PROcede V2 2.0.2 at 94%

NPDAN · 12-14-2007, 09:03 PM

All I can say is "HOLY SHIT"!!!!!!!!

gobo335i · 12-14-2007, 09:04 PM

I thought you were running 100% across the board? Are you creeping up from the stock map?

sflgator · 12-14-2007, 09:04 PM

Quote:

Originally Posted by NPDAN

All I can say is "HOLY SHIT"!!!!!!!!

That's exactly where I have it (running on 93 octane)...94% across the board, baby!!!

My datalogs show max of 14.7psi.; I wonder if I could go just a tad higher to 95-96%?

pikkashoe · 12-14-2007, 09:06 PM

Sflgator, you got yours to 94% nice, 15 psi boost stable.

NPDAN · 12-14-2007, 09:06 PM

Quote:

Originally Posted by gobo335i

I thought you were running 100% across the board? Are you creeping up from the stock map?

F Nooooooo not on 2.0.2 I was on 2.0.1.....

NPDAN · 12-14-2007, 09:07 PM

Quote:

Originally Posted by sflgator

That's exactly where I have it (running on 93 octane)...94% across the board, baby!!!

Filler up with 100 Octane..... I love it

stillclaimndp · 12-14-2007, 09:07 PM

i gotta datalog mine again when i get back from WA, make sure it's hittin the right boost... the logs i was posting most recently were from 335vince's car, i wanna make sure im at the 15psi party~

cn555ic · 12-14-2007, 09:08 PM

At 94% does the low end torque increase a little more than the the original 90%

gobo335i · 12-14-2007, 09:08 PM

so with 2.02 you are running it lower. Can you go to 100% with your 100 octane and still wring it out?

Damn, when is my harness coming

NPDAN · 12-14-2007, 09:08 PM

Quote:

Originally Posted by cn555ic

At 94% does the low end torque increase a little more than the the original 90%

Big Time.....

sflgator · 12-14-2007, 09:09 PM

Quote:

Originally Posted by pikkashoe

Sflgator, you got yours to 94% nice, 15 psi boost stable.

Yes, no spikes at all; well, 1 small one to 14.9psi during one recorded run...but that's not really a spike.

NPDAN · 12-14-2007, 09:09 PM

Quote:

Originally Posted by gobo335i

so with 2.02 you are running it lower. Can you go to 100% with your 100 octane and still wring it out?

Damn, when is my harness coming

We've been strongly advised NOT to do that...

335vince · 12-14-2007, 09:09 PM

I think i'll try 94% on 93.5 octane soon!

gobo335i · 12-14-2007, 09:10 PM

all this talk is finally getting to me. WHERE IS MY HARNESS!

ugh.

dan is the man.

NPDAN · 12-14-2007, 09:10 PM

Quote:

Originally Posted by 335vince

I think i'll try 94% on 93.5 octane soon!

Feels way stronger man...

cn555ic · 12-14-2007, 09:12 PM

ALright because i heard that the torque compared to the V2.01 is significantly reduced, but if i bump the V2.02 12-11 map up to 94 or so it will feel similar to the torque of the V2.01...If its slightly off i can live with that, but if its a noticable difference i will be kind of disppointed for i like the feel of the low end torque. If this is the case i guess i have to deal with it till V2.03

335iheLLraiseR · 12-14-2007, 11:06 PM

NPDAN, glad your happy.

i was going to post this in my data log thread, but since we already here AND talking about 94%, might as well. Shiv mentioned to log a 3rd gear pull, so did, but i'm a little stumped at the log. i still like 2.01 better and haven't seen that much of a noticeable difference yet.

j|rz44 · 12-14-2007, 11:18 PM

^that cant be right...
boost is too low..
also, how do you get your speed to log?

thx

NPDAN · 12-14-2007, 11:19 PM

On a different thread, Shiv just gave the thumbs up on going 100% with 100 octane... You know what that means

335iheLLraiseR · 12-14-2007, 11:28 PM

Quote:

Originally Posted by jmramos44

^that cant be right...
boost is too low..
also, how do you get your speed to log?

thx

its available in the software once you disable the speed limiter.

and the boost WAY to low.

j|rz44 · 12-14-2007, 11:41 PM

Quote:

Originally Posted by 335iheLLraiseR

its available in the software once you disable the speed limiter.

and the boost WAY to low.

dam.. i needed to connect the old green loom eh?
i dont really care about going 150, just would like to log some speeds!

next time

335iheLLraiseR · 12-14-2007, 11:44 PM

Quote:

Originally Posted by jmramos44

dam.. i needed to connect the old green loom eh?
i dont really care about going 150, just would like to log some speeds!

next time

well worth it, its very informative. i had the same reasons for intalling as you.

12-14-2007, 09:03 PM	#1
NPDAN Colonel 95 Rep 2,573 Posts Drives: AW DCT M3 Join Date: Feb 2007 Location: So.Cal iTrader: (7) Garage List 2008 E92 M3 [8.00] 07' E92 335i [0.00]	PROcede V2 2.0.2 at 94% All I can say is "HOLY SHIT"!!!!!!!! __________________
	Appreciate 0 Tweet Quote

12-14-2007, 09:04 PM	#2
gobo335i Toy Wrangler 11 Rep 193 Posts Drives: 135i - GoCart on Steroids Join Date: May 2007 Location: Los Angeles, California iTrader: (0)	I thought you were running 100% across the board? Are you creeping up from the stock map? __________________ Had a 335i. It was a highway missile. Traded to a 135i. It's a go-cart on steroids.
	Appreciate 0 Quote

12-14-2007, 09:06 PM	#4
pikkashoe Major 56 Rep 1,239 Posts Drives: 2007 BMW 335 Coupe Join Date: Feb 2007 Location: Miami, FL iTrader: (1)	Sflgator, you got yours to 94% nice, 15 psi boost stable. __________________ 2007 E92 AW/Coral Red/Alumin, 6 speed manual, ZSP, PROCEDE V3.1, Factory Short-Throw Knob, Bms Filter. 12/7/07 - 12.84 @ 109.36
	Appreciate 0 Quote

12-14-2007, 09:07 PM	#7
stillclaimndp Dancing Machine 47 Rep 1,419 Posts Drives: 335i e90 ZSP Join Date: Aug 2007 Location: Walnut Creek, Ca iTrader: (0)	i gotta datalog mine again when i get back from WA, make sure it's hittin the right boost... the logs i was posting most recently were from 335vince's car, i wanna make sure im at the 15psi party~ __________________ 2007 e90 & 1981 Corvette Predecessors: 2007 BMW 335i E92, 2006 M5, 2008 Viper SRT10 Coupe, 2005 Viper Yellow, 2006 Corvette Z51, 2009 Challenger SRT8, 2006 S4, 2001.5 Nogaro Blue S4, 2006 GTI w/ DSG, 06 Evo IX, 04 S4, 04 911x51, 03 Evo VIII, 98 Eclipse GSX, 96 GST, 92 Galant Vr-4, '70 Grand Prix Model J, '70 Nova, '68 Firebird
	Appreciate 0 Quote

12-14-2007, 09:08 PM	#8
cn555ic 441 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	At 94% does the low end torque increase a little more than the the original 90%
	Appreciate 0 Quote

12-14-2007, 09:09 PM	#13
335vince Private 6 Rep 74 Posts Drives: You Crazy Join Date: Jul 2007 Location: Oakland CA iTrader: (2)	I think i'll try 94% on 93.5 octane soon!
	Appreciate 0 Quote

12-14-2007, 09:10 PM	#14
gobo335i Toy Wrangler 11 Rep 193 Posts Drives: 135i - GoCart on Steroids Join Date: May 2007 Location: Los Angeles, California iTrader: (0)	all this talk is finally getting to me. WHERE IS MY HARNESS! ugh. dan is the man. __________________ Had a 335i. It was a highway missile. Traded to a 135i. It's a go-cart on steroids.
	Appreciate 0 Quote

12-14-2007, 09:12 PM	#16
cn555ic 441 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	ALright because i heard that the torque compared to the V2.01 is significantly reduced, but if i bump the V2.02 12-11 map up to 94 or so it will feel similar to the torque of the V2.01...If its slightly off i can live with that, but if its a noticable difference i will be kind of disppointed for i like the feel of the low end torque. If this is the case i guess i have to deal with it till V2.03
	Appreciate 0 Quote

12-14-2007, 11:18 PM	#18
j\|rz44 Lieutenant Colonel 43 Rep 1,683 Posts Drives: 335i\|E92 Join Date: Oct 2006 Location: Lost iTrader: (2) Garage List 07 335i [0.00]	^that cant be right... boost is too low.. also, how do you get your speed to log? thx __________________ Life is Good
	Appreciate 0 Quote

12-14-2007, 11:19 PM	#19
NPDAN Colonel 95 Rep 2,573 Posts Drives: AW DCT M3 Join Date: Feb 2007 Location: So.Cal iTrader: (7) Garage List 2008 E92 M3 [8.00] 07' E92 335i [0.00]	On a different thread, Shiv just gave the thumbs up on going 100% with 100 octane... You know what that means __________________
	Appreciate 0 Quote