If you just want a little more bass there is no need to change everything. Just take the speaker outputs from the OEM amp (cut wires) and feed them into a good LOC, then RCA signal wires to the new amp, and then connect the speaker wires back with the OEM wires. Simple & cheap.
__________________
Mobridge DA2 > JBL MS-8 > ARC XDi 600/4 > JBL Gti 408 Mids & Vifa OT19 Tweeters; PG Ti2 1600.5 > Morel HCW-10 & IDMax 15
|