|
|
|
|
PLEASE HELP SUPPORT E90POST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
blitz technospeed z1 fitment options
|
|
Wheels and Tires forum Sponsored by The Tire Rack
Please help to directly support e90post by doing your tirerack shopping from the above link. For every sale made through the link, e90post gets sponsor support to keep the site alive. Disclaimer |
|
Thread Tools | Search this Thread |
09-27-2014, 03:39 PM | #1 |
Private
4
Rep 74
Posts |
blitz technospeed z1 fitment options
My buddy has about 4 or five sets of these wheels
He thought the rears were 19x10 et22 but we found out bozz performance changed them to a 10.5 inch wheel inside lip to inside lip. they r actually 11 wide outside to outside with about a 6.5 inch backspace. A little less. Question 1. Woild that deep of a backspace work? I put them on and it was fairly close to the susoension with the susoension drooped down Option 1 for me is those rears with 19x9 et45 up front which id need a spacer for Option 2 is 18x9 squared w et45 offset. With this offset for the front would I be able to run a spacer that is a 114.3 to 120 adapter? Are there 15-20 mm adapter spacers Option 3 18x8.5 et45 front and 18x9 et45 rear Drive hard so id like to have good looks and not have to drive slow everywhere |
09-28-2014, 09:55 AM | #4 |
Major General
223
Rep 5,120
Posts |
The 10.5 wheel is around et26-30. If you don't mind putting some work in that is perfect but it is not a bolt on fitment. You'll need to roll your fenders and trim some metal where the rear bumper and fender meet.
http://www.tyresizecalculator.com/ty...ace-calculator 9"et45 will be flush up front with an 18-20mm spacer. |
Appreciate
0
|
09-28-2014, 10:24 AM | #5 | |
I got lei'd
845
Rep 7,594
Posts |
Quote:
|
|
Appreciate
0
|
09-28-2014, 12:55 PM | #6 |
Private
4
Rep 74
Posts |
He has a few supras. He was gonna put the 10.5 on his widenody but they were to narrow so he just put them in his closet. He said he wants to make a coffee tsble out of them lol.
He alternates the other sets on his other cars amd has a couple sets collecting dust. I can see if he wants to sell. I think hes letting a friend put the 8.5 on an nsx |
Appreciate
0
|
09-28-2014, 01:54 PM | #7 | |
I got lei'd
845
Rep 7,594
Posts |
Quote:
|
|
Appreciate
0
|
09-28-2014, 06:50 PM | #8 |
Private
4
Rep 74
Posts |
Cali
This question is probably stupid but I can't figure it out. I measured the centers and they seem the same but does a 18x8.5 et45 center face have the same center face dimensions as a 19x9 et 45. I have 6 wheels here now and want to take the 8.5 et45 centers off the barrels and put them on the other 9" barrels so I can run a square size and rotate wheels. I have one matching set of 4 faces that are black but are 8.5 and 9" the other 2 wheels are 9" wide with silver faces. So can I put the black faces off the 8.5 onto the 9 and all 4 be the same |
Appreciate
0
|
Bookmarks |
|
|