03-07-2023, 01:30 PM | #1 |
New Member
2
Rep 5
Posts |
BMW 2 F44 GC can't read SAS ECU in E-SYS car running (no backup SVT)
Hello from The Netherlands!
Im a private owner, no dealer, so sorry for my limited technical knowledge: With my E-sys (22.10.00 and PsdzData 4.40.12) I can Read FA, read ECU's, VO Code, FDL code, but I do not see my SAS ECU. My car is running / or in diagnostic mode. Somewhere I read that may be an issue on G-series (although this is an F-serie but in E-sys the target is S18A). What I read: - Using a backup SVT this could possible be resolved? But I'm no dealer just a private person. How do I safely write an SVT having no backup? - Using I-step, a target SVT could be made? (where do I find my I-step and what would be the next actions to create a SVT safely?) Anyway, any suggestions are welcome to get my SAS ECU visible. Last edited by KVD-NL-BMW; 03-07-2023 at 01:51 PM.. |
03-09-2023, 09:03 AM | #2 |
New Member
2
Rep 5
Posts |
Think I have found the solution:
The F44 equiped with 5AQ + 5AS + 5DF (European version) has no SAS on board. Please see this picture: https://x3.xbimmers.com/forums/showp...45&postcount=5 |
Appreciate
0
|
03-12-2023, 08:51 AM | #3 | |
New Member
2
Rep 5
Posts |
Quote:
- So do not fully understand you, since with all the functions I have in my F44 I do (most likely, I assume) need no SAS. And to be precise, I have: - 5AQ= active guard plus - 5AS= Driving assistant - 5DF= ACC + Stop & Go - (5AT is NOT the same as 5AS + 5DF) - 5DM= Parking Assitance system This also includes S430 (Outside mirror dip) and S431 (inner mirror dip) and S8TF (Active Pedestrian Warning.) And in the DSC_BRS ECU module is indicated: C_SAS_verbaut=nicht verbaut (means that there is no SAS module installed). I assume that a SAS module is only required for 5AU in this F44 series. (5AU is btw not an option on the F44 series in The Netherlands) Last edited by KVD-NL-BMW; 03-12-2023 at 09:29 AM.. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|