10-01-2023, 03:48 PM | #1 |
Registered
0
Rep 1
Posts |
Bmw 116d f40 2020
Hi everyone
New to this forum . So let me Interduce my self . So I'm a mechanic for several years. Working on a wide range of cars . I am familiar with vcds which I currently use . And have used several other machines. I currently also use a autel 908 Pro. So I have brought this car a f40 bmw 2020 116d The car had left corner damage . Which resulted in nearly all the airbags being deployed. And also the pedestrian protection system going off popping the bonnet up . I have replaced everything now and managed to clear the codes all except a couple . These are related to the front pedestrian sensors. 9309AC - permanent - pedestrian protection system front left - resistance to high. 9309B2 - permanent - pedestrian protection system front right - resistance to high I have tried to replace these with ones I brought of ebay . But can't seem to clear the fault . I have attached some photos of my scan . I was wondering if the airbag module/ ecu would have stored hars codes and need to come out and be reset on a bench. Ife attached pics of the scan with codes followed by live data . I would really appreciate any help or ideas. Thanks |
Post Reply |
Bookmarks |
|
|