[brlight]

Hi there, I´m trying to update my CIC to C1A version but I´m getting this error :
What I´ve tried:
- Import SP Daten using BMW Coding Tool (Select Sp-Source->Update Sp-
Daten->Update WINKFP);
- Checked if Files were in Ediabas\ecu folder ->ok.
I´m trying to do the update through Icom Next and Icom B (Both connected OBD and MOST Connector), on Icom B both leds are green (System/MOST). I´ve used Easy Connect with the following options:
Type:REMOTE
IP: My Icom IP shown on Itoolradar
MODE:MOST_ASYNC
choosed ICOM Lock and clicked on check (NO errors were shown during the process).
I have no idea why I´m getting this error, any help is greatly apprecciated.

Edit: Managed to solve the error, issue was my ULF Module was not working properly,resulting in a faulty MOST ring break, after disconnecting it and bridging it with a MOST Loop I was able to proceed.

[brlight]

I don´t if it is better to create a new thread regarding my next issue regarding my CIC Firmware upgrade attempt, if it is better pls Admin just tell me.
So I managed to complete the first step (CI63F1)of upgrading my CIC Headunit
Part of the procedure can be seen here:

and after successfull upgrade:

After that I´ve tried to proceed to the next step the (CI62F1) but I keep getting this error:

I´ve been searching but couldn´t find solution for my issue, as always any help is greatly apprecciated.
Thank You.

Edit:Solved by manually choosing it, CIC updated successfull to C1A.