PROcede instal....is it scary?

RRGOO7 · 07-04-2007, 08:59 AM

Ive watched the video before but i wondering if seeing all those wires will really scare the heck out of me?

Im about to bite and go ahead and order the PROcede but im worried the install will be hard and ill mess something up.

ANyone in the MIA area wana help me out once i get it

533ogetnom · 07-04-2007, 09:22 AM

not scary for my, i regularly strip wires/solder and such though

jon@themshop · 07-04-2007, 09:27 AM

Quote:

Originally Posted by RRGOO7

Ive watched the video before but i wondering if seeing all those wires will really scare the heck out of me?

Im about to bite and go ahead and order the PROcede but im worried the install will be hard and ill mess something up.

Anyone in the MIA area wana help me out once i get it

Do you have any friends that are good with electrical work?

This is definitely an installation that you want to take your time on and not to rush it. My advice is to triple check your installation especially on the connectors were the pins are removed and replaced.

Good luck

ibd12nv · 07-04-2007, 09:27 AM

My wife could do it. It that easy. No soldering or spripping wires needed. Plug and drive.

DrDomer · 07-04-2007, 09:29 AM

Shiv's Mom did it.

heyitzkian · 07-04-2007, 09:30 AM

Ask Andy to do it because he's a electrical whore.

gonzo · 07-04-2007, 10:28 AM

Be careful...

AM335 · 07-04-2007, 11:16 AM

Pretty easy. Watch the video twice and have it available on a laptop while doing the installation. Also, print off a copy of the install notes by Ninjaneer and have those available while installing. Good luck and don't drive too fast.

NPDAN · 07-04-2007, 11:18 AM

No worries on the install. I was freaked out too until I did it.... Just keep the laptop close and go step by step. You'll be fine.

LACA335i · 07-04-2007, 11:20 AM

Quote:

Originally Posted by DrDomer

Shiv's Mom did it.

Funny comment.. Since Shv's Mom can do it.. Can your mother do too?

tek818 · 07-04-2007, 11:31 AM

I have never changed a tire or oil in my life and I thought the PROcede install was simple...

OpenFlash · 07-04-2007, 11:50 AM

I usually turn on all the lights and curl up with a blanket when I do a procede install

Soni · 07-04-2007, 11:57 AM

make sure your wirehardness are not loose...
car wouldn't start and throwing error then I re-checked everything and found out the wirehardness was loose.

LACA335i · 07-04-2007, 12:10 PM

Quote:

Originally Posted by shiv@vishnu

I usually turn on all the lights and curl up with a blanket when I do a procede install

hey Shv any new update for the v2... =) will it come out any time soon?

!Xoible · 07-04-2007, 12:16 PM

there's a vid on their website on how to do it. doesnt look too bad

RedGT3 · 07-04-2007, 12:17 PM

RRGoo7, did you get your car back. What was the problem.

DrDomer · 07-04-2007, 12:32 PM

Quote:

Originally Posted by LACA335i

Funny comment.. Since Shv's Mom can do it.. Can your mother do too?

Not sure .. Hmm.. Maybe I'll uninstall Procede and have my mom come over and reinstall. Naahhhh.... That's asking for trouble.

RRGOO7 · 07-04-2007, 04:47 PM

Quote:

Originally Posted by fll335

RRGoo7, did you get your car back. What was the problem.

not yet....the car is at the dealer awaiting a fuse :mad:

The water pump went bad in it....supposedly will be ready tommorow

e.n335 · 07-04-2007, 05:32 PM

Installing the PROcede is not scary at all. Just follow the installation video and don't try to be "creative"

at all.

If you don't like to do it by yourself or alone, ask a car hi-fi shop to assist. They have the skills you are looking for.

Cheers
Eugen

gonzo · 07-04-2007, 05:34 PM

Quote:

Originally Posted by eugen.niederreiter

Installing the PROcede is not scary at all. Just follow the instalation video and don't try to be "creative"

at all.

If you don't like to do it by yourself or alone, ask a car hi-fi shop to assist. They have the skills you are looking for.

Cheers
Eugen

Gone to the postal office yet?

j|rz44 · 07-04-2007, 05:37 PM

Quote:

Originally Posted by shiv@vishnu

I usually turn on all the lights and curl up with a blanket when I do a procede install

LMAO...
are you calling him a Pu**y?

Gonzo your a funny fukah too!

Looks easy man.... Dont be skurd!
Glad you've decided to keep your ride man!

GL

e.n335 · 07-04-2007, 05:37 PM

Quote:

Originally Posted by gonzo

Gone to the postal office yet?

can do in 8 hrs. it's 0h37 here

07-04-2007, 08:59 AM	#1
RRGOO7 Colonel 361 Rep 2,451 Posts Drives: GTR Join Date: Dec 2006 Location: Miami FL iTrader: (13)	PROcede instal....is it scary? Ive watched the video before but i wondering if seeing all those wires will really scare the heck out of me? Im about to bite and go ahead and order the PROcede but im worried the install will be hard and ill mess something up. ANyone in the MIA area wana help me out once i get it
	Appreciate 0 Tweet Quote

07-04-2007, 09:22 AM	#2
533ogetnom Banned 95 Rep 1,760 Posts Drives: 335coupe Join Date: Apr 2007 Location: Florida iTrader: (1)	not scary for my, i regularly strip wires/solder and such though
	Appreciate 0 Quote

07-04-2007, 09:27 AM	#4
ibd12nv Chief Warrant Officer 4 53 Rep 726 Posts Drives: 335I, E46 M3, X5M Join Date: Feb 2007 Location: Back in the US iTrader: (0) Garage List 2007 E90 335i [10.00]	My wife could do it. It that easy. No soldering or spripping wires needed. Plug and drive. __________________
	Appreciate 0 Quote

07-04-2007, 09:29 AM	#5
DrDomer Major 39 Rep 1,349 Posts Drives: 2004 330ci ZHP, 1999 Miata Join Date: Nov 2006 Location: Iowa iTrader: (0)	Shiv's Mom did it. __________________ Any man who can drive safely while kissing a pretty girl is simply not giving the kiss the attention it deserves. ~Albert Einstein
	Appreciate 0 Quote

07-04-2007, 09:30 AM	#6
heyitzkian Private 2 Rep 75 Posts Drives: E92 335i Join Date: Dec 2006 Location: Miami iTrader: (0)	Ask Andy to do it because he's a electrical whore.
	Appreciate 0 Quote

07-04-2007, 10:28 AM	#7
gonzo Lieutenant General 10208 Rep 14,401 Posts Drives: as many as possible Join Date: Jan 2007 Location: TeXXXas iTrader: (0)	Be careful... __________________ Crazy Diamond Last edited by gonzo; 08-07-2007 at 11:51 AM..
	Appreciate 0 Quote

07-04-2007, 11:16 AM	#8
AM335 Go Gators! 17 Rep 695 Posts Drives: E90 335i Join Date: Aug 2006 Location: Florida iTrader: (2) Garage List 2007 335i E90 [0.00]	Pretty easy. Watch the video twice and have it available on a laptop while doing the installation. Also, print off a copy of the install notes by Ninjaneer and have those available while installing. Good luck and don't drive too fast. __________________ 2007 E90 335i * Arctic * Black Leather * 6AT * ZSP * ZPP * PROcede V2 * Splitters * Blacklines * MORR VS7 * Rear Spoiler * Roof Spoiler * LUX4.0 * OEM STB * Speed Up My Computer .......... Aion Download
	Appreciate 0 Quote

07-04-2007, 11:18 AM	#9
NPDAN Colonel 95 Rep 2,573 Posts Drives: AW DCT M3 Join Date: Feb 2007 Location: So.Cal iTrader: (7) Garage List 2008 E92 M3 [8.00] 07' E92 335i [0.00]	No worries on the install. I was freaked out too until I did it.... Just keep the laptop close and go step by step. You'll be fine. __________________
	Appreciate 0 Quote

07-04-2007, 11:31 AM	#11
tek818 Lieutenant Colonel 136 Rep 1,954 Posts Drives: 2020 X3M Competition Join Date: Mar 2007 Location: Los Angeles, CA iTrader: (2) Garage List 2018 M3 ZCP [9.50]	I have never changed a tire or oil in my life and I thought the PROcede install was simple...
	Appreciate 0 Quote

07-04-2007, 11:50 AM	#12
OpenFlash 1743 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	I usually turn on all the lights and curl up with a blanket when I do a procede install
	Appreciate 0 Quote

07-04-2007, 11:57 AM	#13
Soni Major General 219 Rep 8,375 Posts Drives: Just a car Join Date: Feb 2007 Location: CANADA eh! iTrader: (35) Garage List 2007 335i Coupe [9.00]	make sure your wirehardness are not loose... car wouldn't start and throwing error then I re-checked everything and found out the wirehardness was loose.
	Appreciate 0 Quote

07-04-2007, 12:16 PM	#15
!Xoible Banned 839 Rep 46,029 Posts Drives: .... Join Date: Nov 2006 Location: . iTrader: (4) Garage List 2008 M3 [4.00] 2007 335i [9.00] 2008 528i [8.00] 2006 Infiniti - G35 ... [8.00]	there's a vid on their website on how to do it. doesnt look too bad
	Appreciate 0 Quote

07-04-2007, 12:17 PM	#16
RedGT3 Major 78 Rep 1,253 Posts Drives: .2 GT3/M3cs Join Date: Jun 2007 Location: FL iTrader: (3)	RRGoo7, did you get your car back. What was the problem.
	Appreciate 0 Quote

07-04-2007, 05:32 PM	#19
e.n335 Moderator 270 Rep 4,481 Posts Drives: e93 ///M3 DCT, 07/2009 Join Date: Feb 2007 Location: Switzerland, ZH iTrader: (0)	Installing the PROcede is not scary at all. Just follow the installation video and don't try to be "creative" at all. If you don't like to do it by yourself or alone, ask a car hi-fi shop to assist. They have the skills you are looking for. Cheers Eugen
	Appreciate 0 Quote