|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
need help/advice
|
|
02-14-2012, 09:11 PM | #1 |
Lieutenant
20
Rep 421
Posts |
need help/advice
so i want to fix the paint on my car, fill in the front license plate holes (probably have to repaint the bumper), and install a clear bra on the hood and front bumper. My question is in what order do i want to go about doing this?
thanks |
02-14-2012, 09:32 PM | #4 |
Enlisted Member
1
Rep 44
Posts |
I guess I'm not following what you're asking.
If I wanted to fill holes in my bumper I would do the following: Fill with a plastic filler. Sand with rough finish sand paper. Sand with finer finishes (Usually 2X more sessions) until I've reached 800+ grit. Take the bumper to a shop or a friend to have sprayed. I would ensure at this time that they were doing a good job of blending the new paint with the old. Wet sand the new paint. Take back to shop to have clear coat sprayed. Wet sand the new clear coat. Detail. Apply the clear bra. |
Appreciate
0
|
02-14-2012, 09:39 PM | #5 |
First Lieutenant
6
Rep 344
Posts
Drives: 09 E93 CR.
Join Date: Jan 2012
Location: Orlando/Fort Lauderdale, FL
|
paint first, clear bra after, detail last. this is the logically thing to do.
__________________
All Body work/ mechanical repairs/details/car sales. Located in Fort Lauderdale, FL.
jtilako7 -->Instagram |
Appreciate
0
|
Bookmarks |
|
|