|
|
10-09-2023, 12:57 PM | #1 |
New Member
3
Rep 18
Posts |
Apex FL-5s 18x10.5 & 18x11
- Apex FL-5s 18x10.5+22 / 18x11+44 - $1000 No tires, still have the original boxes for shipping. - Apex 18mm spacers - $50 *Buyer pays shipping Last edited by Locked; 05-07-2024 at 02:55 PM.. Reason: SM-10s sold |
01-22-2024, 08:28 PM | #5 |
Colonel
1556
Rep 2,084
Posts |
pm sent
__________________
Current '21 DG X5MC, '22 X5M50i, '11 E90 M3
Recent Past '12 E92 M3 ZCP, '08 E93 M3, '18 F80 ZCP, '04 E46 M3 I think I have an M3 problem. |
Appreciate
0
|
05-07-2024, 02:53 PM | #6 |
New Member
3
Rep 18
Posts |
Price Drop...
Also, a few have asked about fitment on the FL-5s. I think this setup might be one of the most aggressive for stock fenders possible. I ran 295/315 A7s and A052s. With them I ran Vorshlag camber plates at -3.5 deg / -2.8 deg rear with MCS 2WNR, lowered a decent amount with 600/1000# springs. The rears rubbed the inner liner with the 18mm spacer enough to mark, but not go all the way through. The front I needed to run a 6 mm spacer to clear the strut. With the camber and stiffness, the outside of the fender wasn't an issue. The front liner marked, and eventually wore through the back wall. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|