[notnow]

Location: Vancouver, BC

Parting out.

*No trades. No lowballs. No shipping.*
*More you buy, more discount you get*

2. 19" Varrstoen ES112 LM replicas, aggressive specs
F 19x9.5 ET20 /// R 19x11 ET25

**Comes with 5 wheels, 1 was slightly damaged and replaced (not curbed, chipped at a couple spots). 3 fronts, 2 rears**
Wheels have seen less than 5000km, 1 is brand new.

Hankook V12's and Achilles ATR sport (Hankooks have less than 5000km, Achilles have around 75%. No excessive camber wear, just the usual BMW wear - car has always been aligned to factory standards.)
225/35/19 in the front
265/30/19 in the rear

Perfect tire size, width and offsets for a stanced look. In fact, largest tires you can fit without shaving rear fenders and getting aftermarket camber/toe arms for F/R. (please do your own research on how to fit these, lowered e90's should have no problems fitting these with rolled fenders and close to oem camber. lowered e92/e93 will need max rear camber (safe) and rolled fenders.)

Asking for $1800 for everything, 5 wheels, 4 tires. BONUS: 20x Open ended lug nuts and Varrstoen center caps
Optional: $50 for red CF BBS center caps

Original price:
$1300USD + TAX = $1625 CAD /// Tires + Tax = $680 CAD
Mounting and balancing stretched tires = $220CAD after discount
Total = $2525 + storage fees, higher end valve stems and caps.

3. E92/E93 M3 style Side skirts + CF Platte Form Splitters (forgot actual name, will find out soon)

These are my second set of m3 side skirts and splitters, my first set of side skirts had 8/10 fitment whereas this set has 10/10 on one side and 9.9/10 on the other.
The first set of splitters did not line up with the side skirts so gaps were visible everywhere and it sagged - these ones line up perfectly and sits flush with the edges.

I'm only using 2 or 3 of the bottom mounting holes per side which is enough to hold it properly - the rest are clips and interior bolts (which are fully used).

One side of splitters have a couple nicks, original price of these splitters are over $1200.
Not to be confused with those that are made for the longer OEM M3 skirts, these are rare.

Easy fixes for the splitter nicks:
- Wrap the thickness of the splitter, the nicks are only on the thickness, not the length.
- Plastidip/paint
- Leave it, only visible at certain angles under direct sunlight.

$650 for just splitters.
$950 for both the skirts and splitters, not splitting just the side skirts.

4. E92 AC Style Roof spoiler (in BSM, however more like a mix between jet black and BSM. Paintwork is top notch.)
- perfect fit
- no damages

$100

5a.Duke Dynamic Quad Carbon Fiber Diffuser with Fins
*Edit* Realized I had an installation error which gave a small gap.
After fixing it, it's actually a perfect fit.

Diffuser fitment is best one I received, 10/10.

$500

5b. Muffler delete (Straight pipes) with Cyba black chrome quad tips
Goes with the diffuser only

Yes it drones around 2.2k RPM and I absolutely love it - I would keep the RPM there just to listen to it.
Yes it burbles.
Underground acceleration is unreal.

I'm in love with drone and noise so PE was considered too tame for me.

+$120 to diffuser price.

6. HID H8 Conversion Kit with 5500K bulbs. For Angel Eyes or Fog lights
- Can swap out the 5500k bulbs for 8000k bulbs if you want a hint of blue.
- Brighter than LED angel eyes
- Lights up the outer ring better than any LED kit (imagine a larger "viewing angle" on TVs and better visibility under sunlight)
- Do your own research, coding is required for this.

PRICE DROP FROM $60 to $40
*Interior LED Kit, turn signals, HID kit bundle for $100*

7. Interior LED Kit
- 4x LED (2x for under doors, 2x for footwell)
- 2x LED board (one for front dome light, one for rear)

$50
*Bundle with below for $65 total*
*Interior LED Kit, turn signals, HID kit bundle for $95*

8. LED turn signals
- 2x white LED headlight turn signals
- 2x white LED fender turn signals

$40
*Bundle with above for $65 total*
*Interior LED Kit, turn signals, HID kit bundle for $95*

Never mounted CF m3 hood for the pre-lci e92/e93
**SOLD**
18" BBS CH style w/ winter tires, carbon fiber BBS emblem
**SOLD**
Complete JB3 kit
**SOLD**
BMS DCI
**SOLD**
19" BBS LM-R style w/ PSS tires
**SOLD**
CF ACS Roof Spoiler
**SOLD**
OEM BMW performance exhaust with welded cyba quad tips
**SOLD**
AFE Intake
**SOLD**

Side skirts, diffuser, wheels, etc etc



Roof spoiler:

[headhunterz]

The LCI tails forsale? I'm interested in those.

[SAAJALI]

Any pics of the M3 hood ?

[notnow]

LCI tails will be the last to be sold
Will post pics soon

[AudiBLK]

Dibs on JB4 and downpipe

[notnow]

Wheels are off and ready for pickup.
Side skirts will be removed this week or the next.

Prices are OBO, more you buy the better the deal.

[the_firm]

Pics of m3 hood ... also would you ship to j7j1s9?

Thanks

[boo5t3d]

You willing to ship the hood?

[notnow]

Sorry not shipping atm.

Price drop bump

[headhunterz]

Still interested in the LCI tails... and maybe downpipes

[the_firm]

Ok if you change your mind for shipping please let me know

[notnow]

LCI tails will be sold at the end.

Probably won't be shipping the hood unless you organize a company to pick it up, package it and ship it for me. I don't have any type of vehicle that can fit the hood in.

Exhaust added as well*

[notnow]

bump

[soursamo]

Interested in the JB4 if you'll ship to Kelowna!

[notnow]

bumppp

[notnow]

bump

Ordered a replacement for the varrstoen wheels, you will get 5 wheels.
Not in a hurry to sell the wheels anymore as my next car can make use of them.
Price increased due to "fixing" the wheel.

Dropped the price on the hood and side skirts.

[bimmette]

What's your next car, wonton?

[notnow]

Sorry everyone, I've been away, please resend the PM's if still interested in part(s).

[MiKc]

pm'ed for hood

[j_e46]

Are you selling your car?

[SAAJALI]

A pic of the hood would be awesome man

[trickystar]

yup, would like to look at pictures of the hood aswell, thanks