peace of mind mods money can buy!

.

It's all about filtering through the weak link(s) to enjoy the mods.

(should have the rear diffuser and mirror caps installed tomorrow)

[R32DBP]

Originally Posted by ROBNYC

Nice! I followed u on IG, add me on FB if u want, I have all the other Tri-state guys EnzoTuned on FB, we're going to set up a Dynojet session soon with a good pricing so lets stay in touch so u can join us. So far Luminous posted on M235 section his numbers stock and after and its better than the piggybacks haha

+1 agreed lol

Awesome. Lmk what you plan up. Sorry I haven't been able to come to the Friday night drag runs. Usually busy on weekends. Plus I'm trying to finish my other project car as well. The 335i is just my fun daily.

Where would you plan to have the dyno day at?

[FSociety]

Originally Posted by R32DBP

Awesome. Lmk what you plan up. Sorry I haven't been able to come to the Friday night drag runs. Usually busy on weekends. Plus I'm trying to finish my other project car as well. The 335i is just my fun daily.

Where would you plan to have the dyno day at?

NJ or Long Island