08-11-2018, 08:25 PM | #1 |
Banned
4495
Rep 10,473
Posts |
OK. So $1,000,000 is ridiculous. These are just taking up space in my garage. 2020 Garage Cleaning. Willing to take reasonable offers. S3 2 piece wheels Purchased new for $8,570. $10k with tires. 6061-T6 Forged Aluminum Hand Brushed Candy Black and Gloss Clear Finish. Exposed Gloss Black Hardware 19x9 ET 35 Front 19x10 ET 42 Rear MPSS 245/40/19 8/32" Front MPSS 275/35/19 6/32" Rear formerly on a F30 lowered way too far right now. About Velos S3: http://www.velosdesignwerks.com/whee...forged-wheels/ For reference, the wheels are same at 437m at 19" with front at 9.0" and rear at 10.0" ET in front is 35mm where 437m (and 666m) are 29mm, a difference of 6mm inward. If you feel this is an issue (it's not), you can use a 5mm spacer to make up the difference. There is only 2mm difference in rear to 437m and 666m at 42 ET VS 40 ET. The Front Drivers wheel has curb rash. Velos says they can rebuild as new for $695 (Nice part of the 2 part Design). You might have a repair place that can do it locally for less. Or they can repair and change finish of all 4 for $1500. Your choice. You can end up with an essentially new set of Velos S3, normally $10k, for $1500 + what we agree on. Again, only reason doing this is I need to clear room in the garage! I'd like to get my Bimmer back in there! Last edited by IK6SPEED; 01-04-2020 at 05:04 PM.. |
08-11-2018, 08:46 PM | #2 |
Major General
2469
Rep 5,458
Posts
Drives: F30
Join Date: Oct 2017
Location: Stevenson, WA
|
These are way outta my league but Im wondering... how much does an ultra high end aluminum wheel like this weigh in 19" ?
|
Appreciate
0
|
08-11-2018, 08:50 PM | #3 | |
Banned
4495
Rep 10,473
Posts |
Quote:
They are much more common on F80 thread. But posting here for a 1 in a million chance as these are rare 19” versions. As for weight, no idea. Here’s where they measured 20x11 in another thread. I obviously would assume 19” 9.5 and 10.0 to be lighter. https://www.2addicts.com/forums/show....php?t=1114603 Last edited by IK6SPEED; 08-11-2018 at 11:11 PM.. |
|
Appreciate
0
|
08-12-2018, 11:27 AM | #5 | |
Banned
4495
Rep 10,473
Posts |
Quote:
The Velos Signature Series Wheel Collection of forged, concave profile, one-piece wheels offers a more aggressive and sporty look for luxury and exotic car applications while keeping factory like performance in mind. The Signature Series separates itself from our Solo Collection by introducing a more aggressive profile and maximum concavity for all applications. With additional weight reducing features the Signature Series is the ultimate selection in soon to be classic designs for your Luxury and Exotic Application. 6061-T6 Forged Aluminum Hubcentric Fitment CNC Machined to specific fitments designed for your application (BMW) Powder Coat Finishes OEM TPMS Compatible Concave Profile Stock photos of 1 Piece, not 2 piece. Same design without bolts Last edited by IK6SPEED; 08-19-2018 at 12:08 PM.. |
|
Appreciate
0
|
08-12-2018, 11:37 AM | #6 |
Private First Class
95
Rep 138
Posts |
Yes, I can read but concavity is subjective. I have read plenty of wheel manufactures descriptions that don't tell the full story. Plus the wheel in question is not the same as yours its a 1 piece.
The Velos Signature Series Wheel Collection of forged, concave profile, one-piece wheels offers a more aggressive and sporty look for luxury and exotic car applications while keeping factory like performance in mind. |
Appreciate
0
|
08-12-2018, 11:38 AM | #7 |
Major General
2469
Rep 5,458
Posts
Drives: F30
Join Date: Oct 2017
Location: Stevenson, WA
|
I thought you said they were two piece wheels?
|
Appreciate
0
|
08-12-2018, 11:39 AM | #8 |
Banned
4495
Rep 10,473
Posts |
They are. Same design on the outside. The bolts can be seen in OP.
Velos S3 are custom made for the BMW F2x/F3x/F8x platform and available in 1, 2 or 3 piece wheels. The exterior remains the same on each. Last edited by IK6SPEED; 08-12-2018 at 11:47 AM.. |
Appreciate
0
|
08-12-2018, 11:40 AM | #9 |
Major General
2469
Rep 5,458
Posts
Drives: F30
Join Date: Oct 2017
Location: Stevenson, WA
|
|
Appreciate
0
|
08-19-2018, 12:08 PM | #11 |
Banned
4495
Rep 10,473
Posts |
|
Appreciate
1
ProperBimmer231.00 |
08-19-2018, 05:33 PM | #13 | |
Banned
231
Rep 423
Posts |
Quote:
I've invested thousands of dollars over the years in higher end wheels, but would never do anything close to 10k for wheels and tires. I had buyers regret twice with bbs lm's and rs-gt's (which both were damaged badly on NY/NJ roads). After that it was it. |
|
Appreciate
0
|
08-19-2018, 05:34 PM | #14 | |
Banned
4495
Rep 10,473
Posts |
Quote:
Someone’s getting a bargain |
|
Appreciate
1
ProperBimmer231.00 |
08-19-2018, 05:43 PM | #15 | ||
Banned
231
Rep 423
Posts |
Quote:
|
||
Appreciate
1
IK6SPEED4495.00 |
09-01-2018, 03:51 PM | #17 |
Go Fast Dont Die!
407
Rep 472
Posts
Drives: '12 328i Sport 6MT
Join Date: Jul 2018
Location: Panama City, FL
|
Damn! beautiful wheels, I hope you still have these come November I just built the motor on my motorcycle so the bank account needs to recharge, funny how things work. I cant find anything when I have the money and as soon as I spend it a deal like this pops up everytime. oh life.
|
Appreciate
1
IK6SPEED4495.00 |
12-14-2018, 02:49 AM | #20 |
Banned
4495
Rep 10,473
Posts |
For reference, the wheels are same at 437m at 19” with front at 9.0” and rear at 10.0”
ET in front is 35mm where 437m (and 666m) are 29mm, a difference of 6mm inward. If you feel this is an issue (it’s not), you can use a 5mm spacer to make up the difference. There is only 2mm difference in rear to 437m and 666m at 42 ET VS 40 ET. Last edited by IK6SPEED; 12-14-2018 at 06:04 PM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|