10-25-2014, 10:24 AM | #1 |
Captain
113
Rep 934
Posts |
Carbon DCT selector fitting - JBSpeed
I recently purchased the carbon shifter from JBSpeed and today fitted it to my car. Overall am really pleased with it but wanted to call out a few words of caution.
Removal of the old one - I taoed the area and used a small jewellers screwdriver - it was very hard to get the old item out without actually leaving any marks on the plastic insert. I understand why IND sell there kit with a replacement insert. Also the OEM adhesive comes off very easily. It care has to be taken not to pull off the M logo on the shifter as if you carelessly pull the adhesive off the back then you can take the silver off the M leaving it not looking to great. Again I understand why a replacement is provided. Fitment is very good and overall the look is great. Here are the pictures [/URL Last edited by phantome46; 10-25-2014 at 10:36 AM.. |
11-01-2014, 05:30 AM | #4 |
Captain
113
Rep 934
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|