[Bavar-ian]

Has anyone coded the digital dash for being too dim at times when strong sunlight is shinning through?
I have the parameters to code my G05, not sure if they are the same.
Else i would probably try those on the F40.

[Manboy]

Yes, I've tried it and it works fine. I used Bimmercode:
Instriment Cluster > Expert Mode > DIM_DTN
Change Original value from 0x3f to a higher number for more brightness, for examble: 0x5f
Then Code

[Bavar-ian]

Originally Posted by Manboy

Yes, I've tried it and it works fine. I used Bimmercode:
Instriment Cluster > Expert Mode > DIM_DTN
Change Original value from 0x3f to a higher number for more brightness, for examble: 0x5f
Then Code

Oh yes. Tried it on the F40.
Works like the G series too.

[Bavar-ian]

Originally Posted by Manboy

Yes, I've tried it and it works fine. I used Bimmercode:
Instriment Cluster > Expert Mode > DIM_DTN
Change Original value from 0x3f to a higher number for more brightness, for examble: 0x5f
Then Code

I had 1 more parameter which was recommeded by the guys over at G05/6 group.
And lastly turn down the screen brightness at night to min.