|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
? on removing A-pillar trim for e93
|
|
08-08-2008, 03:29 PM | #1 |
Private
14
Rep 62
Posts |
? on removing A-pillar trim for e93
I want to hardwire my Valentine 1 to my e93 by running the wires for power and the concealed display down to the fuse box. Does anyone know how to remove the A-pillar trim from an e93. It does not have the SRS-airbag like the e90/92, so there are no visible screws to remove to free up the trim. I assume it pulls off somehow, but not sure which way. Thanks.
|
09-07-2008, 06:14 PM | #2 |
New Member
0
Rep 10
Posts |
You do it the very same way, like in the E90. The only difference is, that you have nothing to unscrew. Just grab the upper edge of the A-pillar trim with a firm grip, and pull it sideways into the direction of the other A-pillar. It's held by two plastic clips.
It's also a good idea to order clips (stock no: 51 43 0 141 024) before doing any work on the pillars, since they have to be exchanged when damaged. |
Appreciate
0
|
Bookmarks |
|
|