04-11-2024, 06:57 PM | #1 |
Private First Class
135
Rep 157
Posts |
NYS Inspection with single turbo kit?
Hello All,
I'm highly considering going to a single turbo setup BUT live on Long Island, NY where emissions/inspections tend to be a hassle. I was curious if anyone in the area is running a single turbo kit and has been able to pass inspection. I daily drive my car so this will be a big make or break it when it comes to going forward with the kit. (You can't just go out and buy an inspection sticker anymore so I'm expecting this to not work out LOL) To my understanding - O2's and Cats must show "readiness" in order to pass. I'm curious if anyone has found a way to bypass this with a ST setup as I'd imagine it's probably not in the motors best interest to go back to a stock tune without stock dp's & turbos. All insights are greatly appreciated. Drive safe, I look forward to reading the responses!
__________________
Previous 2011 6MT Stripper build -
https://www.m3post.com/forums/showthread.php?t=1645537 2018 6MT F80 build underway.. |
04-11-2024, 10:56 PM | #2 |
Lieutenant
419
Rep 547
Posts |
No emissions where I am but given the amount of changes I can't imagine it would pass. Maybe with some work you could do a catted downpipe with o2s in the manifold but you will have probably different injectors ect. Which will require a tune.
I haven't had my st setup running long enough to weigh in on daily driveability or reliabilty but I don't think I would do it to my daily. |
Appreciate
0
|
04-11-2024, 11:08 PM | #3 | |
Private First Class
135
Rep 157
Posts |
Quote:
As far as driveability/reliability - planned on staying very conservative and pump 93 only, don't have the desire to be at 700whp+
__________________
Previous 2011 6MT Stripper build -
https://www.m3post.com/forums/showthread.php?t=1645537 2018 6MT F80 build underway.. |
|
Appreciate
0
|
04-12-2024, 02:23 PM | #4 |
Private First Class
135
Rep 157
Posts |
B
__________________
Previous 2011 6MT Stripper build -
https://www.m3post.com/forums/showthread.php?t=1645537 2018 6MT F80 build underway.. |
Appreciate
0
|
04-17-2024, 11:02 PM | #5 |
New Member
10
Rep 22
Posts |
I have a brand new big boost efr kit for sale that I was gonna put on my f80. Unfortunately I daily drive the car and would rather not deal with the headache of emissions on a st setup every year
|
Appreciate
0
|
04-18-2024, 01:30 PM | #6 | |
pxscu
12
Rep 25
Posts |
Quote:
with my custom tune on stock turbo I only had one pending code which I'd imagine still looks the same with single bank enabled.
__________________
2015 F80 M3 - BigBoost 8474 EFR Single Turbo / EU5 Injectors / Precision Stage 3 Brushless LPFP / Dorch Lift Kit / Wagner Cooler https://www.instagram.com/pxscu/ |
|
Appreciate
0
|
04-22-2024, 07:15 PM | #7 |
Private First Class
135
Rep 157
Posts |
In the same boat, will definitely be a headache - tried to reach out to single turbo owners & no responses
__________________
Previous 2011 6MT Stripper build -
https://www.m3post.com/forums/showthread.php?t=1645537 2018 6MT F80 build underway.. |
Appreciate
0
|
04-22-2024, 07:17 PM | #8 | |
Private First Class
135
Rep 157
Posts |
Quote:
Let me know how it goes when you get the car back!
__________________
Previous 2011 6MT Stripper build -
https://www.m3post.com/forums/showthread.php?t=1645537 2018 6MT F80 build underway.. |
|
Appreciate
0
|
04-25-2024, 06:49 AM | #9 |
mTekMods
2157
Rep 2,909
Posts |
NYS allows no active engine codes, you can have 1 monitor not ready. usually these cars do not pass in nys with dp and bm3.
__________________
2011 Frozen Black/Fox Red E90 M3 650+WHP
G-Power Supercharged First DCT to Manual Conversion Worldwide KW CS, BBS RI-A, BW Headers, Snow 2.5 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|