[0002s]

Originally Posted by boosted

This is the excerpt from the thread:

"I just disconnected the electrical actuator that opens up the vacuum line to close the solenoid. This actuator is located right under the driver side taillight from inside. To get to it all you have to do is pop open the little cover in the trunk behind the taillight and you'll see the electrical connection on the bottom right side of the panel. There is a vacuum line coming into the solenoid and another one exiting before passing down through the trunk floor."



They also said that it stores an error code (not a cel) in the ecu that a dealer tech could read/see, but who knows if he would care or not. The error code is not limp mode or a cel, no decrease in performance, its just a logged code because the solenoid is disconnected.

-Chris

Thanks....:thumbup: