[wwc310]

Hi everyone,

I am new to coding and had about 50% success. I was able to code the CAS and CIC modules but received the following errros whenever I attempted to code Kombi or FRM. Please see below. Any input would be greatly appreciated. Thank you


ERROR! Modul: LFCDHDIA.CPP (A_PL2FRX.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
COAPI-2000: EDIABAS or SGBD error
BIP-0009: Faulty BEST version of description file

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERINDEX_LESEN

>> ERROR! Modul: COAPI.CPP, Proc: coapiReadCodierIndexFromSg, LineNr: 05, ErrorNr: 2000
CODIERINDEX_LESEN: A_PL2FRX

>> ERROR! Modul: LFCDHDIA.CPP (A_PL2FRX.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
BIP-0009: Faulty BEST version of description file

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERDATEN_LESEN

ERROR! Modul: LFCDHDIA.CPP (A_PL2FRX.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
COAPI-2000: EDIABAS or SGBD error
BIP-0009: Faulty BEST version of description file

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERINDEX_LESEN

>> ERROR! Modul: COAPI.CPP, Proc: coapiReadCodierIndexFromSg, LineNr: 05, ErrorNr: 2000
CODIERINDEX_LESEN: A_PL2FRX

>> ERROR! Modul: LFCDHDIA.CPP (A_PL2FRX.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
BIP-0009: Faulty BEST version of description file

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERDATEN_LESEN

[wildcatcrazy69]

What version of datens are you using?

[wwc310]

Originally Posted by wildcatcrazy69

What version of datens are you using?

53.3 do you think this is the problem? Thank you for the response

[wildcatcrazy69]

Originally Posted by wwc310

53.3 do you think this is the problem? Thank you for the response

Depends if the dealer or anyone updated those modules with a newer update. Once a module has been updated with a newer version, you will have to upgrade to at least that version.

[wwc310]

Originally Posted by wildcatcrazy69

Depends if the dealer or anyone updated those modules with a newer update. Once a module has been updated with a newer version, you will have to upgrade to at least that version.

How I check to see what modules the dealer might have updated. Sorry for the noob questions. I've been trying to piece this together from scattered information on about 5 different forum sites.

[wildcatcrazy69]

Originally Posted by wwc310

How I check to see what modules the dealer might have updated. Sorry for the noob questions. I've been trying to piece this together from scattered information on about 5 different forum sites.

Open INPA, select your chassis then Functional Jobs. Then, UIF. That will show you the date the module was last updated.

[gabylonfive]

sounds like the module has a newer ZUSB than you have available. As someone posted earlier, you probably need a newer set of datens.