[lebaaron]

Originally Posted by yoon_209

looks great. for your rears is there any poke? did you have run any camber? if so what?

Thank you

No poke, maybe a tiny bit but it's minimum to be honest. I run this setup without any camber and it's fine so far.
I attached 2 pictures myahe you'd see better.

The guys from a reputable shop I been for the install told me it was more than fine.

I think on the picture 1 it's my angle that makes it that way... Anyway I let you judge!

[Jamaicalandwelove]

Originally Posted by AM340iMiami

I understand why BMW put skinny wheels on the M340i, but boy I wish they gave some wider options from the factory.

Supra wheels look good.

Yeah looked for oem wheels and the options suck.

[Jamaicalandwelove]

Originally Posted by mateodido

Finally!

First G20 with 893M!
Perfect match, perfect fitment!

No poke, flush with fenders, no spacers, OEM wheels, it doesn't get any better!

Even tough they are not forged, they are a bit lighter than stock 791M wheels.

Fronts: 12.3kg
Rears: 13.0kg

For all of you looking for perfect offsets and fitment, these are the numbers:

F: 8.5X19 ET25 225/40 R19 Michelin Pilot Sport 4S
R: 9.5x19 ET35 255/35 R19 Michelin Pilot Sport 4S

Fronts could use 5mm spacer, but I think it would be too aggressive!

Anyway, here are some quick photos. DSLR photos coming soon!

Yo aren’t those M5 rims???
And they look great

[Wet Fish]

Originally Posted by lebaaron

Thank you

No poke, maybe a tiny bit but it's minimum to be honest. I run this setup without any camber and it's fine so far.
I attached 2 pictures myahe you'd see better.

The guys from a reputable shop I been for the install told me it was more than fine.

I think on the picture 1 it's my angle that makes it that way... Anyway I let you judge!

Noticed the little mud flap. Where’d you get those? Look great.

[Jamaicalandwelove]

Originally Posted by lebaaron

Apex for the win -

$pec$:
. VS5-RS Staggered
. 19x9 ET25
. 19X10 ET38

Tire$:
. Khumo Ecsta PS71
245 40 19
275 35 19

That front lip where did you get it???
Finally saw 1 without the flicks at the end of them.

[lebaaron]

Originally Posted by Jamaicalandwelove

That front lip where did you get it???
Finally saw 1 without the flicks at the end of them.

Haha yes I know what you mean.. I had one like that actually but broke it twice in the snow. This one takes more of the bumper and I don't like so much... but it seems to be more solid for winter driving.

Here's the link
C$ 120.16 25%OFF | High Quality ABS Front Bumper Lip For BMW 3 Series Saloon G20 320i 325i 330i 360i 2019 2020 Diffuser Spoiler Protector Cover
https://a.aliexpress.com/_mKCjOvi

[lebaaron]

Originally Posted by Wet Fish

Noticed the little mud flap. Where’d you get those? Look great.

Thank you, actually the vendor I got them from closed but I found the same one and they are actually made for Tesla. But it's kind of universal and I tried to make them fit and the result was not so bad. I couldn't found one for our cars... If maybe someone suggest a link that would be nice

In the mean time, here's the creative way

C$ 14.67 30%OFF | For Tesla Model Y 2021 Fender Wheel Eyebrow Mudguard Body Front And Rear Anti-Collision Anti-Sand Black Modification Accessories
https://a.aliexpress.com/_m08wLLw

[mateodido]

Originally Posted by Jamaicalandwelove

Yo aren’t those M5 rims???
And they look great

Thanks. No, these are 893M, Performance Pack wheels for G42 M240i.

[yoon_209]

Originally Posted by lebaaron

Thank you

No poke, maybe a tiny bit but it's minimum to be honest. I run this setup without any camber and it's fine so far.
I attached 2 pictures myahe you'd see better.

The guys from a reputable shop I been for the install told me it was more than fine.

I think on the picture 1 it's my angle that makes it that way... Anyway I let you judge!

Looks good. I think the is the setup and offset I want to run. Thanks

[Jamaicalandwelove]

Originally Posted by lebaaron

Haha yes I know what you mean.. I had one like that actually but broke it twice in the snow. This one takes more of the bumper and I don't like so much... but it seems to be more solid for winter driving.

Here's the link
C$ 120.16 25%OFF | High Quality ABS Front Bumper Lip For BMW 3 Series Saloon G20 320i 325i 330i 360i 2019 2020 Diffuser Spoiler Protector Cover
https://a.aliexpress.com/_mKCjOvi

Thanks I rather this kind but I’ll make sure I use 3m tape instead of drilling holes

[Jamaicalandwelove]

Originally Posted by mateodido

Thanks. No, these are 893M, Performance Pack wheels for G42 M240i.

Oh, they look very similar.
They fit the car well I have to say.

[lebaaron]

Originally Posted by Jamaicalandwelove

Thanks I rather this kind but I’ll make sure I use 3m tape instead of drilling holes

I used VHB tape and it's plenty with the usual screws under the bumper which is fine -

[mateodido]

Originally Posted by Jamaicalandwelove

Oh, they look very similar.
They fit the car well I have to say.

Yep, the fitment is perfect. Thank you.

[flyknit]

Originally Posted by ssgm1x

Variant Radon Cold Forged 20" Wheels on my M340i xdriveAttachment 2890593

Attachment 2890594

May I know what front and rear spoiler you got there? Looks awesome!

[ssgm1x]

[QUOTE=flyknit;30086785]May I know what front and rear spoiler you got there? Looks awesome!

Front lip is from AA Concepts
Rear wing is from KiesMotorsports.com ( M Performance style wing )
Thank you !!!

[viciousmo]

Supra spec TE37's with 285/35 (R) and 245/40 (F)

[noname]

Originally Posted by viciousmo

Supra spec TE37's with 285/35 (R) and 245/40 (F)

That color matched spoiler is immaculate

[stangd1909]

Originally Posted by lebaaron

Apex for the win -

$pec$:
. VS5-RS Staggered
. 19x9 ET25
. 19X10 ET38

Tire$:
. Khumo Ecsta PS71
245 40 19
275 35 19

Love it, where did you buy this set up at?

[lebaaron]

Originally Posted by stangd1909

Love it, where did you buy this set up at?

Thank you, well I bought it at 2 different places locally. You can easily find it all online as well. Many good retailers on the forum!

[bimmerstar]

we getting some big rubber over here. more pics to come once on car soon!

[Geo_FF]

UPS man came early - finally received the group buy order, thanks Expert@ApexRaceParts ! Can't wait to get them fitted Saturday.

[vitooo]

Originally Posted by bimmerstar

we getting some big rubber over here. more pics to come once on car soon!

Let's goo! Contemplating this for my next tire setup. Do you mind sharing wheel specs and pics once mounted?