08-31-2020, 01:42 PM | #1 |
Enlisted Member
4
Rep 37
Posts |
Change color ambient
Hello,
I can changed the color ambient in my 118i F40, now the color bronze is red. BDC module > Expert coding > 360A LicLciColorLibrary > LIC_LCI_COLOR_LIBRARY_DATA >UNK_PARAM_18 (selected option) > Custom value Byte 13 14 15 : D7 6E 14 to FF 00 00 Byte 18 19 20: D7 6E 14 to FF 00 00 Original RGB hex codes are: 90,E0,90 - WHITE D7,6E,14 - BRONZE 93,1A,01 - ORANGE 00,20FE - BLUE 10,FE,32 - GREEN 78,3C,FE - LILAC you must change the bits of the color you want to change, they are two series of 3 bytes, as in the previous example. |
09-01-2020, 01:21 PM | #5 |
Private
102
Rep 94
Posts |
Just done this, so I have red now (wording is still bronze).
There must be a way of having footwell lights on while driving like in a Golf R - which were blue, I added blue bulb, and variable brightness also. I saw carpet light in expert mode but there's too many settings to experiment! |
Appreciate
1
MrFoxy376.50 |
09-01-2020, 01:49 PM | #6 | |
Enlisted Member
4
Rep 37
Posts |
Quote:
Yes, the name of the color and the color as such in the idrive display, I don't know if it can be changed, I'll investigate. Regarding the light of the mat, it's interesting, I'm going to fiddle a bit to see what I find |
|
Appreciate
1
MrFoxy376.50 |
09-01-2020, 01:52 PM | #7 | |
Enlisted Member
4
Rep 37
Posts |
Quote:
|
|
Appreciate
0
|
09-01-2020, 04:30 PM | #8 |
Private
102
Rep 94
Posts |
No, the blue bulb I changed was in a previous VW Golf R, a car where the footwell lights were always on, with variable brightness adjustment.
I feel there's a way to code our BMW footwell lights on all the time, but the options in expert mode are very many so we need to really know which settings to actually code. The footwell lights are white but I'm sure we could find some different colours, like blue or red, maybe on Ali Express. That's where I bought my M logo door lights, which are exactly the same light size & fitting as the footwell and boot lights |
Appreciate
1
dominguez2554.00 |
09-09-2020, 12:25 PM | #9 |
Registered
0
Rep 4
Posts |
Hey.
i have just given this a go and changed bronze to red, when it did it it did the restarting ecu, but it did not restart, like i have seen with others. it then popped up with side light failure. Did yours do this? |
Appreciate
0
|
09-09-2020, 03:20 PM | #10 |
Enlisted Member
4
Rep 37
Posts |
|
Appreciate
0
|
09-09-2020, 03:31 PM | #11 |
Registered
0
Rep 4
Posts |
Hiya i did this
BDC module > Expert coding > 360A LicLciColorLibrary > LIC_LCI_COLOR_LIBRARY_DATA >UNK_PARAM_18 and these bytes 13 14 15 / 18 19 20 43 44 45 / 48 49 50 I have now had the car on in the dark and the DRL's work and all the other lights to. it also does not say anything when the car is started. So everything seems ok, just thought it was a bit odd. What is strange there is more than just "UNK_PARAM_18" there are a few and they are all matching the 18.. |
Appreciate
0
|
09-10-2020, 02:05 AM | #13 |
Car go brum
0
Rep 5
Posts |
I get that from time to time, I'd hazard a guess that the module is just restarted and the sensor just throws a wobbly. Goes away with a restart.
|
Appreciate
0
|
09-10-2020, 04:05 AM | #14 |
Registered
0
Rep 4
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|